没有合适的资源?快使用搜索试试~ 我知道了~
搬运机械手的PLC控制系统设计论文.docx
1.该资源内容由用户上传,如若侵权请联系客服进行举报
2.虚拟产品一经售出概不退款(资源遇到问题,请及时私信上传者)
2.虚拟产品一经售出概不退款(资源遇到问题,请及时私信上传者)
版权申诉
0 下载量 44 浏览量
2023-09-13
14:27:51
上传
评论
收藏 419KB DOCX 举报
温馨提示
试读
82页
搬运机械手的PLC控制系统设计论文.docx
资源推荐
资源详情
资源评论
搬运机械手的 PLC 控制系统设计
摘 要
随着工业自动化的普及和发展,控制器的需求量逐年增大,搬运机械手的应
用也逐渐普及。其主要在汽车,电子,机械加工、食品、医药等领域的生产流水
线或货物装卸调运,可以更好地节约能源和提高运输设备或产品的效率,以降低其
他搬运方式的限制和不足,满足现代经济发展的要求。
首先研究机械手组成结构、工作原理和控制要求。机械手主要由两个步进电
机来实现机械手的左移右移和上升下降运动,一个交流电动机控制搬运机械手的
正反转运动。搬运机械手的动作转换主要由设置在各个不同部位的行程开关产生
的通断信号传输到 PLC 中进行控制,从而实现本机械手的精确定位。其动作过程
包括:下降、夹紧、上升、正转、右移、下降、放松、上升、左移、逆转;其操
作方式包括:回原点、手动、单周期、连续四种方式来满足生产中的各种操作要
求。其次确定了机械手运动形式,设计了机械手主要的组成机构,对搬运机械手
运动控制进行了总体方案设计。提出了机械手的 PLC 控制系统,并选取了合适的 PLC、
扩展模块型号,绘制了搬运机械手输入输出接线图、电气接线图。
根据机械手的工作流程制定了可编程序控制器的控制方案,设计了机械手工
作时的梯形图,在实验室进行了程序的调试、运行。
关键词:搬运机械手,可编程逻辑控制器,步进电机
Handling Manipulator's PLC Control System Design
ABSTRACT
With the popularization and development of industrial automation, the controller
demand is increasing year by year, and the handling robot applications are becoming
more common. Its main in the automotive, electronics, machining, food, medicine and
other areas of production lines or cargo transported, can be better to save energy and to
improve the efficiency of the transport equipment or products, in order to reduce the
limitations and shortcomings of the other handling methods, meet modern the
requirements of economic development.
First, we study the robot structure, working principle and control requirements.
Manipulator by two stepper motors to the robot's left right and up and down movement,
an AC motor control handling robot reversing movement. Handling robot action
conversion set in different parts of the trip switch off signals transmitted to the PLC
control, in order to achieve the precise positioning of the robot. Its course of action,
including: drop, clamping, rise, turning, moves right, drop, relax, rise, moves left,
reverse; its mode of operation including: homing, manual, single cycle, continuous four
ways to meet the production a variety of operating requirements. Second, determine the
form of movement of the robot, design the robot main constituent bodies, and design the
handling robot motion control of the overall program. Put forward the manipulator of
PLC control system, and select the appropriate PLC expansion module model, draw a
handling robot input and output wiring diagram, electrical wiring diagram.
Based on the workflow of the robot control program of the programmable logic
controller, we design a robot work ladder, and debug run in the laboratory.
Key words:Handling manipulator, programmable logic controller, stepper motor
目 录
摘 要 ...............................................................I
ABSTRACT ..........................................................II
第 1 章绪论 ...........................................................1
1.1 题目的背景和意义 ................................................1
1.2 题目研究现状概述 ................................................1
1.3 本论文研究内容 ..................................................3
第 2 章搬运机械手工作原理 .............................................5
2.1 搬运机械手的组成 ................................................5
2.2 搬运机械手的动作流程 ............................................6
2.3 搬运机械手结构与驱动 ............................................7
2.3.1 搬运机械手结构 ..............................................8
2.3.2 搬运机械手驱动 ..............................................9
第 3 章 搬运机械手整体方案设计 .......................................11
3.1 搬运机械手执行机构设计 .........................................12
3.1.1 手爪结构设计 ...............................................12
3.1.2 臂部结构设计 ...............................................12
3.1.3 底盘结构设计 ...............................................13
3.1.4 整体结构设计 ...............................................14
3.2 搬运机械手驱动系统设计 .........................................14
3.2.1 步进电机的特点 .............................................15
3.2.2 步进电机及驱动器的选取 .....................................16
3.2.3 步进电机驱动器接线图 .......................................16
3.3 搬运机械手控制系统设计 .........................................17
3.3.1 PLC 的工作过程 .............................................17
3.3.2 PLC 的工作方式 .............................................18
3.3.3 PLC 的选型 .................................................19
3.3.4 I/0 点分配 .................................................21
3.4 PLC 控制系统硬件 ...............................................23
3.4.1 主电路接线图 ...............................................23
3.4.2 PLC I/O 接线图 .............................................24
第 4 章搬运机械手软件设计 ............................................25
4.1 PLC 编程软件 STEP7-MICRO/WIN32 简介...............................25
4.2 梯形图的总体设计 ...............................................26
4.3 PLC 程序模块介绍 ...............................................27
4.3.1 公用部分程序 ...............................................27
4.3.2 自动操作程序 ...............................................29
4.3.3 手动操作程序 ...............................................30
4.3.4 回原点程序 .................................................30
4.4 控制步进电机脉冲产生子程序 .....................................30
4.5 对旋转编码盘计数子程序和中断程序 ...............................31
4.6 程序调试 .......................................................33
第 5 章 结 论 .......................................................36
参考文献 ............................................................37
谢 辞 ..............................................................38
第一章绪论
1.1 题目的背景和意义
机械手臂(robotic arm)是具有模仿人类手臂功能并可完成各种作业的自动
控制设备,这种机器人系统有多关节连结并节允许在平面或三度空间进行运动或
使用线性位移移动。构造上由机械主体、控制器、伺服机构和感应器所组成,并
由程式根据作业需求设定其一定的指定动作。机器人的运作由电动机驱动移动一
只手臂,张开或关闭一个夹子的动作,并精确的回馈至可编程逻辑的控制器
剩余81页未读,继续阅读
资源评论
南抖北快东卫
- 粉丝: 70
- 资源: 5584
上传资源 快速赚钱
- 我的内容管理 展开
- 我的资源 快来上传第一个资源
- 我的收益 登录查看自己的收益
- 我的积分 登录查看自己的积分
- 我的C币 登录后查看C币余额
- 我的收藏
- 我的下载
- 下载帮助
安全验证
文档复制为VIP权益,开通VIP直接复制
信息提交成功