TMS320C6416 烧写程序及工具

Readme.txt for the BlinkDSK6416 example program ----------------------------------------------- To build and burn the BlinkDSK6416 example program into the Flash Memory of the DSK6416 (assumes CCS v2.2 is installed): 1) The project file assumes that CCS resides in directory C:\ti\ 2) Copy the contents of this directory to create a working copy of the sources that you can modify. 3) Run CCS and open the project file "BlinkDSK6416.pjt". If you installed Code Composer Studio in a directory other than C:\ti\, then you will have to provide paths to the runtime library: CCS v2.2 -------- rts6400.lib ( usually in C:\ti\c6000\cgtools\lib\ ) 4) Build the project. This should create the BlinkDSK6416.out file. 5) In a DOS window, change to the project directory and run the hex conversion utility: > hex6x BlinkDSK6416_ahex.cmd This runs the hex conversion utility (hex6x.exe) with the options stated in the command file, BlinkDSK6416_ahex.cmd. The hex conversion utility outputs a hex file, BlinkDSK6416.hex, which is the downloadable code. NOTE: See the FlashBurn Application docs and Help for how you can have FlashBurn create the .hex file by entering "BlinkDSK6416_ahex.cmd" into the Conversion Command field of a FlashBurn .cdd document. 6) Now use the FlashBurn application to program the on-board flash memory. See the help files and readme for the FlashBurn application for details. 7) After using the FlashBurn application to burn-in the FlashBlink program, you can run the BlinkDSK6416 program as follows: - Close the FlashBurn and CCS applications - Remove and reapply power to the board You will see the LEDs blinking in sequence.