/*
* File: lsm_1.c
*
*
* --- THIS FILE GENERATED BY S-FUNCTION BUILDER: 3.0 ---
*
* This file is an S-function produced by the S-Function
* Builder which only recognizes certain fields. Changes made
* outside these fields will be lost the next time the block is
* used to load, edit, and resave this file. This file will be overwritten
* by the S-function Builder block. If you want to edit this file by hand,
* you must change it only in the area defined as:
*
* %%%-SFUNWIZ_defines_Changes_BEGIN
* #define NAME 'replacement text'
* %%% SFUNWIZ_defines_Changes_END
*
* DO NOT change NAME--Change the 'replacement text' only.
*
* For better compatibility with the Simulink Coder, the
* "wrapper" S-function technique is used. This is discussed
* in the Simulink Coder's Manual in the Chapter titled,
* "Wrapper S-functions".
*
* -------------------------------------------------------------------------
* | See matlabroot/simulink/src/sfuntmpl_doc.c for a more detailed template |
* -------------------------------------------------------------------------
*
* Created: Mon Apr 29 23:21:12 2019
*/
#define S_FUNCTION_LEVEL 2
#define S_FUNCTION_NAME lsm_1
/*<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<*/
/* %%%-SFUNWIZ_defines_Changes_BEGIN --- EDIT HERE TO _END */
#define NUM_INPUTS 1
/* Input Port 0 */
#define IN_PORT_0_NAME u0
#define INPUT_0_WIDTH 5
#define INPUT_DIMS_0_COL 1
#define INPUT_0_DTYPE real_T
#define INPUT_0_COMPLEX COMPLEX_NO
#define IN_0_FRAME_BASED FRAME_NO
#define IN_0_BUS_BASED 0
#define IN_0_BUS_NAME
#define IN_0_DIMS 1-D
#define INPUT_0_FEEDTHROUGH 1
#define IN_0_ISSIGNED 0
#define IN_0_WORDLENGTH 8
#define IN_0_FIXPOINTSCALING 1
#define IN_0_FRACTIONLENGTH 9
#define IN_0_BIAS 0
#define IN_0_SLOPE 0.125
#define NUM_OUTPUTS 1
/* Output Port 0 */
#define OUT_PORT_0_NAME y0
#define OUTPUT_0_WIDTH 4
#define OUTPUT_DIMS_0_COL 1
#define OUTPUT_0_DTYPE real_T
#define OUTPUT_0_COMPLEX COMPLEX_NO
#define OUT_0_FRAME_BASED FRAME_NO
#define OUT_0_BUS_BASED 0
#define OUT_0_BUS_NAME
#define OUT_0_DIMS 1-D
#define OUT_0_ISSIGNED 1
#define OUT_0_WORDLENGTH 8
#define OUT_0_FIXPOINTSCALING 1
#define OUT_0_FRACTIONLENGTH 3
#define OUT_0_BIAS 0
#define OUT_0_SLOPE 0.125
#define NPARAMS 0
#define SAMPLE_TIME_0 0.1
#define NUM_DISC_STATES 20
#define DISC_STATES_IC [0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0]
#define NUM_CONT_STATES 0
#define CONT_STATES_IC [0]
#define SFUNWIZ_GENERATE_TLC 1
#define SOURCEFILES "__SFB__"
#define PANELINDEX 8
#define USE_SIMSTRUCT 0
#define SHOW_COMPILE_STEPS 0
#define CREATE_DEBUG_MEXFILE 0
#define SAVE_CODE_ONLY 0
#define SFUNWIZ_REVISION 3.0
/* %%%-SFUNWIZ_defines_Changes_END --- EDIT HERE TO _BEGIN */
/*<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<*/
#include "simstruc.h"
extern void lsm_1_Start_wrapper(real_T *xD);
extern void lsm_1_Outputs_wrapper(const real_T *u0,
real_T *y0,
const real_T *xD);
extern void lsm_1_Update_wrapper(const real_T *u0,
real_T *y0,
real_T *xD);
/*====================*
* S-function methods *
*====================*/
/* Function: mdlInitializeSizes ===============================================
* Abstract:
* Setup sizes of the various vectors.
*/
static void mdlInitializeSizes(SimStruct *S)
{
DECL_AND_INIT_DIMSINFO(inputDimsInfo);
DECL_AND_INIT_DIMSINFO(outputDimsInfo);
ssSetNumSFcnParams(S, NPARAMS);
if (ssGetNumSFcnParams(S) != ssGetSFcnParamsCount(S)) {
return; /* Parameter mismatch will be reported by Simulink */
}
ssSetSimStateCompliance(S, USE_DEFAULT_SIM_STATE);
ssSetNumContStates(S, NUM_CONT_STATES);
ssSetNumDiscStates(S, NUM_DISC_STATES);
if (!ssSetNumInputPorts(S, NUM_INPUTS)) return;
ssSetInputPortWidth(S, 0, INPUT_0_WIDTH);
ssSetInputPortDataType(S, 0, SS_DOUBLE);
ssSetInputPortComplexSignal(S, 0, INPUT_0_COMPLEX);
ssSetInputPortDirectFeedThrough(S, 0, INPUT_0_FEEDTHROUGH);
ssSetInputPortRequiredContiguous(S, 0, 1); /*direct input signal access*/
if (!ssSetNumOutputPorts(S, NUM_OUTPUTS)) return;
ssSetOutputPortWidth(S, 0, OUTPUT_0_WIDTH);
ssSetOutputPortDataType(S, 0, SS_DOUBLE);
ssSetOutputPortComplexSignal(S, 0, OUTPUT_0_COMPLEX);
ssSetNumPWork(S, 0);
ssSetNumSampleTimes(S, 1);
ssSetNumRWork(S, 0);
ssSetNumIWork(S, 0);
ssSetNumModes(S, 0);
ssSetNumNonsampledZCs(S, 0);
ssSetSimulinkVersionGeneratedIn(S, "9.1");
/* Take care when specifying exception free code - see sfuntmpl_doc.c */
ssSetOptions(S, (SS_OPTION_EXCEPTION_FREE_CODE |
SS_OPTION_USE_TLC_WITH_ACCELERATOR |
SS_OPTION_WORKS_WITH_CODE_REUSE));
}
#if defined(MATLAB_MEX_FILE)
#define MDL_SET_INPUT_PORT_DIMENSION_INFO
static void mdlSetInputPortDimensionInfo(SimStruct *S,
int_T port,
const DimsInfo_T *dimsInfo)
{
if(!ssSetInputPortDimensionInfo(S, port, dimsInfo)) return;
}
#endif
#define MDL_SET_OUTPUT_PORT_DIMENSION_INFO
#if defined(MDL_SET_OUTPUT_PORT_DIMENSION_INFO)
static void mdlSetOutputPortDimensionInfo(SimStruct *S,
int_T port,
const DimsInfo_T *dimsInfo)
{
if (!ssSetOutputPortDimensionInfo(S, port, dimsInfo)) return;
}
#endif
/* Function: mdlInitializeSampleTimes =========================================
* Abstract:
* Specifiy the sample time.
*/
static void mdlInitializeSampleTimes(SimStruct *S)
{
ssSetSampleTime(S, 0, SAMPLE_TIME_0);
ssSetModelReferenceSampleTimeDefaultInheritance(S);
ssSetOffsetTime(S, 0, 0.0);
}
#define MDL_INITIALIZE_CONDITIONS
/* Function: mdlInitializeConditions ========================================
* Abstract:
* Initialize the states
*/
static void mdlInitializeConditions(SimStruct *S)
{
real_T *xD = ssGetRealDiscStates(S);
xD[0] = 0;
xD[1] = 0;
xD[2] = 0;
xD[3] = 0;
xD[4] = 0;
xD[5] = 0;
xD[6] = 0;
xD[7] = 0;
xD[8] = 0;
xD[9] = 0;
xD[10] = 0;
xD[11] = 0;
xD[12] = 0;
xD[13] = 0;
xD[14] = 0;
xD[15] = 0;
xD[16] = 0;
xD[17] = 0;
xD[18] = 0;
xD[19] = 0;
}
#define MDL_SET_INPUT_PORT_DATA_TYPE
static void mdlSetInputPortDataType(SimStruct *S, int port, DTypeId dType)
{
ssSetInputPortDataType(S, 0, dType);
}
#define MDL_SET_OUTPUT_PORT_DATA_TYPE
static void mdlSetOutputPortDataType(SimStruct *S, int port, DTypeId dType)
{
ssSetOutputPortDataType(S, 0, dType);
}
#define MDL_SET_DEFAULT_PORT_DATA_TYPES
static void mdlSetDefaultPortDataTypes(SimStruct *S)
{
ssSetInputPortDataType(S, 0, SS_DOUBLE);
ssSetOutputPortDataType(S, 0, SS_DOUBLE);
}
#define MDL_START /* Change to #undef to remove function */
#if defined(MDL_START)
/* Function: mdlStart =======================================================
* Abstract:
* This function is called once at start of model execution. If you
* have states that should be initialized once, this is the place
* to do it.
*/
static void mdlStart(SimStruct *S)
{
real_T *xD = ssGetDiscStates(S);
lsm_1_Start_wrapper(xD);
}
#endif /* MDL_START */
/* Function: mdlOutputs =======================================================
*
*/
static void mdlOutputs(SimStruct *S, int_T tid)
{
const real_T *u0 = (real_T *) ssGetInputPortRealSignal(S, 0);
real_T *y0 = (real_T *) ssGetOutputPortRealSignal(S, 0);
const real_T *xD = ssGetDiscStates(S);
lsm_1_Outputs_wrapper(u0, y0, xD);
}
#define M
