mb9bfxxx_usb_host-e.zip

========================================================================== Template Project for MB9BF506N Series ========================================================================== (C) Fujitsu Semiconductor Europe GmbH (FSEU) The following software deliverable is intended for and must only be used for reference and in an evaluation laboratory environment. It is provided on an as-is basis without charge and is subject to alterations. It is the user's obligation to fully test the software in its environment and to ensure proper functionality, qualification and compliance with component specifications. In the event the software deliverable includes the use of open source components, the provisions of the governing open source license agreement shall apply with respect to such software deliverable. FSEU does not warrant that the deliverables do not infringe any third party intellectual property right (IPR). In the event that the deliverables infringe a third party IPR it is the sole responsibility of the customer to obtain necessary licenses to continue the usage of the deliverable. To the maximum extent permitted by applicable law FSEU disclaims all warranties, whether express or implied, in particular, but not limited to, warranties of merchantability and fitness for a particular purpose for which the deliverable is not designated. To the maximum extent permitted by applicable law, FSEU's liability is restricted to intentional misconduct and gross negligence. FSEU is not liable for consequential damages. (V1.5) ========================================================================== History Date Ver AE IAR ARM Description 2011-03-30 1.0 MSc 6.10.3 4.10 original version ========================================================================== This example was created by the Fujitsu Usb Assistant. Additional code was written to show the usage of USB Mouse, USB Keyboard and USB Mass Storage, connected to the MCU. A terminal aplication is realized via UART 0, Settings: 115200,N,8 Clock settings: --------------- Crystal: 4 MHz HCLK: 80 MHz PCLK0: 40 MHz PCLK1: 40 MHz PCLK2: 40 MHz