################################################################################
## Behavioral model Level 1 for SPICE compatible simulators
################################################################################
--------------------------------------------------------------------------------
1. Changelog
--------------------------------------------------------------------------------
VER | BY | DATE | OBSERVATION
--------------------------------------------------------------------------------
1.0 | Infineon Technologies AG | 2020-11-30 | created (*1)
--------------------------------------------------------------------------------
1.1 | Infineon Technologies AG | 2021-10-01 | updated (*1) added: IKQ75N120CH3
IKQ50N120CH3
IKQ40N120CH3
IKY75N120CH3
IKY50N120CH3
IKY40N120CH3
(*1)
The Level 1 model is based on a behavioral description. The calibration is
done with respect to the latest datasheet content. The transient calibration
procedure is based on the "Dynamic test circuit", which is stated in the
latest datasheet using the information of parasitic elements and nominal
conditions given in the table "Switching Characteristic, Inductive Load".
The usage of the compact models is restricted to a temperature range between
25°C and the maximum allowed junction temperature, which is stated in the
corresponding data sheet.
The static temperature of the model can be set by using the SPICE command
.TEMP in the simulator interface.
--------------------------------------------------------------------------------
2. How to make the model run
--------------------------------------------------------------------------------
- include the model as shown in the latest version of the
"AN_2020_17_Simulation models of Infineon's IGBTs and power silicon diodes
in discrete packages_v1_0"
--------------------------------------------------------------------------------
3. Supported platform
--------------------------------------------------------------------------------
This model has been successfully tested with the following software:
- SIMetrix 8.20
- Orcad PSpice 17.2-2016
- LTspice XVII
- TINA 12.0.30.147
--------------------------------------------------------------------------------
4. Structure of the delivery package
--------------------------------------------------------------------------------
The delivery package contains the following:
- Disclaimer.pdf : Infineons model terms of use
- /model/IGBT_1200V_HighSpeed3_L1.lib : model lib file
- /model/IGBT_Symbols.sxslb : symbol lib file
- /model/testbenches : netlists to simulate device
characteristics
- /model/results : graphs to represent results of the
testbenches
--------------------------------------------------------------------------------
5. Infineon contact and support
--------------------------------------------------------------------------------
support@infineon.com
--------------------------------------------------------------------------------
6. Disclaimer
--------------------------------------------------------------------------------
INFINEONS MODEL TERMS OF USE
BY DOWNLOADING AND/OR USING THIS INFINEON MODEL (MODEL), THE USER
(INCLUDING YOU) AGREES TO BE BOUND BY THE TERMS OF USE HERE STATED. IF USER
DOES NOT AGREE TO ALL TERMS OF USE HERE STATED, USER SHALL NOT DOWNLOAD,
USE OR COPY THE MODEL BUT IMMEDIATELY DELETE IT (TO THE EXTENT THAT IT
WAS DOWNLOADED ALREADY).
1. SCOPE OF USE
1.1 Any use of this Model provided by Infineon Technologies AG is subject
to these Terms of Use.
1.2 This Model, provided by Infineon, does not fully represent all of the
specifications and operating characteristics of the product to which
this Model relates.
1.3 This Model only describes the characteristics of a typical product.
In all cases, the current data sheet information for a given product
is the final design guideline and the only actual performance
specification. Although this Model can be a useful tool to evaluate
the product performance, it cannot simulate the exact product performance
under all conditions and it is also not intended to replace
bread-boarding for final verification.
2. IMPORTANT NOTICE
2.1 Infineon Technologies AG (Infineon) is not and cannot be aware of the
specific application of the Infineons Model by User. However, Model may
from time to time be used by User in potentially harmful and/or life-
endangering applications such as traffic, logistic, medical, nuclear
or military applications or in other applications where failure of the
Model may predictably cause damage to persons life or health or to
property (hereinafter "Critical Applications").
2.2 User acknowledges that Infineon has not specifically designed or
qualified the Model for Critical Applications that the Model may contain
errors and bugs and that User is required to qualify the Model for
Critical Applications pursuant to the applicable local quality, safety
and legal requirements before permitting or giving access to any such use.
3. CONFIDENTIAL INFORMATION
User shall treat ideas, concepts and information incorporated in the
Model, the documentation and the content of this Terms of Use (together
hereinafter "Confidential Information") confidential, not disclose it to
any third party unless otherwise agreed in writing between User and
Infineon, not use it for any other purposes than using the Model for
simulation and testing purposes only.
4. WARRANTY
4.1 User acknowledges that the Model is provided by Infineon under this Terms
of Use is provided free of charge and "AS IS" without any warranty or
liability of any kind and Infineon hereby expressly disclaims any
warranties or representations, whether express, implied, statutory or
otherwise, including but not limited to warranties of workmanship,
merchantability, fitness for a particular purpose, defects in the
Model, or non-infringement of third parties intellectual property rights.
4.2 Infineon reserves the right to make corrections, deletions, modifications,
enhancements, improvements and other changes to the Model at any time
or to move or discontinue any Model without notice.
5. LIABILITY
5.1 Nothing in this Terms of Use shall limit or exclude Infineon's liability
under mandatory liability laws, for injuries to life, body or health,
for fraudulent concealment of defects in the software, or in cases
of Infineon's intentional misconduct or gross negligence.
5.2 Without prejudice to Sections 5.1, in cases of Infineon's slight
negligent breach of obligations that restrict essential rights or duties
arising from the nature of this Terms of Use in a way that there is a
risk of non-achievement of the purpose of this Terms of Use or of an
obligation whose observance User regularly may trust in and whereas
compliance with only makes proper execution of this Terms of Use
possible, Infineon's liability shall be limited to the typically,
foreseeable damage.
5.3 Without prejudice to Sections 8.1 and 8.2, Infineon's liability under
this Agreement shall be excluded in all other cases.
6. EXPORT REGULATIONS
The User shall comply with all applicable national and international
laws and regulations, in particular the applicable export control
regulations and sanction programs. The User
没有合适的资源?快使用搜索试试~ 我知道了~
LTspice双脉冲测试仿真模型以及第三方软件模型导入
共22个文件
net:6个
png:6个
raw:2个
需积分: 5 6 下载量 188 浏览量
2024-04-02
11:06:20
上传
评论
收藏 826KB ZIP 举报
温馨提示
LTspice双脉冲测试仿真模型以及第三方软件模型导入,包括怎么更改相关的仿真参数。可以指直接使用
资源推荐
资源详情
资源评论
收起资源包目录
双脉冲测试.zip (22个子文件)
DPT
操作说明.docx 394KB
2-Level DPT.raw 341KB
2-Level DPT.asc 5KB
2-Level DPT.plt 622B
2-Level DPT.log 2KB
2-Level DPT.op.raw 3KB
Infineon-IGBT_1200V_HighSpeed3-SPICE-L1-v01_01-EN
Disclaimer.pdf 128KB
model
IGBT_Symbols.sxslb 10KB
IGBT_1200V_HighSpeed3_L1.lib 57KB
testbenches
DiodeCharacteristic.net 506B
SwitchingCharacteristic.net 1KB
CapacitanceCharacteristic.net 823B
TransferCharacteristic.net 521B
GateChargeCharacteristic.net 649B
OutputCharacteristic.net 553B
results
TransferCharacteristic_IKW40N120H3_L1.png 14KB
GateChargeCharacteristic_IKW40N120H3_L1.png 15KB
DiodeCharacteristic_IKW40N120H3_L1.png 14KB
CapacitanceCharacteristic_IKW40N120H3_L1.png 15KB
OutputCharacteristic_IKW40N120H3_L1.png 20KB
SwitchingCharacteristic_IKW40N120H3_L1.png 18KB
readme.txt 9KB
共 22 条
- 1
资源评论
pingan12138
- 粉丝: 5
- 资源: 2
上传资源 快速赚钱
- 我的内容管理 展开
- 我的资源 快来上传第一个资源
- 我的收益 登录查看自己的收益
- 我的积分 登录查看自己的积分
- 我的C币 登录后查看C币余额
- 我的收藏
- 我的下载
- 下载帮助
安全验证
文档复制为VIP权益,开通VIP直接复制
信息提交成功