Product Specification
4 /30
LC190WH1
Ver. 0.1
CN1
LVDS
port #1
Power circuit
block
+5V
VLCD
Source driver circuit
TFT-LCD Panel
(1366×RGB×768 pixels)
G1
S1
S1366
G768
RGB
Timing
controller
CN3 (2pin)
Backlight assembly (2 CCFLs)
CN2 (2pin)
1. General Description
LC190WHX-XXXX is a Color Active Matrix Liquid Crystal Display with an integral Cold Cathode Fluorescent
Lamp (CCFL) backlight system. The matrix employs a-Si Thin Film Transistor as the active element. It is a
transmissive type display operating in the normally white mode. It has a 19.0 inch diagonally measured active
display area with WXGA resolution (768 vertical by 1366 horizontal pixel array) Each pixel is divided into Red,
Green and Blue sub-pixels or dots which are arranged in vertical stripes. Gray scale or the brightness of the
sub-pixel color is determined with a 8-bit gray scale signal for each dot, thus, presenting a palette of more than
16,7M colors with Advanced-FRC (Frame Rate Control). It has been designed to apply the interface method
that enables low power, high speed, low EMI. FPD Link or compatible must be used as a LVDS (Low Voltage
Differential Signaling) chip. It is intended to support applications where thin thickness, wide viewing angle, low
power are critical factors and graphic displays are important.
General Features
LVDS 1PortInterface
Viewing Angle Free ( R/L 170 (Typ), U/D 160 (Typ))Viewing Angle (CR>10)
16.7 M colorsColor Depth
1366 horiz. by 768 vert. Pixels RGB stripe arrangementPixel Format
300 cd/m2 (Center 1-point) (Typ.)Luminance, White
Total TBD W (Typ.) (Logic= TBD W, Backlight=10.50W @I
BL
=7.5mA)Power Consumption
1550g (Typ.) Weight
Transmissive mode, Normally WhiteDisplay Operating Mode
Hard coating(3H), Anti-glare treatment of the front polarizerSurface Treatment
0.10(H)mm x RGB x 0.30(V)mmPixel Pitch
430.4mm(H) x 254.6mm(V) x 13.0mm(D) (Typ.)Outline Dimension
18.51 inches (470.1mm) diagonalActive Screen Size
评论0
最新资源