76
1 2 3
The mechanism of the Patravi EvoTec DayDate is
based on the innovative CFB A1000 manufacturer
calibre with a peripheral rotor. Measuring 43.75 ×
44.5 mm, the cushion-shaped case of the Patravi
EvoTec DayDate has generous measurements.
It includes a clearly set-up dial on which there is
room for the day indicator and a big date, in
addition to the small seconds.
Your watch
CFB A1001Automatic movement
6.3 mmDepth of the movement
32 mmDiameter of the movement
33Number of jewel bearings
Water resistance
(see the chapter on "Water resistance")
Technical Data
Crown
Position 1:
Position 2:
Position 3:
Winding
Set date / day of the week
Set time
Legend
The movement is wound by the motion of the
wrist when worn. When not worn, the watch stops
after approximately 55 hours and has to be wound
manually.
Start the watch
Rotating the crown in the
counter clockwise direction
will automatically release it
to position 1.
Manually wind the move-
ment by rotating the crown
at least 30 times in the
clockwise direction.
In order for the date to properly move at midnight,
the hour hand must intentionally be set to a.m. or
p.m. based on the current time.
Set time
Pull the crown until it is in
position 3. The second hand
does not move.
Small seconds
Big date
Day of the week
Rotate the crown clockwise
until the date changes. Then
deliberately set the current
time either a.m. or p.m.
Push the crown back into
position 1. The second hand
is back in motion.
3
11
2 2
50 m (5 atm)
Patravi evotec daydate
EN EN
