达内嵌入式培训全套资料
达内嵌入式培训的课程笔记,关于Linux下的C编程(应用开发)、系统移植(U-boot、Kernel和文件系统)、驱动开发的,PDF文字格式,带完整书签,格式比较工整,自认为还可以共享出去。
达内嵌入式培训的课程笔记,关于Linux下的C编程(应用开发)、系统移植(U-boot、Kernel和文件系统)、驱动开发的,PDF文字格式,带完整书签,格式比较工整,自认为还可以共享出去。
The TJA1050 is an advanced CAN transceiver for use in automotive and general industrial applications. It supports the differential bus signal representation being described in the international standard for invehicle CAN high-speed applications (ISO11898). Controller Area Network (CAN) is a serial bus protocol being primarily intended for transmission of control related data between a number of bus nodes.
Meets true EIA/TIA-232-F Standards from a +3.0V to +5.5V power supply ■ Minimum 120Kbps Data Rate Under Full Load ■ 1μA Low-Power Shutdown with Receivers Active (SP3222E) ■ Interoperable with RS-232 down to +2.7V power source ■ Enhanced ESD Specifications:
SH1106 is a single-chip CMOS OLED/PLED driver with controller for organic/polymer light emitting diode dot-matrix graphic display system. SH1106 consists of 132 segments, 64 commons that can support a maximum display resolution of 132 X 64. It is designed for Common Cathode type OLED panel.
Part Name: OEL Display Module Customer Part ID: Allvision Part ID: QG-2864KSWLG01 Ver: A
MY1690-16S 是深圳市迈优科技有限公司自主研发的一款由串口控制的插卡MP3芯片。支持MP3、WAV格式双解码,模块最大支持32G TF卡,也可外接U盘或USB数据线连接电脑更换SD卡音频文件。
FEATURES DESCRIPTION The LM4871 is a mono bridged audio power amplifier 2• No Output Coupling Capacitors, Bootstrap Capacitors, or Snubber Circuits Required capable of delivering 3W of continuous average power into a 3Ω load with less than 10% THD when • Unity-gain Stable powered by a 5V power supply (see Note). To • WSON, VSSOP, SOIC, or PDIP Packaging conserve power in portable applications, the • External Gain Configuration Capability LM4871's micropower shutdown mode (IQ = 0.6μA, typ) is activated when VDD is applied to the • Pin Compatible with the LM4861
Future Technology Devices International Ltd. FT232R USB UART IC
STM32 固件库 STM32 Standard Peripheral Libraries STM32 的固件库是芯片官方给出的用于新建