没有合适的资源?快使用搜索试试~ 我知道了~
ADM213EARSZ-REEL ADI芯片 电子元器件中文版规格手册.pdf
需积分: 5 0 下载量 73 浏览量
2023-05-31
09:47:45
上传
评论
收藏 370KB PDF 举报
温馨提示
试读
21页
ADM213EARSZ-REEL ADI芯片 电子元器件中文版规格手册
资源推荐
资源详情
资源评论
EMI/EMC-Compliant, ±15 kV ESDProtected,
RS-232 Line Drivers/Receivers
ADM206E/ADM207E/ADM208E/ADM211E/ADM213E
Rev. E
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700 www.analog.com
Fax: 781.461.3113 ©2006 Analog Devices, Inc. All rights reserved.
FEATURES
Complies with 89/336/EEC EMC directive
ESD protection to IEC 1000-4-2 (801-2)
Contact discharge: ±8 kV
Air-gap discharge: ±15 kV
Human body model: ±15 kV
EFT/burst immunity (IEC 1000-4-4)
Low EMI emissions (EN 55022)
Eliminates need for TransZorb® suppressors
230 kbps data rate guaranteed
Single 5 V power supply
Shutdown mode 1 μW
Plug-in upgrade for MAX2xxE
Space saving TSSOP package available
APPLICATIONS
Laptop computers
Notebook computers
Printers
Peripherals
Modems
GENERAL DESCRIPTION
The ADM2xxE is a family of robust RS-232 and V.28 interface
devices that operate from a single 5 V power supply. These pro-
ducts are suitable for operation in harsh electrical environments
and are compliant with the EU directive on electromagnetic
compatibility (EMC) (89/336/EEC). The level of emissions and
immunity are both in compliance. EM immunity includes ESD
protection in excess of ±15 kV on all I/O lines (IEC 1000-4-2),
fast transient burst protection (IEC 100044), and radiated
immunity (IEC 1000-4-3). EM emissions include radiated and
conducted emissions as required by Information Technology
Equipment EN 55022, CISPR 22.
All devices fully conform to the EIA-232-E and CCITT V.28
specifications and operate at data rates up to 230 kbps. Shut-
down and enable control pins are provided on some of the
products (see
Table 1).
The shutdown function on the ADM211E disables the charge
pump and all transmitters and receivers. On the ADM213E the
CONNECTION DIAGRAM
0.1µF
6.3V
+
+
0.1µF
5
V
INPUT
+
0.1µF
10V
0.1µF
10V
+
0.1µF
10V
+
T1
T2
T3
T4
R1
R2
R3
R4
R5
GND
ADM211E/
ADM213E
T1
IN
T2
IN
T3
IN
T4
IN
R1
OUT
R2
OUT
R3
OUT
R4
OUT
R5
OUT
T1
OUT
T2
OUT
T3
OUT
T4
OUT
R1
IN
R2
IN
R3
IN
R4
IN
R5
IN
SHDN (ADM211E)
SHDN (ADM213E)
TTL/CMOS
INPUTS
1
T
TL/CMOS
OUTPUTS
RS-232
OUTPUTS
RS-232
INPUTS
2
1
INTERNAL 400kΩ PULL-UP RESISTOR ON EACH TTL/CMOS INPUT.
2
INTERNAL 5kΩ PULL-DOWN RESISTOR ON EACH RS-232 INPUT.
C1+
C1–
C2+
C2–
V
CC
V+
V–
EN (ADM211E)
EN (ADM213E)
12
14
15
16
11
13
17
2
3
1
28
9
4
27
23
18
25
7
6
20
21
8
5
26
22
19
24
10
0
0068-001
+5V TO +10V
VOLTAGE
DOUBLER
+10V TO –10V
VOLTAGE
INVERTER
Figure 1.
charge pump, all transmitters, and three of the five receivers are
disabled. The remaining two receivers remain active, thereby
allowing monitoring of peripheral devices. This feature allows
the device to be shut down until a peripheral device begins
communication. The active receivers can alert the processor,
which can then take the ADM213E out of the shutdown mode.
Operating from a single 5 V supply, four external 0.1 μF
capacitors are required.
The ADM207E and ADM208E are available in 24-lead PDIP, SSOP,
available in 28-lead SSOP, TSSOP, and SOIC_W packages. All
products are backward compatible with earlier ADM2xx products,
facilitating easy upgrading of older designs.
Table 1. Selection Table
Model Supply Voltage Drivers Receivers ESD Protection Shutdown Enable Packages
ADM206E 5 V 4 3 ±15 kV Yes Yes RW-24
ADM207E 5 V 5 3 ±15 kV No No N-24-1, RW-24, RS-24, RU-24
ADM208E 5 V 4 4 ±15 kV No No N-24-1, RW-24, RS-24, RU-24
ADM211E 5 V 4 5 ±15 kV Yes Yes RW-28, RS-28, RU-28
ADM213E 5 V 4 5 ±15 kV
Yes (
SHDN
)
1
Yes (EN) RW-28, RS-28, RU-28
1
Two receivers active.
ADM206E/ADM207E/ADM208E/ADM211E/ADM213E
Rev. E | Page 2 of 20
TABLE OF CONTENTS
Features .............................................................................................. 1
Applications....................................................................................... 1
General Description......................................................................... 1
Connection Diagram ....................................................................... 1
Revision History ............................................................................... 2
Specifications..................................................................................... 3
Absolute Maximum Ratings............................................................ 4
ESD Caution.................................................................................. 4
Pin Configurations and Function Descriptions ........................... 5
Typical Performance Characteristics ............................................. 8
Theory of Operation ...................................................................... 10
Circuit Description..................................................................... 10
Enable and Shutdown ................................................................ 10
High Baud Rate........................................................................... 11
ESD/EFT Transient Protection Scheme .................................. 11
ESD Testing (IEC 100042) ..................................................... 11
EFT/Burst Testing (IEC 100044)........................................... 12
IEC 1000-4-3 Radiated Immunity ........................................... 13
Emissions/Interference.............................................................. 14
Conducted Emissions................................................................ 14
Radiated Emissions.................................................................... 14
Outline Dimensions ....................................................................... 16
Ordering Guide .......................................................................... 19
REVISION HISTORY
9/06—Rev. D to Rev. E
Updated Format..................................................................Universal
Changes to Figure 1 and Table 1..................................................... 1
Changes to Table 2............................................................................ 3
Changes to Figure 2, Figure 3, and Figure 5.................................. 5
Changes to Figure 7 and Figure 9................................................... 6
Changes to Figure 11........................................................................ 7
Changes to Figure 17........................................................................ 8
Updated Outline Dimensions....................................................... 16
Changes to Ordering Guide .......................................................... 19
4/05—Rev. C to Rev. D
Changes to Specifications Section.................................................. 2
Changes to Ordering Guide ............................................................ 4
Updated Outline Dimensions......................................................... 6
3/01—Rev. B to Rev. C
Changes to Features Section ............................................................1
Changes to Specifications Table ......................................................2
Changes to Absolute Maximum Ratings........................................3
Changes to Figure 6 ..........................................................................5
Changes to Typical Performance Characteristics Section ...... 7, 8
Changes to Table V......................................................................... 11
ADM206E/ADM207E/ADM208E/ADM211E/ADM213E
Rev. E | Page 3 of 20
SPECIFICATIONS
V
CC
= 5.0 V ± 10%, C1 to C4 = 0.1 μF. All specifications T
MIN
to T
MAX
, unless otherwise noted.
Table 2.
Parameter Min Typ Max Unit Test Conditions/Comments
DC CHARACTERISTICS
Operating Voltage Range 4.5 5.0 5.5 V
V
CC
Power Supply Current 3.5 13 mA No load
SHUTDOWN SUPPLY CURRENT 0.2 10 μA
LOGIC
Input Pull-Up Current 10 25 μA T
IN
= GND
Input Logic Threshold Low, V
INL
0.8 V
T
IN
, EN, EN, SHDN, SHDN
Input Logic Threshold High, V
INH
2.0 V T
IN
Input Logic Threshold High, V
INH
2.0 V
EN,
EN, SHDN, SHDN
TTL/CMOS Output Voltage Low, V
OL
0.4 V I
OUT
= 1.6 mA
TTL/CMOS Output Voltage High, V
OH
3.5 V I
OUT
= −40 μA
TTL/CMOS Output Leakage Current +0.05 ±10 μA
EN = V
CC
, EN = GND, 0 V ≤ R
OUT
≤ V
CC
RS-232 RECEIVER
Input Voltage Range
1
−30 +30 V
Input Threshold Low 0.8 1.3 V
Input Threshold High 2.0 2.4 V
Input Hysteresis 0.65 V
Input Resistance 3 5 7 kΩ T
A
= 0°C to 85°C
RS-232 TRANSMITTER
Output Voltage Swing ±5.0 ±9.0 V All transmitter outputs loaded with 3 kΩ to ground
Output Resistance 300 Ω V
CC
= 0 V, V
OUT
= ±2 V
Output Short-Circuit Current ±6 ±20 ±60 mA
TIMING CHARACTERISTICS
Maximum Data Rate 230 kbps R
L
= 3 kΩ to 7 kΩ, C
L
= 50 pF to 2500 pF
Receiver Propagation Delay, TPHL, TPLH 0.4 2 μs C
L
= 150 pF
Receiver Output Enable Time, t
ER
120 ns
Receiver Output Disable Time, t
DR
120 ns
Transmitter Propagation Delay, TPHL, TPLH 1 μs R
L
= 3 kΩ, C
L
= 2500 pF
Transition Region Slew Rate 8 V/μs
R
L
= 3 kΩ, C
L
= 50 pF to 2500 pF, measured from
+3 V to −3 V or −3 V to +3 V
EM IMMUNITY
ESD Protection (I/O Pins) ±15 kV Human body model
±15 kV IEC 1000-4-2 air-gap discharge
±8 kV IEC 1000-4-2 contact discharge
Radiated Immunity 10 V/m IEC 1000-4-3
1
Guaranteed by design.
Table 3. ADM211E Truth Table
SHDN
EN
Status T
OUT
1:4 R
OUT
1:5
0 0 Normal operation Enabled Enabled
0 1 Normal operation Enabled Disabled
1 X
1
Shutdown Disabled Disabled
1
X = don’t care.
Table 4. ADM213E Truth Table
SHDN
EN Status T
OUT
1:4 R
OUT
1:3 R
OUT
4:5
0 0 Shutdown Disabled Disabled Disabled
0 1 Shutdown Disabled Disabled Enabled
1 0 Normal operation Enabled Disabled Disabled
1 1 Normal operation Enabled Enabled Enabled
ADM206E/ADM207E/ADM208E/ADM211E/ADM213E
Rev. E | Page 4 of 20
ABSOLUTE MAXIMUM RATINGS
T
A
= 25°C, unless otherwise noted.
Table 5.
Parameter Rating
V
CC
−0.3 V to +6 V
V+ (V
CC
– 0.3 V) to +14 V
V– +0.3 V to −14 V
Input Voltages
T
IN
−0.3 V to (V+ + 0.3 V)
R
IN
±30 V
Output Voltages
T
OUT
±15 V
R
OUT
−0.3 V to (V
CC
+ 0.3 V)
Short-Circuit Duration
T
OUT
Continuous
Power Dissipation
N-24-1 PDIP
(Derate 13.5 mW/°C above 70°C)
1000 mW
RW-24 SOIC_W
(Derate 12 mW/°C above 70°C)
900 mW
RS-24 SSOP
(Derate 12 mW/°C above 70°C)
850 mW
RU-24 TSSOP
(Derate 12 mW/°C above 70°C)
900 mW
RW-28 SOIC_W
(Derate 12 mW/°C above 70°C)
900 mW
RS-28 SSOP
(Derate 10 mW/°C above 70°C)
900 mW
RU-28 TSSOP
(Derate 12 mW/°C above 70°C)
900 mW
Operating Temperature Range −40°C to +85°C
Storage Temperature Range −65°C to +150°C
Lead Temperature, Soldering (10 sec) 300°C
ESD Rating
MIL-STD-883B (I/O Pins) ±15 kV
IEC 1000-4-2 Air-Gap (I/O Pins) ±15 kV
IEC 1000-4-2 Contact (I/O Pins) ±8 kV
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
ESD CAUTION
ADM206E/ADM207E/ADM208E/ADM211E/ADM213E
Rev. E | Page 5 of 20
PIN CONFIGURATIONS AND FUNCTION DESCRIPTIONS
TOP VIEW
(Not to Scale)
24
23
22
21
20
19
18
17
16
15
14
13
1
2
3
4
5
6
7
8
9
10
11
12
ADM206E
C1–
V+
C1+
V
CC
GND
T3
OUT
T1
OUT
T2
OUT
R1
IN
T1
IN
T2
IN
R1
OUT
C2+
C2–
V–
R3
IN
R3
OUT
T4
OUT
R2
IN
R2
OUT
SHDN
T3
IN
T4
IN
EN
00068-002
Figure 2. ADM206E Pin Configuration
+5V TO +10V
VOLTAGE
DOUBLER
0.1µF
6.3V
+
+
0.1µF
5V INPU
T
+
0.1µF
16V
0.1µF
6.3V
+
0.1µF
16V
+
T1
T2
T3
T4
R1
R2
R3
GND
ADM206E
T1
IN
T2
IN
T3
IN
T4
IN
R1
OUT
R2
OUT
R3
OUT
T1
OUT
T2
OUT
T3
OUT
T4
OUT
R1
IN
R2
IN
R3
IN
SHDN
TTL/CMOS
INPUTS
1
T
TL/CMOS
OUTPUTS
RS-232
OUTPUTS
RS-232
INPUTS
2
C1+
C1–
C2+
C2–
V+
V–
EN
1
INTERNAL 400k Ω PULL-UP RESISTOR ON EACH TTL/CMOS INPUT.
2
INTERNAL 5kΩ PULL-DOWN RESISTOR ON EACH RS-232 INPUT.
24
23
22
21
20
19
18
17
16
15
14
13
1
2
3
4
5
6
7
8
9
10
11
12
0
0068-003
+10V TO –10V
VOLTAGE
INVERTER
V
CC
Figure 3. ADM206E Typical Operating Circuit
TOP VIEW
(Not to Scale)
24
23
22
21
20
19
18
17
16
15
14
13
1
2
3
4
5
6
7
8
9
10
11
12
ADM207E
C1–
V+
C1+
V
CC
GND
T3
OUT
T1
OUT
T2
OUT
R1
IN
T1
IN
T2
IN
R1
OUT
C2+
C2–
V–
R3
IN
R3
OUT
T4
OUT
R2
IN
R2
OUT
T5
IN
T3
IN
T4
IN
T5
OUT
00068-004
Figure 4. ADM207E Pin Configuration
+10V TO –10V
VOLTAGE
INVERTER
+5V TO +10V
VOLTAGE
DOUBLER
0.1µF
6.3V
+
+
0.1µF
5V INPU
T
+
0.1µF
10V
0.1µF
10V
+
0.1µF
10V
+
T1
T2
T3
T4
R1
R2
R3
GND
ADM207E
T1
IN
T2
IN
T3
IN
T4
IN
R1
OUT
R2
OUT
R3
OUT
T1
OUT
T2
OUT
T3
OUT
T4
OUT
R1
IN
R2
IN
R3
IN
TTL/CMOS
INPUTS
1
T
TL/CMOS
OUTPUTS
RS-232
OUTPUTS
RS-232
INPUTS
2
1
INTERNAL 400kΩ PULL-UP RESISTOR ON EACH TTL/CMOS INPUT.
2
INTERNAL 5kΩ PULL-DOWN RESISTOR ON EACH RS-232 INPUT.
C1+
C1–
C2+
C2–
V
CC
V+
V–
T5
T5
IN
T5
OUT
24
23
20
16
15
4
8
9
11
19
18
14
13
21
6
7
10
12
1
3
2
00068-005
5
17
22
Figure 5. ADM207E Typical Operating Circuit
剩余20页未读,继续阅读
资源评论
芯脉芯城
- 粉丝: 3
- 资源: 4031
上传资源 快速赚钱
- 我的内容管理 展开
- 我的资源 快来上传第一个资源
- 我的收益 登录查看自己的收益
- 我的积分 登录查看自己的积分
- 我的C币 登录后查看C币余额
- 我的收藏
- 我的下载
- 下载帮助
最新资源
- Picasso_v3.1 2.ipa
- chromedriver-mac-arm64.zip
- 蓝zapro.apk
- chromedriver-linux64.zip
- UCAS研一深度学习实验-MNIST手写数字识别python源码+详细注释(高分项目)
- 基于Python和PyTorch框架完成的一个手写数字识别实验源码(带MINIST手写数字数据集)+详细注释(高分项目)
- 基于Matlab在MNIST数据集上利用CNN完成手写体数字识别任务,并实现单层CNN反向传播算法+源代码+文档说明(高分项目)
- NVIDIA驱动、CUDA和Pytorch及其依赖
- 基于SVM多特征融合的微表情识别python源码+项目说明+详细注释(高分课程设计)
- html动态爱心代码一(附源码)
资源上传下载、课程学习等过程中有任何疑问或建议,欢迎提出宝贵意见哦~我们会及时处理!
点击此处反馈
安全验证
文档复制为VIP权益,开通VIP直接复制
信息提交成功