没有合适的资源?快使用搜索试试~ 我知道了~
资源推荐
资源详情
资源评论
Comments, suggestions, or questions on this document should be addressed to: Commander, Naval Sea Systems
Command, ATTN: SEA 05S, 1333 Isaac Hull Avenue, SE, Stop 5160, Washington Navy Yard DC 20376-5160 or
emailed to CommandStandards@navy.mil, with the subject line “Document Comment”. Since contact information
can change, you may want to verify the currency of this address information using the ASSIST Online database at
https://assist.dla.mil.
AMSC N/A FSC 6015
DISTRIBUTION STATEMENT A. Approved for public release. Distribution is unlimited.
METRIC
MIL-PRF-85045H
5 November 2021
SUPERSEDING
MIL-PRF-85045G
17 June 2014
PERFORMANCE SPECIFICATION
CABLES, FIBER OPTIC, GENERAL SPECIFICATION FOR
This specification is approved for use by all Departments and Agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This specification covers cables utilizing optical fibers for signal transmission.
1.2 Classification. Cables covered by this specification consist of one or more single fibers and optical
transmission elements with properties as specified in the applicable specification sheet (see 3.1) and are of the
following configuration types, classes, and applications:
1.2.1 Configuration type. The fiber optic cable configuration type (see 3.4.2) is designated by a single number
as indicated in table I.
Source: https://assist.dla.mil -- Downloaded: 2022-01-10T17:09Z
Check the source to verify that this is the current version before use.
MIL-PRF-85045H
2
TABLE I. Fiber optic cable configuration type.
Cable configuration type
Designation
Buffered fiber
1/
1
OFCC
2/
2
Cable bundle
3/
3
Ribbon cable
4/
4
Tube cable
5/
5
NOTES:
1/
The cable is constructed using buffered fibers
(see 6.5.2) with no individual protective jackets or
strength members.
2/
The cable is constructed using Optical Fiber Cable
Components (OFCC) (see 6.5.8) that are not grouped
into bundles having bundle jackets or binders
(see 6.5.4 and 6.5.1).
3/
The cable is constructed using buffered fibers or
OFCCs that are grouped into cable bundles (see 6.5.3)
with bundle jackets or binders.
4/
The cable is constructed using fiber ribbons
(see 6.5.9).
5/
The cable is constructed using hollow tubes or ducts.
1.2.2 Class. The class designation is defined by the mode volume of the optical fiber.
a. MM – Multimode
b. SM – Single-mode
1.2.3 Application. The application designation is defined by the intended application of the optical cable.
a. Airborne (A)
b. Shipboard (B)
c. Ground benign (G)
d. Space (S)
e. Ground tactical (T)
1.2.4 Part or identifying number (PIN). The PIN is constructed in accordance with the following:
M
85045
/X
-
XXXX
-
XXXX
Prefix for Military
Specification
Specification
Number
Spec Sheet
No.
Two-, three-, or
four-character
alpha numeric as
specified in the
applicable
specification sheet
(see 3.1)
Two sets of two-character
numeric when specified in
the applicable specification
sheet(see 3.1)
Examples: M85045/02-001
M85045/24-03-1872
Source: https://assist.dla.mil -- Downloaded: 2022-01-10T17:09Z
Check the source to verify that this is the current version before use.
MIL-PRF-85045H
3
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3 and 4 of this specification. This
section does not include documents cited in other sections of this specification or recommended for additional
information or as examples. While every effort has been made to ensure the completeness of this list, document
users are cautioned that they must meet all specified requirements of documents cited in sections 3 and 4 of this
specification, whether or not they are listed.
2.2 Government documents.
2.2.1 Specifications, standards, and handbooks. The following specifications, standards, and handbooks form a
part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents are
those cited in the solicitation or contract.
FEDERAL SPECIFICATIONS
TT-P-645
-
Paint, Alkyd Type, Formula Number 84
FEDERAL STANDARDS
FED-STD-228
-
Test Methods for Cables and Wire, Insulated
DEPARTMENT OF DEFENSE SPECIFICATIONS
MIL-DTL-901
-
Shock Tests, H.I. (High-Impact) Shipboard Machinery, Equipment, and
Systems, Requirements for
MIL-S-24235
-
Stuffing Tubes, Metal, and Packing Assemblies for Electric Cables, General
Specification for
MIL-DTL-24728
-
Interconnection Box, Fiber Optic, Metric, General Specification for
MIL-PRF-49291
-
Fiber, Optical, (Metric) General Specification for
(See ASSIST database for list of specification sheets.)
DEPARTMENT OF DEFENSE STANDARDS
MIL-STD-1678-2
-
Fiber Optic Cabling Systems Requirements and Measurements (Part 2: Optical
Measurements) (Part 2 of 6 Parts)
MIL-STD-1678-3
-
Fiber Optic Cabling Systems Requirements and Measurements, Physical,
Mechanical, Environmental and Material Measurements (Part 3 of 6 Parts)
MIL-STD-2003-4
-
Electric Plant Installation Standard Methods for Surface Ships and Submarines
(Cableways)
MIL-STD-2042
-
Fiber Optic Cable Topology Installation Standard Methods for Naval Ships
DEPARTMENT OF DEFENSE HANDBOOKS
MIL-HDBK-454
-
General Guidelines for Electronic Equipment
(Copies of these documents are available online at https://quicksearch.dla.mil.)
2.2.2 Other Government documents, drawings, and publications. The following other Government documents,
drawings, and publications form a part of this document to the extent specified herein. Unless otherwise specified,
the issues of these documents are those cited in the solicitation or contract.
Source: https://assist.dla.mil -- Downloaded: 2022-01-10T17:09Z
Check the source to verify that this is the current version before use.
MIL-PRF-85045H
4
NATIONAL AERONAUTICS AND SPACE ADMINISTRATION (NASA)
NASA-STD-6001
-
Flammability, Offgassing, and Compatibility Requirements and Test
Procedures
(Copies of this document are available online at https://standards.nasa.gov.)
NAVAL SEA SYSTEMS COMMAND (NAVSEA) PUBLICATIONS
S9510-AB-ATM-010
-
Nuclear Powered Submarine Atmosphere Control Manual
(Copies of this document are available online via Technical Data Management Information System (TDMIS) at
https://mercury.tdmis.navy.mil/. Refer questions, inquiries, or problems to: DSN 296-0669, Commercial
(805) 228-0669. This document is available for ordering (hard copy) via the Naval Logistics Library (NLL) at
https://nll.navsup.navy.mil. For questions regarding the NLL, contact the NLL Customer Service at
nllhelpdesk@navy.mil, (866) 817-3130, or (215) 697-2626/DSN 442-2626.)
2.3 Non-Government publications. The following documents form a part of this document to the extent
specified herein. Unless otherwise specified, the issues of these documents are those cited in the solicitation or
contract.
ASTM INTERNATIONAL
ASTM D470
-
Standard Test Methods for Crosslinked Insulations and Jackets for Wire and Cable
ASTM D1141
-
Standard Practice for the Preparation of Substitute Ocean Water
ASTM D1179
-
Standard Test Methods for Fluoride Ion in Water
ASTM D1246
-
Standard Test Method for Bromide Ion in Water
ASTM D3868
-
Standard Test Method for Fluoride Ions in Brackish Water, Seawater, and Brines
ASTM D3869
-
Standard Test Methods for Iodide and Bromide Ions in Brackish Water, Seawater,
and Brines
ASTM D4327
-
Standard Test Method for Anions in Water by Suppressed Ion Chromatography
ASTM E595
-
Standard Test Method for Total Mass Loss and Collected Volatile Condensable
Materials from Outgassing in a Vacuum Environment
ASTM E800
-
Standard Guide for Measurement of Gases Present or Generated During Fires
(Copies of these documents are available online at www.astm.org.)
INTERNATIONAL ELECTROTECHNICAL COMMISSION (IEC)
IEC 60794-1-21
-
Optical Fibre Cables – Part 1-21: Generic Specification – Basic Optical Cable
Test Procedures – Mechanical Test Methods
(Copies of this document are available online at www.iec.ch.)
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION (ISO)
ISO/IEC 17025
-
General Requirements for the Competence of Testing and Calibration Laboratories
(Copies of this document are available online at www.iso.org.)
Source: https://assist.dla.mil -- Downloaded: 2022-01-10T17:09Z
Check the source to verify that this is the current version before use.
MIL-PRF-85045H
5
TELECOMMUNICATIONS INDUSTRY ASSOCIATION (TIA)
TIA-455
-
Standard Test Procedure for Fiber Optic Fibers, Cables, Transducers, Sensors,
Connecting and Terminating Devices, and Other Fiber Optic Components
TIA-455-13
-
Visual and Mechanical Inspection of Fiber Optic Components, Devices, and
Assemblies
TIA-455-25
-
Impact Testing of Optical Fiber Cables
TIA-455-33
-
Optical Fiber Cable Tensile Loading and Bending Test
TIA-455-37
-
Low or High Temperature Bend Test for Fiber Optic Cable
TIA-455-39
-
Optical Fiber Cable Water Wicking Test
TIA455-41
-
Compressive Loading Resistance of Fiber Optic Cables
TIA/EIA-455-81
-
Compound Flow (Drip) Test for Filled Fiber Optic Cable
TIA-455-84
-
Jacket Self-Adhesion (Blocking) Test for Fiber Optic Cable
TIA-455-87
-
Fiber Optic Cable Knot Test
TIA/EIA-455-88
-
Fiber Optic Cable Bend Test
TIA-455-91
-
Fiber Optic Cable Twist-Bend Test
TIA-455-104
-
Fiber Optic Cable Cyclic Flexing Test
TIA-598
-
Optical Fiber Cable Color Coding
(Copies of these documents are available online at www.tiaonline.org.)
UK MINISTRY OF DEFENCE’S DIRECTORATE OF STANDARDISATION (DSTAN)
DEF STAN 07-247
-
Selection of Materials on the Basis of their Fire Characteristics
(Copies of this document are available online at www.dstan.mod.uk.)
UNDERWRITERS LABORATORIES, INC. (UL)
UL 1685
-
Vertical-Tray Fire-Propagation and Smoke-Release Test for Electrical and Optical-Fiber
Cables
(Copies of this document are available online at www.ul.com/.)
2.4 Order of precedence. Unless otherwise noted herein or in the contract, in the event of a conflict between
the text of this document and the references cited herein (except for related specification sheets), the text of this
document takes precedence. Nothing in this document, however, supersedes applicable laws and regulations unless
a specific exemption has been obtained.
3. REQUIREMENTS
3.1 Specification sheets. The individual item requirements shall be as specified herein and in accordance with
the applicable specification sheet. In the event of any conflict between the requirements of this specification and the
specification sheet, the latter shall govern (see 6.2).
3.2 Qualification. Fiber optic cables furnished under this specification shall be products that are authorized by
the qualifying activity for listing on the applicable qualified products list before contract award (see 4.5 and 6.3).
Source: https://assist.dla.mil -- Downloaded: 2022-01-10T17:09Z
Check the source to verify that this is the current version before use.
剩余47页未读,继续阅读
资源评论
phyit
- 粉丝: 7744
- 资源: 3055
上传资源 快速赚钱
- 我的内容管理 展开
- 我的资源 快来上传第一个资源
- 我的收益 登录查看自己的收益
- 我的积分 登录查看自己的积分
- 我的C币 登录后查看C币余额
- 我的收藏
- 我的下载
- 下载帮助
最新资源
- PHP基于ThinkPHP5.1的wms进销存系统源码带文字安装教程数据库 MySQL源码类型 WebForm
- AndoridAPI手机系统编程完整版chm最新版本
- DevSidecar 和 GithubSpeed安装包
- JAVAspringboot进销存管理系统源码带文字搭建教程数据库 MySQL源码类型 WebForm
- PHP的ThinkPHP6.0小说CMS管理系统源码带搭建教程数据库 MySQL源码类型 WebForm
- java实现的贪吃蛇小游戏.zip学习资料
- [] - 2024-10-09 IC虚拟机2024及资料分享.html
- Delphi 12 控件之DynaDynaPDF 4.0.94.265.rar
- Android开发中使用SQLite数据库的教程chm版最新版本
- PHP开源商城系统源码带搭建教程数据库 MySQL源码类型 WebForm
资源上传下载、课程学习等过程中有任何疑问或建议,欢迎提出宝贵意见哦~我们会及时处理!
点击此处反馈
安全验证
文档复制为VIP权益,开通VIP直接复制
信息提交成功