AT91SAM9261-EK.rar_9261_AT91SAM9261_arm interrupt_project_timer

######################################################################## # # AT91SAM9261_leds_blink.eww # # $Revision: 1.1 $ # ######################################################################## DESCRIPTION =========== This example project shows how to use the IAR Embedded Workbench for ARM to develop code for the Atmel AT91SAM9261 evaluation boards. It shows basic use of parallel I/O, timer and the interrupt controller. It starts by showing different patterns on the LED's separated by half second. COMPATIBILITY ============= The project is compatible with the AT91SAM9261-EK board. GETTING STARTED =============== Start the IAR Embedded Workbench for ARM. Select File->Open->Workspace... Open the workspace file JTAG ==== Build the project. Select Project->Options... In the category field select C-SPY. In the setup tab set driver to Macraigor, J-Link or RDI depending on your JTAG hardware. Start the debugger. The board may require special setup in a C-SPY macro before the code is downloaded by the debugger.