部署yolov9模型ncnn模型到树莓派4或5嵌入式C++源码.zip

# YoloV9 Raspberry Pi 4/5  ## YoloV9 with the ncnn framework. <br/> [](https://opensource.org/licenses/BSD-3-Clause)<br/><br/> Paper: https://arxiv.org/pdf/2402.13616.pdf<br/><br/> Special made for a bare Raspberry Pi 4, see [Q-engineering deep learning examples](https://qengineering.eu/deep-learning-examples-on-raspberry-32-64-os.html) ------------ ## Benchmark. | Model | size | mAP | Jetson Nano | RPi 4 1950 | RPi 5 2900 | Rock 5 | | ------------- | :-----: | :-----: | :-------------: | :-------------: | :-----: | :-----: | | [NanoDet](https://github.com/Qengineering/NanoDet-ncnn-Raspberry-Pi-4) | 320x320 | 20.6 | 26.2 FPS | 13.0 FPS | 43.2 FPS |36.0 FPS | | [NanoDet Plus](https://github.com/Qengineering/NanoDetPlus-ncnn-Raspberry-Pi-4) | 416x416 | 30.4 | 18.5 FPS | 5.0 FPS | 30.0 FPS | 24.9 FPS | | [PP-PicoDet](https://github.com/Qengineering/PP-PicoDet-ncnn-Raspberry-Pi-4) | 320x320 | 27.0 | 24.0 FPS | 7.5 FPS | 53.7 FPS | 46.7 FPS | | [YoloFastestV2](https://github.com/Qengineering/YoloFastestV2-ncnn-Raspberry-Pi-4) | 352x352 | 24.1 | 38.4 FPS | 18.8 FPS | 78.5 FPS | 65.4 FPS | | [YoloV2](https://github.com/Qengineering/YoloV2-ncnn-Raspberry-Pi-4) ²⁰| 416x416 | 19.2 | 10.1 FPS | 3.0 FPS | 24.0 FPS | 20.0 FPS | | [YoloV3](https://github.com/Qengineering/YoloV3-ncnn-Raspberry-Pi-4) ²⁰| 352x352 tiny | 16.6 | 17.7 FPS | 4.4 FPS | 18.1 FPS | 15.0 FPS | | [YoloV4](https://github.com/Qengineering/YoloV4-ncnn-Raspberry-Pi-4) | 416x416 tiny | 21.7 | 16.1 FPS | 3.4 FPS | 26.8 FPS | 22.4 FPS | | [YoloV4](https://github.com/Qengineering/YoloV4-ncnn-Raspberry-Pi-4) | 608x608 full | 45.3 | 1.3 FPS | 0.2 FPS | 1.82 FPS | 1.5 FPS | | [YoloV5](https://github.com/Qengineering/YoloV5-ncnn-Raspberry-Pi-4) | 640x640 small | 22.5 | 5.0 FPS | 1.6 FPS | 14.9 FPS | 12.5 FPS | | [YoloV6](https://github.com/Qengineering/YoloV6-ncnn-Raspberry-Pi-4) | 640x640 nano | 35.0 | 10.5 FPS | 2.7 FPS | 25.0 FPS | 20.8 FPS | | [YoloV7](https://github.com/Qengineering/YoloV5-ncnn-Raspberry-Pi-4) | 640x640 tiny | 38.7 | 8.5 FPS | 2.1 FPS | 21.5 FPS | 17.9 FPS | | [YoloV8](https://github.com/Qengineering/YoloV8-ncnn-Raspberry-Pi-4) | 640x640 nano | 37.3 | 14.5 FPS | 3.1 FPS | 20.0 FPS | 16.3 FPS | | [YoloV8](https://github.com/Qengineering/YoloV8-ncnn-Raspberry-Pi-4) | 640x640 small | 44.9 | 4.5 FPS | 1.47 FPS | 11.0 FPS | 9.2 FPS | | [YoloV9](https://github.com/Qengineering/YoloV9-ncnn-Raspberry-Pi-4) | 640x640 comp | 53.0 | 1.2 FPS | 0.28 FPS | 1.5 FPS | 1.2 FPS | | [YoloX](https://github.com/Qengineering/YoloX-ncnn-Raspberry-Pi-4) | 416x416 nano | 25.8 | 22.6 FPS | 7.0 FPS | 34.2 FPS | 28.5 FPS | | [YoloX](https://github.com/Qengineering/YoloX-ncnn-Raspberry-Pi-4) | 416x416 tiny | 32.8 | 11.35 FPS | 2.8 FPS | 21.8 FPS | 18.1 FPS | | [YoloX](https://github.com/Qengineering/YoloX-ncnn-Raspberry-Pi-4) | 640x640 small | 40.5 | 3.65 FPS | 0.9 FPS | 9.0 FPS | 7.5 FPS | <b>²⁰</b> Recognize 20 objects (VOC) instead of 80 (COCO) ------------ ## Showstopper. At this time, the [authors](https://github.com/WongKinYiu/yolov9) have not yet released any small models. Only the compact and full are available.<br> Therefore, YoloV9 will be very slow on a Raspberry Pi. See also [issue #3](https://github.com/WongKinYiu/yolov9/issues/3) ------------ ## Dependencies. To run the application, you have to: - A Raspberry Pi 4 or 5 with a 32 or 64-bit operating system. It can be the Raspberry 64-bit OS, or Ubuntu 18.04 / 20.04. [Install 64-bit OS](https://qengineering.eu/install-raspberry-64-os.html) <br/> - The Tencent ncnn framework installed. [Install ncnn](https://qengineering.eu/install-ncnn-on-raspberry-pi-4.html) <br/> - OpenCV 64-bit installed. [Install OpenCV 4.5](https://qengineering.eu/install-opencv-4.5-on-raspberry-64-os.html) <br/> - Code::Blocks installed. (```$ sudo apt-get install codeblocks```) ------------ ## Installing the app. To extract and run the network in Code::Blocks <br/> $ mkdir *MyDir* <br/> $ cd *MyDir* <br/> $ wget https://github.com/Qengineering/YoloV9-ncnn-Raspberry-Pi-4/archive/refs/heads/main.zip <br/> $ unzip -j master.zip <br/> Remove master.zip, LICENSE and README.md as they are no longer needed. <br/> $ rm master.zip <br/> $ rm LICENSE <br/> $ rm README.md <br/> <br/> Your *MyDir* folder must now look like this: <br/> parking.jpg <br/> busstop.jpg <br/> YoloV9.cpb <br/> yoloV9.cpp <br/> yolov9c.bin <br/> yolov9c.param <br/> ------------ ## Running the app. To run the application load the project file YoloV9.cbp in Code::Blocks. More info or<br/> if you want to connect a camera to the app, follow the instructions at [Hands-On](https://qengineering.eu/deep-learning-examples-on-raspberry-32-64-os.html#HandsOn).<br/> ------------ ### Thanks. A more than special thanks to [***twlelev***](https://github.com/twlelev/Yolov9-Ncnn), who adapted the YoloV9 model to the ncnn framework.<br><br>  ------------ [](https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=CPZTM5BB3FCYL)