没有合适的资源?快使用搜索试试~ 我知道了~
(R2021) MIL-PRF-24667D-002.pdf
1.该资源内容由用户上传,如若侵权请联系客服进行举报
2.虚拟产品一经售出概不退款(资源遇到问题,请及时私信上传者)
2.虚拟产品一经售出概不退款(资源遇到问题,请及时私信上传者)
版权申诉
0 下载量 83 浏览量
2023-07-21
11:17:50
上传
评论
收藏 492KB PDF 举报
温馨提示
试读
39页
(R2021) MIL-PRF-24667D-002.pdf
资源推荐
资源详情
资源评论
Comments, suggestions, or questions on this document should be addressed to Commander, Naval Sea Systems
Command, ATTN: SEA 05S, 1333 Isaac Hull Avenue, SE, Stop 5160, Washington Navy Yard, DC 20376-5160 or
emailed to CommandStandards@navy.mil, with the subject line “Document Comment”. Since contact information
can change, you may want to verify the currency of this address information using the ASSIST Online database at
https://assist.dla.mil.
AMSC N/A FSC 8010
DISTRIBUTION STATEMENT A. Approved for public release. Distribution is unlimited.
INCH-POUND
MIL-PRF-24667D
16 February 2021
SUPERSEDING
MIL-PRF-24667C(SH)
w/INT. AMENDMENT 1
27 March 2018
MIL-PRF-24667C
22 May 2008
PERFORMANCE SPECIFICATION
COATING SYSTEM, NONSKID,
FOR ROLL OR SPRAY APPLICATION
This specification is approved for use by the Naval Sea Systems Command and is available for use by all
Departments and Agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This specification covers nonskid systems, coatings, and coverings for application to weather
decks, flight decks, and hangar decks of aircraft carriers, surface combatants, and amphibious, auxiliary, and sealift
ships, and submarines. Coatings are applied to steel, aluminum, and special hull treatment surfaces by spraying,
rolling, or other application method as designated by the manufacturer of the nonskid system.
1.2 Classification. The nonskid systems covered by this specification are of the following types, compositions,
classes, grades, and applications, as specified (see 6.2).
1.2.1 Types. The types of nonskid systems are as follows:
a. Type I - Standard durability, rollable
b. Type II - Standard durability, sprayable
c. Type III - Submerged applications, rollable
d. Type IV - Submerged applications, sprayable
e. Type V - Extended durability, rollable
f. Type VI - Extended durability, sprayable
1.2.2 Compositions. The compositions of nonskid systems are dependent on aggregate use and are categorized
as follows:
a. Composition D - Density-controlled abrasive deck system
b. Composition G - General use abrasive deck system
c. Composition L - Limited use aircraft carrier landing and run-out area deck system that is less abrasive to
the steel arresting cable
1.2.3 Classes. The classes of nonskid systems are segregated by functionality as follows:
a. Class 1 - Standard
Source: https://assist.dla.mil -- Downloaded: 2021-03-09T14:18Z
Check the source to verify that this is the current version before use.
MIL-PRF-24667D
2
b. Class 2 - Color stable
c. Class 3 - Low solar absorbent (LSA)
d. Class 4 - Resilient (for use where flexibility is required)
e. Class 5 - Submerged elastomeric applications
f. Class 6 - Low profile
g. Class 7 - High temperature
1.2.4 Grades. The grades of the nonskid system are based on the number of components in the coating:
a. Grade A - One component coating
b. Grade B - Two component coating
1.2.5 Application. The applications for nonskid systems are organized by cure characteristics as follows:
a. Application 1 - Standard cure
b. Application 2 - Fast cure
c. Application 3 - Low temperature cure
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3 and 4 of this specification. This
section does not include documents cited in other sections of this specification or recommended for additional
information or as examples. While every effort has been made to ensure the completeness of this list, document
users are cautioned that they must meet all specified requirements of documents cited in sections 3 and 4 of this
specification, whether or not they are listed.
2.2 Government documents.
2.2.1 Specifications, standards, and handbooks. The following specifications, standards, and handbooks form a
part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents are
those cited in the solicitation or contract.
COMMERCIAL ITEM DESCRIPTIONS
A-A-59982
-
Application Spray Equipment for Nonskid Coatings
A-A-59984
-
Mixer, Automated, Transportable, Nonskid Coating
DEPARTMENT OF DEFENSE SPECIFICATIONS
MIL-DTL-5624
-
Turbine Fuel, Aviation, Grades JP-4 and JP-5
MIL-D-16791
-
Detergents, General Purpose (Liquid, Nonionic)
MIL-S-22698
-
Steel Plate, Shapes and Bars, Weldable Ordinary Strength and Higher Strength:
Structural
MIL-PRF-23699
-
Lubricating Oil, Aircraft Turbine Engine, Synthetic Base, NATO Code Numbers:
O-152, O-154, O-156, and O-167
MIL-PRF-24385
-
Fire Extinguishing Agent, Aqueous Film-Forming Foam (AFFF) Liquid
Concentrate, for Fresh and Sea Water
MIL-PRF-32177
-
Cleaning Compound, Nonskid
MIL-PRF-83282
-
Hydraulic Fluid, Fire Resistant, Synthetic Hydrocarbon Base, Metric, NATO
Code Number H-537
Source: https://assist.dla.mil -- Downloaded: 2021-03-09T14:18Z
Check the source to verify that this is the current version before use.
MIL-PRF-24667D
3
DEPARTMENT OF DEFENSE STANDARDS
MIL-STD-1623
-
Fire Performance Requirements and Approved Specifications for Interior Finish
Materials and Furnishings (Naval Shipboard Use)
(Copies of these documents are available online at https://quicksearch.dla.mil.)
2.2.2 Other Government documents, drawings, and publications. The following other Government documents,
drawings, and publications form a part of this document to the extent specified herein. Unless otherwise specified,
the issues of these documents are those cited in the solicitation or contract.
CODE OF FEDERAL REGULATIONS (CFR)
29 CFR 1910
-
Occupational Safety and Health Standards
40 CFR 60, Appendix
A-7, Method 24
-
Determination of Volatile Matter Content, Water Content, Density, Volume
Solids, and Weight Solids of Surface Coatings
40 CFR 63
-
National Emission Standards for Hazardous Air Pollutants for Source
Categories
40 CFR 63, Subpart II
-
National Emission Standards for Shipbuilding and Ship Repair (Surface
Coating)
40 CFR 261.24
-
Toxicity Characteristic
(Copies of these documents are available online at www.ecfr.gov.)
ENVIRONMENTAL PROTECTION AGENCY (EPA)
EPA SW-846
-
Test Methods for Evaluating Solid Waste: Physical/Chemical Methods
(Copies of this document are available online at www.epa.gov.)
NATIONAL INSTITUTE FOR OCCUPATIONAL SAFETY AND HEALTH (NIOSH)
NIOSH Manual of Analytical Methods (NMAM),
Method 7500
-
Silica, Crystalline, by XRD (Filter Redeposition)
(Copies of this document are available online at www.cdc.gov.)
NAVAL SEA SYSTEMS COMMAND (NAVSEA) PUBLICATIONS
T9070-AL-DPC-020/077-2
-
NAVSEA Hazardous Material Avoidance Process
(Copies of this document are available online via Technical Data Management Information System (TDMIS) at
https://mercury.tdmis.navy.mil/ by searching for the document number without the suffix. Refer questions,
inquiries, or problems to: DSN 296-0669, Commercial (805) 228-0669. This document is available for ordering
(hard copy) via the Naval Logistics Library (NLL) https://nll.navsup.navy.mil. For questions regarding the NLL,
contact the NLL customer service at nllhelpdesk@navy.mil, (866) 817-3130 or (215) 697-2626/DSN 442-2626.)
2.3 Non-Government publications. The following documents form a part of this document to the extent
specified herein. Unless otherwise specified, the issues of these documents are those cited in the solicitation or
contract.
ASTM INTERNATIONAL
ASTM A229/A229M
-
Standard Specification for Steel Wire, Quenched and Tempered for
Mechanical Springs
ASTM A514/A514M
-
Standard Specification for High-Yield-Strength, Quenched and Tempered
Alloy Steel Plate, Suitable for Welding
Source: https://assist.dla.mil -- Downloaded: 2021-03-09T14:18Z
Check the source to verify that this is the current version before use.
MIL-PRF-24667D
4
ASTM B117
-
Standard Practice for Operating Salt Spray (Fog) Apparatus
ASTM B928/B928M
-
Standard Specification for High Magnesium Aluminum-Alloy Products for
Marine Service and Similar Environments
ASTM C136/C136M
-
Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates
ASTM D523
-
Standard Test Method for Specular Gloss
ASTM D660
-
Standard Test Method for Evaluating Degree of Checking of Exterior Paints
ASTM D661
-
Standard Test Method for Evaluating Degree of Cracking of Exterior Paints
ASTM D714
-
Standard Test Method for Evaluating Degree of Blistering of Paints
ASTM D823
-
Standard Practices for Producing Films of Uniform Thickness of Paint,
Coatings, and Related Products on Test Panels
ASTM D1141
-
Standard Practice for the Preparation of Substitute Ocean Water
ASTM D1640/D1640M
-
Standard Test Methods for Drying, Curing, or Film Formation of Organic
Coatings
ASTM D1652
-
Standard Test Method for Epoxy Content of Epoxy Resins
ASTM D1654
-
Standard Test Method for Evaluation of Painted or Coated Specimens
Subjected to Corrosive Environments
ASTM D1895
-
Standard Test Methods for Apparent Density, Bulk Factor, and Pourability
of Plastic Materials
ASTM D2000
-
Standard Classification System for Rubber Products in Automotive
Applications
ASTM D2572
-
Standard Test Method for Isocyanate Groups in Urethane Materials or
Prepolymers
ASTM D3278
-
Standard Test Methods for Flash Point of Liquids by Small Scale Closed-
Cup Apparatus
ASTM D3924
-
Standard Specification for Standard Environment for Conditioning and
Testing Paint, Varnish, Lacquer, and Related Materials
ASTM D4214
-
Standard Test Methods for Evaluating the Degree of Chalking of Exterior
Paint Films
ASTM D4417
-
Standard Test Methods for Field Measurement of Surface Profile of Blast
Cleaned Steel
ASTM D4541
-
Standard Test Method for Pull-Off Strength of Coatings Using Portable
Adhesion Testers
ASTM E903
-
Standard Test Method for Solar Absorptance, Reflectance, and
Transmittance of Materials Using Integrating Spheres
ASTM E1252
-
Standard Practice for General Techniques for Obtaining Infrared Spectra
for Qualitative Analysis
ASTM E1347
-
Standard Test Method for Color and Color-Difference Measurement by
Tristimulus Colorimetry
Source: https://assist.dla.mil -- Downloaded: 2021-03-09T14:18Z
Check the source to verify that this is the current version before use.
MIL-PRF-24667D
5
ASTM F137
-
Standard Test Method for Flexibility of Resilient Flooring Materials with
Cylindrical Mandrel Apparatus
ASTM F718
-
Standard Specification for Shipbuilders and Marine Paints and Coatings
Product/Procedure Data Sheet
ASTM G8
-
Standard Test Methods for Cathodic Disbonding of Pipeline Coatings
ASTM G14
-
Standard Test Method for Impact Resistance of Pipeline Coatings (Falling
Weight Test)
ASTM G154
-
Standard Practice for Operating Fluorescent Ultraviolet (UV) Lamp
Apparatus for Exposure of Nonmetallic Materials
ASTM G173
-
Standard Tables for Reference Solar Spectral Irradiances: Direct Normal
and Hemispherical on 37° Tilted Surface
(Copies of these documents are available online at www.astm.org.)
SAE INTERNATIONAL
SAE-AMS1424
-
Deicing/Anti-Icing Fluid, Aircraft, SAE Type 1
SAE-AMS-STD-595
-
Colors Used in Government Procurement
SAE-AMS-STD-595/11105
-
Red, Gloss, OSHA Safety Red/Department of Transportation Highway
Red
SAE-AMS-STD-595/11136
-
Insignia Red, Gloss
SAE-AMS-STD-595/13538
-
Yellow, Gloss
SAE-AMS-STD-595/14062
-
Deep Green, Gloss
SAE-AMS-STD-595/14088
-
Olive Drab Green, Gloss
SAE-AMS-STD-595/15177
-
Blue, Gloss
SAE-AMS-STD-595/15182
-
Blue, Gloss, Coast Guard Blue
SAE-AMS-STD-595/16076
-
Dark Gray, Gloss
SAE-AMS-STD-595/17038
-
Black, Gloss
SAE-AMS-STD-595/17875
-
Insignia White, Gloss
SAE-AMS-STD-595/17925
-
Miscellaneous, Gloss, Bright White
SAE-AMS-STD-595/26008
-
Deck Gray, Semi-Gloss
SAE-AMS-STD-595/26270
-
Haze Gray, Semi-Gloss
SAE-AMS-STD-595/31136
-
International Red, Flat
SAE-AMS-STD-595/33538
-
Yellow, Flat
SAE-AMS-STD-595/34088
-
Olive Drab Green, Flat
SAE-AMS-STD-595/36076
-
Dark Gray, Flat
SAE-AMS-STD-595/36173
-
Ocean Gray, Flat
SAE-AMS-STD-595/36231
-
International Gray, Flat
Source: https://assist.dla.mil -- Downloaded: 2021-03-09T14:18Z
Check the source to verify that this is the current version before use.
剩余38页未读,继续阅读
资源评论
phyit
- 粉丝: 7648
- 资源: 2803
上传资源 快速赚钱
- 我的内容管理 展开
- 我的资源 快来上传第一个资源
- 我的收益 登录查看自己的收益
- 我的积分 登录查看自己的积分
- 我的C币 登录后查看C币余额
- 我的收藏
- 我的下载
- 下载帮助
安全验证
文档复制为VIP权益,开通VIP直接复制
信息提交成功