没有合适的资源?快使用搜索试试~ 我知道了~
温馨提示
试读
7页
隧道中间风井基坑通常在隧道穿越前施工完毕,盾构机穿越风井之后完成风井剩余结构。此方法导致风井基坑开挖深度深,盾构需在较短范围内完成进出洞工序各一次,工期及造价损失严重,风险也比较高。本文介绍了一种风井吊筑法施工工艺:隧道从较浅风井基坑下部快速穿越,从风井基坑底部往下逆筑开挖风口至隧道结构,逆筑期间不予降水。本文还将解决此工法运用中碰到的问题,特别是盾构近距离下穿基坑时的施工参数设定及开挖对已建隧道的变形控制问题。
资源推荐
资源详情
资源评论
第
7
卷第
1
期
2011
年
2
月
地下空间与工程学报
Chinese Joumal of Underground Space and Engineering
Vol. 7
Feb.2011
软土地区隧道区间风井吊筑法施工工艺研究*
杨子松
1
,
2
彭芳乐谭勇张正
2
(1.同济大学地下系,上海
200092;
2.
上海建工(集团)总公司技术中心,上海
200083)
摘
要:隧道中间风井基坑通常在隧道穿越前施工完毕,盾构机穿越风井之后完成风井剩
余结构。此方法导致风井基坑开挖深度深,盾构需在较短范围内完成进出洞工序各一次,工期
及造价损失严重,风险也比较高。本文介绍了一种风井吊筑法施工工艺:隧道从较浅风井基坑
下部快速穿越,从风井基坑底部往下逆筑开挖风口至隧道结构,逆筑期间不予降水。本文还将
解决此工法适用中碰到的问题,特别是盾构近距离下穿基坑时的施工参数设定及开挖对已建
隧道的变形控制问题。
关键词:风井;吊筑法;施工参数;隧道变形
中图分类号:
TU745. 3
文献标识码
:A
文章编号
:1673
-0836(2011
)01
-0099
-07
Analysis of Ventilation Shaft Construction Technology in Soft Soils
with "Hanging and Top-Down Method"
Yang
Zisong
1
,2 ,
Peng
Fangle
1
,
Tan
Yong
1
,
Zhang
Zeng
2
(
1.
Department
0/
Ge
otechnical Engineering, Tongji University , Shanghai 200092 , China;
2. Technical Center
, Shanghai Construction
(Gro
叩)
Ge
neral
Co.
, Shanghai 200083 , China)
Abstract:
Before a
shield'
s arriving, the pit of a
tunnel'
s ventilation shaft must be built , the left structure of
the ventilation shaft will be bui
It after the leave of the shield. This method needs to construct a deep pit, and at the
same time
, the shield must complete an arriving and departure process in a short interval. This situation increases the
construction cost
, period and risk too. In this paper, "Hanging and Top-Down Method" of ventilation shaft construc-
tion technology will be described. Using this method
, the shield passes a more shallow ventilation shaft pit quickly
just close beneath it
, the vents between the tunnel structure and the floor of ventilation shaft pit are constructed later
using a technology similar
to
"top-down method" , and the vent structure hang at the floor of the pit ,
no
dewatering a-
dopted during the construction. This paper will also address efforts at solving the problems the technology encoim-
tered
, especially the construction parameter setting when shield passes the pit just close beneath it and the method
to
control the deformation of tunnel structure.
Keywords:
ventilation shaft; hanging and top-down method; construction parameter; tunnel
defo
口
nation
1
引言
对于长距离隧道,通风设计是非常有必要的。
在盾构法隧道中,盾构工作井可以预留通风通道,
但对于较长盾构施工段,区间内常常需要额外设置
收稿日期
:2010-10-20
(修改稿)
通风设施,区间风井建造问题由此提出。
对于城市地铁隧道,风井建造一般先施工风井
基坑,然后盾构机在风井基坑内部穿越,即需要盾
构机完成"进出洞"工序各一次。基于这个原因,
风井基坑常常作为盾构机作业的始发井或接受井。
作者简介:杨子松(1
980-)
,男,湖北鄂州人,博士研究生,主要从事地下工程施工及科研工作。
E-mail:yangzisong@scgtc.com.cn
基金项目:国家"十一五"科技支撑计划项目
(2006BAJ27B02
)
资源评论
weixin_38529123
- 粉丝: 3
- 资源: 930
上传资源 快速赚钱
- 我的内容管理 展开
- 我的资源 快来上传第一个资源
- 我的收益 登录查看自己的收益
- 我的积分 登录查看自己的积分
- 我的C币 登录后查看C币余额
- 我的收藏
- 我的下载
- 下载帮助
安全验证
文档复制为VIP权益,开通VIP直接复制
信息提交成功