没有合适的资源?快使用搜索试试~ 我知道了~
资源推荐
资源详情
资源评论
JEDEC
STANDARD
Standard Manufacturer’s
Identification Code
JEP106BF.01
(Revision of JEP106BE, January 2022)
OCTOBER 2022
JEDEC SOLID STATE TECHNOLOGY ASSOCIATION
Downloaded by 65 56 ([email protected]) on Nov 13, 2022, 11:57 pm PST
JEDEC
NOTICE
JEDEC standards and publications contain material that has been prepared reviewed and
approved through the JEDEC Board of Directors level and subsequently reviewed and approved
by the JEDEC legal counsel.
JEDEC standards and publications are designed to serve the public interest through eliminating
misunderstandings between manufacturers and purchasers facilitating interchangeability and
improvement of products and assisting the purchaser in selecting and obtaining with minimum
delay the proper product for use by those other than JEDEC members whether the standard is to
be used either domestically or internationally.
JEDEC standards and publications are adopted without regard to whether or not their adoption
may involve patents or articles materials or processes. By such action JEDEC does not assume
any liability to any patent owner nor does it assume any obligation whatever to parties adopting
the JEDEC standards or publications.
The information included in JEDEC standards and publications represents a sound approach to
product specification and application principally from the solid state device manufacturer
viewpoint. Within the JEDEC organization there are procedures whereby a JEDEC standard or
publication may be further processed and ultimately become an ANSI standard.
No claims to be in conformance with this standard may be made unless all requirements stated in
the standard are met.
Inquiries comments and suggestions relative to the content of this JEDEC standard or publication
should be addressed to JEDEC at the address below or www.jedec.org under Standards and
Documents for further information.
Published by
©JEDEC Solid State Technology Association 2022
3103 10th Street North
Suite 240 South
Arlington VA 22201-2107
This document may be downloaded free of charge; however, JEDEC retains the
copyright on this material. By downloading this file, the individual agrees not to
charge for or resell the resulting material.
PRICE: see www.jedec.org
Printed in the U.S.A.
All rights reserved
Downloaded by 65 56 ([email protected]) on Nov 13, 2022, 11:57 pm PST
JEDEC
PLEASE!
DON’T VIOLATE
THE
LAW!
This document is copyrighted by JEDEC and may not be
reproduced without permission.
For information contact:
JEDEC Solid State Technology Association
3103 10th Street North
Suite 240 South
Arlington VA 22201-2107
or call (703) 624-9230
Downloaded by 65 56 ([email protected]) on Nov 13, 2022, 11:57 pm PST
JEDEC
Downloaded by 65 56 ([email protected]) on Nov 13, 2022, 11:57 pm PST
JEDEC
JEDEC Publication No. 106BF.01
Page 1
STANDARD MANUFACTURER’S IDENTIFICATION CODE
(From JEDEC Board Ballot JCB-94-02 formulated under the cognizance of JC-42.3 Subcommittee on
RAM Memories).
1 Intent
The intent of this identification code is that it may be used whenever a digital field is required e.g.
hardware software documentation etc.
2 Scope
The manufacturer’s identification code is defined by one or more eight (8) bit fields each consisting of
seven (7) data bits plus one (1) odd parity bit. It is a single field limiting the possible number of vendors
to 126. To expand the maximum number of identification codes a continuation scheme has been defined.
The code 7F as shown in Table 1 indicates that the manufacturer’s code is beyond the limit of this field
and the next sequential manufacturer’s identification field is used. Multiple continuation fields are
permitted and when used shall comprise of the identification code.
3 Manufactures Identification Codes
The manufacturer’s identification code as shown in Table 1 is assigned maintained and updated by the
JEDEC office. The identification code list is not a fixed listing. Any company can be added to the list by
making a request to the JEDEC office at http://www.jedec.org/standards-documents/id-codes-order-form
or by calling (703) 907-7540. Updates to the list will be made periodically and Table 1 will be modified
accordingly.
The present list is complete as of October 31, 2022.
Downloaded by 65 56 ([email protected]) on Nov 13, 2022, 11:57 pm PST
JEDEC
剩余51页未读,继续阅读
资源评论
- weixin_459158172023-03-15资源有一定的参考价值,与资源描述一致,很实用,能够借鉴的部分挺多的,值得下载。
- PIU9512023-07-06资源很受用,资源主总结的很全面,内容与描述一致,解决了我当下的问题。
std86021
- 粉丝: 93
- 资源: 2691
上传资源 快速赚钱
- 我的内容管理 展开
- 我的资源 快来上传第一个资源
- 我的收益 登录查看自己的收益
- 我的积分 登录查看自己的积分
- 我的C币 登录后查看C币余额
- 我的收藏
- 我的下载
- 下载帮助
安全验证
文档复制为VIP权益,开通VIP直接复制
信息提交成功