ECR6600 SDK 开发指南
以上所有信息归北京奕斯伟计算技术股份有限公司所有，未经许可，严禁外传。 1
目 录
1. 概述....................................................................................................................... 3
2. 开发环境............................................................................................................... 3
2.1 硬件环境 .....................................................................................................3
2.1.1 Raspberry PI 4 model B......................................................... 3
2.1.2 ECR6600 开发板 ......................................................................... 4
2.1.3 设置启动模式.................................................................................. 5
2.1.4 搭建硬件环境.................................................................................. 6
2.2 软件环境 .....................................................................................................6
2.3 搭建树莓派环境 .........................................................................................7
2.3.1 下载镜像文件.................................................................................. 7
2.3.2 格式化 SD 卡...................................................................................7
2.3.3 烧录树莓派系统.............................................................................. 8
2.3.4 配置 SSH.........................................................................................9
2.3.5 更换国内镜像源........................................................................... 11
2.3.6 安装并设置 samba......................................................................12
2.3.7 安装 Linux 5.10.y 内核 ............................................................13
2.3.8 关闭 Wi-Fi 相关加载配置 .......................................................... 14
2.3.9 禁止 wpa 自动启动 .....................................................................14
2.3.10 配置 SDIO 枚举 .........................................................................14
2.3.11 修改 wlan0 的 MAC 地址 ...................................................... 15
2.3.12 启动 wpa 和 wpa_cli...............................................................15
3. 驱动介绍与编译................................................................................................ 15
3.1 驱动目录结构 ..........................................................................................15
3.2 驱动关键 Makefile 和配置文件 ........................................................... 16
3.3 驱动初始化及关键函数 ..........................................................................16
3.4 host 驱动编译 .........................................................................................17
3.5 host 驱动加载 .........................................................................................18
4. 固件加载和日志管理........................................................................................ 18
4.1 设置 USB 驱动加载 ............................................................................... 18
4.2 系统日志管理 ..........................................................................................20
4.2.1 Host 日志管理 ............................................................................. 20
4.2.2 Slave 日志管理 ............................................................................21
