SH1106-V2.3资源-CSDN文库

SH1106

93 浏览量 2024-05-12 16:01:58 上传评论收藏 716KB PDF 举报

资源推荐

资源详情

资源评论

SH1106

132 X 64 Dot Matrix OLED/PLED

Segment/Common Driver with Controller

1 V2.3

Features

n Support maximum 132 X 64 dot matrix panel

n Embedded 132 X 64 bits SRAM

n Operating voltage:

- Logic voltage supply: VDD1 = 1.65V - 3.5V

- DC-DC voltage supply: VDD2 = 3.0V - 4.2V

- OLED Operating voltage supply:

External VPP supply = 6.4V - 14.0V

Internal VPP generator = 6.4V - 9.0V

n Maximum segment output current: 200mA

n Maximum common sink current: 27mA

n 8-bit 6800-series parallel interface, 8-bit 8080-series

parallel interface, 3-wire & 4-wire serial peripheral

interface, 400KHz fast I

C bus interface

n Programmable frame frequency and multiplexing ratio

n Row re-mapping and column re-mapping (ADC)

n Vertical scrolling

n On-chip oscillator

n Programmable Internal charge pump circuit output

n 256-step contrast control on monochrome passive OLED

panel

n Low power consumption

- Sleep mode: <5mA

- VDD1=0V，VDD2=3.0V – 4.2V: <5mA

- VDD1,2=0V，VPP=6.4V –14.0V: <5mA

n Wide range of operating temperatures: -40 to +85°C

n Available in COG form, thickness: 300mm

General Description

SH1106 is a single-chip CMOS OLED/PLED driver with controller for organic/polymer light emitting diode dot-matrix graphic

display system. SH1106 consists of 132 segments, 64 commons that can support a maximum display resolution of 132 X 64. It

is designed for Common Cathode type OLED panel.

SH1106 embeds with contrast control, display RAM oscillator and efficient DC-DC converter, which reduces the number of

external components and power consumption. SH1106 is suitable for a wide range of compact portable applications, such as

sub-display of mobile phone, calculator and MP3 player, etc.

SH1106

System Bus Connection Pads

Symbol I/O Description

CL I/O

This pad is the system clock input. When internal clock is enabled, this pad should be

Left open. The internal clock is output from this pad. When internal oscillator

is disabled, this pad

receives display clock signal from external clock source.

CLS I

This is the internal clock enable pad.

CLS = “H”: Internal oscillator circuit is enabled.

CLS = “L”: Internal oscillator circuit is disabled (requires external input).

When CLS = “L”, an external clock source must be connected to the CL pad for normal operation.

IM0

IM1

IM2

These are the MPU interface mode select pads.

8080 I

C 6800 4-wire SPI

3-wire SPI

IM0 0 0 0 0 1

IM1 1 1 0 0 0

IM2 1 0 1 0 0

This pad is the chip select input. When

= “L”, then the chip select becomes active,

and data/command I/O is enabled.

RES

This is a reset signal input pad. When

RES

is set to “L”, the settings are initialized. The reset

operation is performed by the

RES

signal level.

A0 I

This is the Data/Command control pad that determines whether the data bits are data or a

command.

A0 = “H”: the inputs at D0 to D7 are treated as display data.

A0 = “L”: the inputs at D0 to D7 are transferred to the command registers.

In I

C interface, this pad serves as SA0 to distinguish the different address of OLED driver.

(

WR/

)

This is a MPU interface input pad.

When connected to an 8080 MPU, this is active LOW. This pad connects to the 8080 MPU

signal. The signals on the data bus are latched at the rising edge of the

signal.

When connected to a 6800 Series MPU: This is the read/write control signal input terminal.

When

WR/

= “H”: Read.

When

WR/

= “L”: Write.

(E)

This is a MPU interface input pad.

When connected to an 8080 series MPU, it is active LOW. This pad is connected to the

signal

of the 8080 series MPU, and the data bus is in an output status when this signal is “L”.

When connected to a 6800 series MPU , this is active HIGH. This is used as an enable clock

input of the 6800 series MPU.

When

= “H”: Enable.

When

= “L”: Disable.

D0 - D7

(SCL)

(SI/SDA)

I/O

This is an 8-bit bi-directional data bus that connects to an 8-bit or 16-bit standard MPU data bus.

When the serial interface is selected, then D0 serves as the serial clock input pad (SCL) and D1

serves as the serial data input pad (SI). At this time, D2 to D7 are set to high impedance.

When the I

C interface is selected, then D0 serves as the serial clock input pad (SCL) and D1

serves as the serial data input pad (SDAI). At this time, D2 to D7 are set to high impedance.

剩余48页未读，继续阅读

评论收藏

内容反馈

那个菜鸡

粉丝: 89
资源: 2

SH1106-V2.3

SH1106液晶数据手册

OLED主控芯片SH1106数据手册 V2.3（英文）

Guapcoin-MN-Install-2.3.0.1：这是2.3.1 MasterNode Install的预发行版本，它支持Ubuntu 16.04及更高版本。 使用风险自负，并报告任何问题

PDroid-v1.32-miui_Mioneplus_2.3.6f_erlj8olvx7_2.3

常用的jar包

oled文档资料及驱动程序

0.96寸和1.3寸OLED显示模块软硬件资料OLED(128x64)单片机驱动源码软件例程源码.zip

gitlab-runner-windows-amd64&node-v6.17.0-x64

CWM-REC-V6.0.3.3-CHN:基于CWM V6.0.3.3的中文刷机系统-附加强化功能

又拍云命令行工具v0.2.3forlinux32位官方最新免费版

MATLAB用于支持向量机-svm_v251.rar

smallRNA-polymRNA:小RNA和多核糖体测序数据的处理和分析

busybox pro汉化版

SP_Flash_Tool_exe_Linux_v5.1928.01.100.7z

2020易语言模块大全持续更新1.zip

Busybox for Android v1.20.2

KA2206B手册

pocket48_for_gnz:监控gnz48官博,口袋48房间消息,直播,b站投稿更新等

RTL8188C_8192C_USB_linux_v3.4.4_4749.20121105.zip

STM32 ULN2003驱动28BYJ-48 工程源码文件

STM32项目设计：基于stm32f1的智能门锁（附项目视频全套教程）

第14届蓝桥杯单片机省赛题目

一包下载Keil5(MDK)带工具与教程

STM32C8T6最小系统板原理图及PCB

Keil5固件支持包(stm32f1xx/gd32f30x/nxplpc54114/stm32mp1xx)

win10 win11 CH340 USB串口驱动

2020级天津大学数字逻辑ALU4BITS（vivado）实验相关

VisualGDB 5.6 R9//支持VS2008-VS2022

第15届蓝桥杯EDA省赛真题

最新资源

Guapcoin-MN-Install-2.3.0.1：这是2.3.1 MasterNode Install的预发行版本，它支持Ubuntu 16.04及更高版本。使用风险自负，并报告任何问题