sfuntmpl_basic.rar_微分跟踪_跟踪微分

/* * sfuntmpl_basic.c: Basic 'C' template for a level 2 S-function. * * ------------------------------------------------------------------------- * | See matlabroot/simulink/src/sfuntmpl_doc.c for a more detailed template | * ------------------------------------------------------------------------- * * Copyright 1990-2002 The MathWorks, Inc. * $Revision: 1.27 $ */ /* * You must specify the S_FUNCTION_NAME as the name of your S-function * (i.e. replace sfuntmpl_basic with the name of your S-function). */ #define S_FUNCTION_NAME sfuntmpl_basic #define S_FUNCTION_LEVEL 2 /* * Need to include simstruc.h for the definition of the SimStruct and * its associated macro definitions. */ #include "simstruc.h" /* Error handling * -------------- * * You should use the following technique to report errors encountered within * an S-function: * * ssSetErrorStatus(S,"Error encountered due to ..."); * return; * * Note that the 2nd argument to ssSetErrorStatus must be persistent memory. * It cannot be a local variable. For example the following will cause * unpredictable errors: * * mdlOutputs() * { * char msg[256]; {ILLEGAL: to fix use "static char msg[256];"} * sprintf(msg,"Error due to %s", string); * ssSetErrorStatus(S,msg); * return; * } * * See matlabroot/simulink/src/sfuntmpl_doc.c for more details. */ /*====================* * S-function methods * *====================*/ /* Function: mdlInitializeSizes =============================================== * Abstract: * The sizes information is used by Simulink to determine the S-function * block's characteristics (number of inputs, outputs, states, etc.). */ static void mdlInitializeSizes(SimStruct *S) { /* See sfuntmpl_doc.c for more details on the macros below */ ssSetNumSFcnParams(S, 0); /* Number of expected parameters */ if (ssGetNumSFcnParams(S) != ssGetSFcnParamsCount(S)) { /* Return if number of expected != number of actual parameters */ return; } ssSetNumContStates(S, 0); ssSetNumDiscStates(S, 0); if (!ssSetNumInputPorts(S, 1)) return; ssSetInputPortWidth(S, 0, 1); ssSetInputPortRequiredContiguous(S, 0, true); /*direct input signal access*/ /* * Set direct feedthrough flag (1=yes, 0=no). * A port has direct feedthrough if the input is used in either * the mdlOutputs or mdlGetTimeOfNextVarHit functions. * See matlabroot/simulink/src/sfuntmpl_directfeed.txt. */ ssSetInputPortDirectFeedThrough(S, 0, 1); if (!ssSetNumOutputPorts(S, 1)) return; ssSetOutputPortWidth(S, 0, 1); ssSetNumSampleTimes(S, 1); ssSetNumRWork(S, 0); ssSetNumIWork(S, 0); ssSetNumPWork(S, 0); ssSetNumModes(S, 0); ssSetNumNonsampledZCs(S, 0); ssSetOptions(S, 0); } /* Function: mdlInitializeSampleTimes ========================================= * Abstract: * This function is used to specify the sample time(s) for your * S-function. You must register the same number of sample times as * specified in ssSetNumSampleTimes. */ static void mdlInitializeSampleTimes(SimStruct *S) { ssSetSampleTime(S, 0, CONTINUOUS_SAMPLE_TIME); ssSetOffsetTime(S, 0, 0.0); } #define MDL_INITIALIZE_CONDITIONS /* Change to #undef to remove function */ #if defined(MDL_INITIALIZE_CONDITIONS) /* Function: mdlInitializeConditions ======================================== * Abstract: * In this function, you should initialize the continuous and discrete * states for your S-function block. The initial states are placed * in the state vector, ssGetContStates(S) or ssGetRealDiscStates(S). * You can also perform any other initialization activities that your * S-function may require. Note, this routine will be called at the * start of simulation and if it is present in an enabled subsystem * configured to reset states, it will be call when the enabled subsystem * restarts execution to reset the states. */ static void mdlInitializeConditions(SimStruct *S) { } #endif /* MDL_INITIALIZE_CONDITIONS */ #define MDL_START /* Change to #undef to remove function */ #if defined(MDL_START) /* Function: mdlStart ======================================================= * Abstract: * This function is called once at start of model execution. If you * have states that should be initialized once, this is the place * to do it. */ static void mdlStart(SimStruct *S) { } #endif /* MDL_START */ /* Function: mdlOutputs ======================================================= * Abstract: * In this function, you compute the outputs of your S-function * block. Generally outputs are placed in the output vector, ssGetY(S). */ static void mdlOutputs(SimStruct *S, int_T tid) { const real_T *u = (const real_T*) ssGetInputPortSignal(S,0); real_T *y = ssGetOutputPortSignal(S,0); y[0] = u[0]; } #define MDL_UPDATE /* Change to #undef to remove function */ #if defined(MDL_UPDATE) /* Function: mdlUpdate ====================================================== * Abstract: * This function is called once for every major integration time step. * Discrete states are typically updated here, but this function is useful * for performing any tasks that should only take place once per * integration step. */ static void mdlUpdate(SimStruct *S, int_T tid) { } #endif /* MDL_UPDATE */ #define MDL_DERIVATIVES /* Change to #undef to remove function */ #if defined(MDL_DERIVATIVES) /* Function: mdlDerivatives ================================================= * Abstract: * In this function, you compute the S-function block's derivatives. * The derivatives are placed in the derivative vector, ssGetdX(S). */ static void mdlDerivatives(SimStruct *S) { } #endif /* MDL_DERIVATIVES */ /* Function: mdlTerminate ===================================================== * Abstract: * In this function, you should perform any actions that are necessary * at the termination of a simulation. For example, if memory was * allocated in mdlStart, this is the place to free it. */ static void mdlTerminate(SimStruct *S) { } /*======================================================* * See sfuntmpl_doc.c for the optional S-function methods * *======================================================*/ /*=============================* * Required S-function trailer * *=============================*/ #ifdef MATLAB_MEX_FILE /* Is this file being compiled as a MEX-file? */ #include "simulink.c" /* MEX-file interface mechanism */ #else #include "cg_sfun.h" /* Code generation registration function */ #endif