毕业设计管理系统, 采用B/S模式

File: APPNOTE.TXT - .ZIP File Format Specification Version: 6.3.2 Revised: September 28, 2007 Copyright (c) 1989 - 2007 PKWARE Inc., All Rights Reserved. The use of certain technological aspects disclosed in the current APPNOTE is available pursuant to the below section entitled "Incorporating PKWARE Proprietary Technology into Your Product". I. Purpose ---------- This specification is intended to define a cross-platform, interoperable file storage and transfer format. Since its first publication in 1989, PKWARE has remained committed to ensuring the interoperability of the .ZIP file format through publication and maintenance of this specification. We trust that all .ZIP compatible vendors and application developers that have adopted and benefited from this format will share and support this commitment to interoperability. II. Contacting PKWARE --------------------- PKWARE, Inc. 648 N. Plankinton Avenue, Suite 220 Milwaukee, WI 53203 +1-414-289-9788 +1-414-289-9789 FAX zipformat@pkware.com III. Disclaimer --------------- Although PKWARE will attempt to supply current and accurate information relating to its file formats, algorithms, and the subject programs, the possibility of error or omission cannot be eliminated. PKWARE therefore expressly disclaims any warranty that the information contained in the associated materials relating to the subject programs and/or the format of the files created or accessed by the subject programs and/or the algorithms used by the subject programs, or any other matter, is current, correct or accurate as delivered. Any risk of damage due to any possible inaccurate information is assumed by the user of the information. Furthermore, the information relating to the subject programs and/or the file formats created or accessed by the subject programs and/or the algorithms used by the subject programs is subject to change without notice. If the version of this file is marked as a NOTIFICATION OF CHANGE, the content defines an Early Feature Specification (EFS) change to the .ZIP file format that may be subject to modification prior to publication of the Final Feature Specification (FFS). This document may also contain information on Planned Feature Specifications (PFS) defining recognized future extensions. IV. Change Log -------------- Version Change Description Date ------- ------------------ ---------- 5.2 -Single Password Symmetric Encryption 06/02/2003 storage 6.1.0 -Smartcard compatibility 01/20/2004 -Documentation on certificate storage 6.2.0 -Introduction of Central Directory 04/26/2004 Encryption for encrypting metadata -Added OS/X to Version Made By values 6.2.1 -Added Extra Field placeholder for 04/01/2005 POSZIP using ID 0x4690 -Clarified size field on "zip64 end of central directory record" 6.2.2 -Documented Final Feature Specification 01/06/2006 for Strong Encryption -Clarifications and typographical corrections 6.3.0 -Added tape positioning storage 09/29/2006 parameters -Expanded list of supported hash algorithms -Expanded list of supported compression algorithms -Expanded list of supported encryption algorithms -Added option for Unicode filename storage -Clarifications for consistent use of Data Descriptor records -Added additional "Extra Field" definitions 6.3.1 -Corrected standard hash values for 04/11/2007 SHA-256/384/512 6.3.2 -Added compression method 97 09/28/2007 -Documented InfoZIP "Extra Field" values for UTF-8 file name and file comment storage V. General Format of a .ZIP file -------------------------------- Files stored in arbitrary order. Large .ZIP files can span multiple volumes or be split into user-defined segment sizes. All values are stored in little-endian byte order unless otherwise specified. Overall .ZIP file format: [local file header 1] [file data 1] [data descriptor 1] . . . [local file header n] [file data n] [data descriptor n] [archive decryption header] [archive extra data record] [central directory] [zip64 end of central directory record] [zip64 end of central directory locator] [end of central directory record] A. Local file header: local file header signature 4 bytes (0x04034b50) version needed to extract 2 bytes general purpose bit flag 2 bytes compression method 2 bytes last mod file time 2 bytes last mod file date 2 bytes crc-32 4 bytes compressed size 4 bytes uncompressed size 4 bytes file name length 2 bytes extra field length 2 bytes file name (variable size) extra field (variable size) B. File data Immediately following the local header for a file is the compressed or stored data for the file. The series of [local file header][file data][data descriptor] repeats for each file in the .ZIP archive. C. Data descriptor: crc-32 4 bytes compressed size 4 bytes uncompressed size 4 bytes This descriptor exists only if bit 3 of the general purpose bit flag is set (see below). It is byte aligned and immediately follows the last byte of compressed data. This descriptor is used only when it was not possible to seek in the output .ZIP file, e.g., when the output .ZIP file was standard output or a non-seekable device. For ZIP64(tm) format archives, the compressed and uncompressed sizes are 8 bytes each. When compressing files, compressed and uncompressed sizes should be stored in ZIP64 format (as 8 byte values) when a files size exceeds 0xFFFFFFFF. However ZIP64 format may be used regardless of the size of a file. When extracting, if the zip64 extended information extra field is present for the file the compressed and uncompressed sizes will be 8 byte values. Although not originally assigned a signature, the value 0x08074b50 has commonly been adopted as a signature value for the data descriptor record. Implementers should be aware that ZIP files may be encountered with or without this signature marking data descriptors and should account for either case when reading ZIP files to ensure compatibility. When writing ZIP files, it is recommended to include the signature value marking the data descriptor record. When the signature is used, the fields currently defined for the data descriptor record will immediately follow the signature. An extensible data descriptor will be released in a future version of this APPNOTE. This new record is intended to resolve conflicts with the use of this record going forward, and to provide better support for streamed file processing. When the Central Directory Encryption method is used, the data descriptor record is not required, but may be used. If present, and bit 3 of the general purpose bit field is set to indicate its presence, the values in fields of the data descriptor record should be set to binary zeros. D. Archive decryption header: The Archive