没有合适的资源?快使用搜索试试~ 我知道了~
MIL-PRF-63460F_NOT_1-003.pdf
1.该资源内容由用户上传,如若侵权请联系客服进行举报
2.虚拟产品一经售出概不退款(资源遇到问题,请及时私信上传者)
2.虚拟产品一经售出概不退款(资源遇到问题,请及时私信上传者)
版权申诉
0 下载量 135 浏览量
2023-07-20
10:53:55
上传
评论
收藏 206KB PDF 举报
温馨提示
试读
19页
MIL-PRF-63460F_NOT_1-003.pdf
资源推荐
资源详情
资源评论
` MIL-PRF-63460F
26 March 2017
SUPERSEDING
MIL-PRF-63460E
w/AMENDMENT 4
05 November 2014
PERFORMANCE SPECIFICATION
CLEANER, LUBRICANT, AND PRESERVATIVE
FOR WEAPONS AND WEAPONS SYSTEMS
This specification is approved for use by all Departments and Agencies of the Department of
Defense.
1. SCOPE
1.1 Scope. This specification describes the performance requirements and verification
methods for two types of CLEANER, LUBRICANT, AND PRESERVATIVE (CLP) FOR
WEAPONS AND WEAPONS SYSTEMS. This product is for use in cleaning, lubricating and
short-term (see 6.9.5) preservation of small and large caliber military weapons, operating in the
temperature range of -51 to + 71 °C (-60 to +160 °F). (See 6.1).
1.2 Classification. CLP products are of the following types, as specified (see 6.2).
1.2.1 Types.
Type A - Traditional, (i.e., non-biobased)
Type B - Biobased
1.2.2 Biobased. Biobased CLP is defined as CLP that is derived from plants and other
renewable agricultural, marine, and forestry materials in a formulation yielding a percentage of
biobased content meeting the requirement of 3.2.6.
1.3 Identification. This lubricant is identified by Military Symbol CLP and North Atlantic
Treaty Organization (NATO) Code Number S-758.
AMSC/NA FSC 9150
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
Comments, suggestions or questions on this document should be addressed to: Commander, U S Army
Armament Research, Development, and Engineering Center (ARDEC), ATTN: RDAR-EIQ-SA,
Picatinny
Arsenal, NJ 07806-5000, or emailed to: usarmy.picatinny.ardec.list.ardec-stdzn-branch@mail.mil.
Since contact information can change, you may want to verify the currency of this address using the
ASSIST Online database at https://assist.dla.mil .
INCH-POUND
Source: https://assist.dla.mil -- Downloaded: 2023-03-06T13:30Z
Check the source to verify that this is the current version before use.
MIL-PRF-63460F
2
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3 or 4 of
this specification. This section does not include documents cited in other sections of this
specification or recommended for additional information or as examples. While every effort has
been made to ensure the completeness of this list, document users are cautioned that they must
meet all specified requirements of documents cited in sections 3 and 4 of this specification,
whether or not they are listed.
2.2 Government documents.
2.2.1 Specifications, standards, and handbooks. The following specifications, standards, and
handbooks form a part of this document to the extent specified herein. Unless otherwise
specified, the issues of these documents are those cited in the solicitation or contract.
FEDERAL SPECIFICATIONS
O-E-751 Ether, Petroleum; Technical-Grade
O-M-232 Methanol (Methyl Alcohol)
FEDERAL STANDARDS
FED-STD-791 Lubricants, Liquid Fuels, and Related Products, Testing Method of
COMMERCIAL ITEM DESCRIPTIONS
A-A-51126 Anodes, Cadmium
DEPARTMENT OF DEFENSE SPECIFICATIONS
MIL-PRF-680 Degreasing Solvent.
MIL-DTL-18001 Anodes, Sacrificial Zinc Alloy
MIL-DTL-51408 Paper, Chemical Agent Detector, VGH, ABC-M8
MIL-DTL-51518 Paper, Chemical Agent Detector: M9 (SR119 DYE).
(Copies of these documents are available online at http://quicksearch.dla.mil/ )
2.2.2 Other Government documents, drawings, and publications. The following other
Government documents, drawings and publications form a part of this document to the extent
specified herein. Unless otherwise specified, the issues of these documents are those cited in the
solicitation or contract.
Source: https://assist.dla.mil -- Downloaded: 2023-03-06T13:30Z
Check the source to verify that this is the current version before use.
MIL-PRF-63460F
3
US ARMY DEVELOPMENTAL TEST COMMAND
TOP 3-2-045 SMALL ARMS - Hand and Shoulder Weapons and Machineguns
(Test Operating Procedures (TOPs) may be ordered online at
http://www.dtc.army.mil/publications/topsindex.aspx/ , or from the US Army DTC, ATTN:
Publications, 314 Longs Corner Road, Aberdeen Proving Ground, MD 21005-5005.)
ARMY TECHNICAL MANUAL
TM 9-1005-201-10 Technical Manual, Machine Gun, 5.56MM, M249
(This Technical Manual (TM) may be viewed and printed at
https://www.logsa.army.mil/etms/online.cfm )
2.3 Non-Government publications. The following documents form a part of this document to
the extent specified herein. Unless otherwise specified, the issues of these documents are those
cited in the solicitation or contract.
ASTM INTERNATIONAL
ASTM A109/A109M Steel, Strip, Carbon, (0.25 Maximum Percent), Cold-Rolled
ASTM B16/B16M Rod, Brass, Free-Cutting, Bar and Shapes for Use in Screw
Machines
ASTM B117 Operating Salt Spray (Fog) Apparatus
ASTM B152/B152M Copper Sheet, Strip, Plate and Rolled Bar
ASTM B209 Aluminum and Aluminum-Alloy Sheet and Plate
ASTM D56 Flash Point by Tag Closed Cup Tester
ASTM D92 Flash and Fire Points by Cleveland Open Cup Tester
ASTM D97 Pour Point of Petroleum Products
ASTM D445 Kinematic Viscosity of Transparent and Opaque Liquids (and the
Calculation of Dynamic Viscosity)
ASTM D972 Evaporation Loss of Lubricating Greases and Oils
ASTM D1748 Rust Protection by Metal Preservatives in the Humidity Cabinet
ASTM D4057 Manual Sampling of Petroleum and Petroleum Products
ASTM D4172 Wear Preventive Characteristics of Lubricating Fluid (Four-Ball
Method)
ASTM D4177 Automatic Sampling of Petroleum and Petroleum Products
ASTM D2625 Test Method for Endurance (Wear) Life and Load-Carrying
Capacity of Solid Film Lubricants (Falex Pin and Vee Method)
ASTM D6866 Standard Test Methods for Determining the Biobased Content of
Solid, Liquid, and Gaseous Samples Using Radiocarbon Analysis
(Copies of these documents may be ordered at www.astm.org/ or from the ASTM International,
100 Barr Harbor Drive, West Conshohocken, PA 19428-2959)
Source: https://assist.dla.mil -- Downloaded: 2023-03-06T13:30Z
Check the source to verify that this is the current version before use.
MIL-PRF-63460F
4
SOCIETY OF AUTOMOTIVE ENGINEERS (SAE)
AMS 4376 Plate, Magnesium Alloy 3.0Al – 1.0Zn – 0.20Mn (AZ31B-H26)
Cold Rolled and Partially Annealed
(Copies of this document may be ordered on line at www.sae.org/ or from the SAE World
Headquarters, Customer Service, 400 Commonwealth Drive, Warrendale, PA 15096-0001)
2.4 Order of precedence. Unless otherwise noted herein or in the contract, in the event of a
conflict between the text of this document and the references cited herein, the text of this
document takes precedence. Nothing in this document, however, supersedes applicable laws and
regulations unless a specific exemption has been obtained.
3. REQUIREMENTS
3.1 Qualification. CLP furnished under this specification shall be products authorized by the
Qualifying Activity for listing on the applicable Qualified Products List (QPL) before contract
award (see 4.1.1, 6.3).
3.1.1 Qualification of Types.
a. Type A CLP shall meet all of the requirements of this specification, with the exception
of the biobased content requirement of 3.2.6.
b. Type B CLP shall meet all of the requirements of this specification.
3.1.2 Conformance inspection. When specified, a sample of CLP shall be subjected to a
qualification conformance inspection (See 4.1.2 and TABLE III).
3.2 Support and ownership requirements.
3.2.1 Graphite. CLP shall contain no graphite or powdered metals.
3.2.2 Ozone depleting substances (ODS). CLP shall contain no ODS.
3.2.3 Toxicity and hazardous materials. CLP shall have no adverse effect on the health of
personnel when used for its intended purpose (see 6.1, 6.4).
3.2.4 Color and appearance. CLP shall be uniform in color and appearance when examined
in reflected light, and shall have no visible residue after shaking.
3.2.5 Physical properties. CLP shall conform to properties specified in TABLE I.
Source: https://assist.dla.mil -- Downloaded: 2023-03-06T13:30Z
Check the source to verify that this is the current version before use.
剩余18页未读,继续阅读
资源评论
phyit
- 粉丝: 7648
- 资源: 2803
上传资源 快速赚钱
- 我的内容管理 展开
- 我的资源 快来上传第一个资源
- 我的收益 登录查看自己的收益
- 我的积分 登录查看自己的积分
- 我的C币 登录后查看C币余额
- 我的收藏
- 我的下载
- 下载帮助
安全验证
文档复制为VIP权益,开通VIP直接复制
信息提交成功