Portable command line ISP for NXP LPC2000 family and Analog Devices ADUC 70xx
Version 1.79 compiled for Windows: Aug 4 2010, 10:55:56
Copyright (c) by Martin Maurer, 2003-2009, Email: Martin.Maurer@clibb.de
Portions Copyright (c) by Aeolus Development 2004, www.aeolusdevelopment.com
Syntax: lpc21isp [Options] file[ file[ ...]] comport baudrate Oscillator_in_kHz
Example: lpc21isp test.hex com1 115200 14746
Options: -bin for uploading binary file
-hex for uploading file in intel hex format (default)
-term for starting terminal after upload
-termonly for starting terminal without an upload
-localecho for local echo in terminal
-detectonly detect only used LPC chiptype (PHILIPSARM only)
-debug0 for no debug
-debug3 for progress info only
-debug5 for full debug
-donotstart do not start MCU after download
-try<n> try n times to synchronise
-wipe Erase entire device before upload
-control for controlling RS232 lines for easier booting
(Reset = DTR, EnableBootLoader = RTS)
-controlswap swap RS232 control lines
(Reset = RTS, EnableBootLoader = DTR)
-controlinv Invert state of RTS & DTR
(0=true/assert/set, 1=false/deassert/clear).
-verify Verify the data in Flash after every writes to
sector. To detect errors in writing to Flash ROM
-logfile for enabling logging of terminal output to lpc21isp.log
-halfduplex use halfduplex serial communication (i.e. with K-Line)
-ADARM for downloading to an Analog Devices
ARM microcontroller ADUC70xx
-PHILIPSARM for downloading to a microcontroller from
NXP(Philips) LPC13xx/LPC17xx/LPC2000 family (default)
请按任意键继续. . .
