MTK6225 Flash_tool.exe,烧录MTK BIN文件

================== FlashTool v2.9.1007 (2007/03/08) ================== Bug fixes: 1. Fix complete mapping table in ENFB on 512 Bytes/Page New features: 1. [DA] Supports new NOR Flash device [SPANSION] S29WS256N [SPANSION] S29GL128N_T [SPANSION] S29GL128N_B [SPANSION] S29GL256N_T [SPANSION] S29GL256N_B [SPANSION] S29GL512N_T [SPANSION] S29GL512N_B [SAMSUNG] K5L2731CAM [SAMSUNG] K5L2931CAM [SPANSION] S71PL127J [TOSHIBA] TY00689002APGN [SPANSION] S29GL064A_T [SPANSION] S29GL064A_B Enhancements: N/A ================== FlashTool v2.9.1006 (2006/11/25) ================== Bug fixes: 1. Fix NAND_TH58NVG1S3AFT Driver from 16-bit IO to 8-bit IO New features: 1. [BROM DLL/DA] Support MT6225 download. 2. [BROM DLL/DA] Support MT6230 download. 3. [BROM DLL/DA] Support MT6229E4 download. 4. [BROM DLL] Support ROMInfo_v5 5. [DA] Supports new NOR Flash device (AD-Mux) [SPANSION] S29NS064N [SPANSION] S29NS128N [SPANSION] S29NS256N Enhancements: N/A ================== FlashTool v2.9.1005 (2006/10/18) ================== Bug fixes: 1. [FlashTool/BROM_DLL] Fix AutoLoadByScatRegionName() update BootLoader fail. New features: 1. Enhaced-NFB (E-NFB) 2. [DA] Supports new NOR flash device. [SPANSION] S71WS128NB0BFWAN3 [ST] M58PPR256J [ST] M58PPR512J [SST] SST32HF3241C [SPANSION] S71WS512PD0HF3HR Enhancements: 1. Improve TY0068B012APGG download speed from 27KB/s to 60KB/s. 2. MT6225 + NOR Flash Booting downloading. ================== FlashTool v2.9.1004 (2006/08/11) ================== Bug fixes: 1. [BROM_DLL] Rollback BootROM read timeout to original 20ms in auto-boot mode, because some handset is very hard to connect under 4ms timeout. 2. [BROM_DLL] Fix Test DA download fail on MT6205/MT6205B. 3. [DA] Fix a Program fail When testing high address bug for flash. New features: N/A Enhancements: N/A ================== FlashTool v2.9.1003 (2006/08/09) ================== Bug fixes: 1. [BROM_DLL] Fix Format/Readback fail on MT6205/MT6205B. New features: N/A Enhancements: N/A ================== FlashTool v2.9.1002 (2006/07/21) ================== Bug fixes: 1. [BROM_DLL] Fix DA download error on MT6205/MT6205B. 2. [DA] Fix TestDA TEST_Write() fail in address bus test. New features: N/A Enhancements: N/A ================== FlashTool v2.9.1001 (2006/05/25) ================== Bug fixes: N/A New features: 1. [FlashTool/BROM_DLL] Support Multi-Load Autodetection Download. Enhancements: N/A ================== FlashTool v2.8.1001 (2006/05/23) ================== Bug fixes: 1. [DA] Fix a bug for wrong information about S71PL129N in Flash Device Table. 2. [DA] Fix a bug for Software Unlock Command Sequence wrong block address in Renesas driver. Within 64Mb, DQ7 in block address is fixed 0. 3. [FlashTool] Fix a bug to prevent Scroll back to Page1 when redrawing Test DA message. 4. [DA/BROM_DLL] Fix a bug for manually format failure on MT6228 NFB EVB. New features: 1. [FlashTool/BROM_DLL/DA] Support 6229 Download, add m_emi_gen_c in DRAM setting 2. [DA] Support High-Address-Bus pins test for NOR Flash. 3. [DA] Supports new NOR flash device. [SHARP] LRS18BK [INTEL] 28F3204C3TD70, [MemoCom] KS03204 4. [DA] Supports new NAND flash device. [TOSHIBA] TC58NWM9S3B Enhancements: N/A ================== FlashTool v2.7.1017 (2006/03/31) ================== Bug fixes: 1. [DA] Fix download failure for a binary that is smaller than sector size (eg. 8KB). 2. [DA] Fix <<<RAM_BEGIN>>> and <<<RAM_END>>> pattern interfere with INTEL Sibley/Woodmere flash in DetectExtRAM(). 3. [DA] Fix RENESAS superAND format validation failure problem. 4. [BROM_DLL] Set BootROM read timeout to 4ms to increase start command hit rate in auto-boot mode. 5. [BROM_DLL] Fix FAT range information doesn't store in DA_REPORT_T structure. 6. [BROM_DLL] Fix return code error. Detected a hardware failure, but returned the wrong failure return code "SOC check failure". 7. [FlashTool] Use known BBCHIP_TYPE and EXT_CLOCK to increase start command hit rate in "Reset to Factory Default" procedure. New features: 1. [BROM_DLL] Highly increasing BootROM baudrate to 115200 by baseband chip UART auto-baud feature. 2. [DA] Supports SST family NOR flash device. [SST] SST34HF16x1 [SST] SST34HF32x4 Enhancements: N/A ================== FlashTool v2.7.1016 (2006/03/08) ================== Bug fixes: 1. [BROM_DLL] Stop sending DA_FINISH_CMD command when DA_ENABLE_WATCHDOG_CMD is issued. 2. [BROM_DLL] Using local DA_REPORT_T variable to avoid multithread unsafe problem. New features: 1. [DA] Support RENESAS superAND flash read back and format operation. 2. [FlashTool&BROM_DLL] Auto-load bin files under scatter file's directory when scatter file is selected. 3. [BROM_DLL] Add DA_LoadByFilepathEx() and DA_LoadEx() to bypass DA validation. 4. [DA] Supports new NOR flash device. [INTEL] PF48F50xxM0x1xx [INTEL] PF48F40xxM0x0xx [INTEL] PF48F40xxM0x1xx 5. [DA] Supports new NAND flash device. [MICRON] MT29F2G08AAC [MICRON] MT29F4G08BAB [RENESAS] superAND 512Mb/8bits [RENESAS] superAND 512Mb/16bits [Infineon] HYF33DS51280 [Infineon] HYF33DS1G80 [Infineon] HYF33DS1G16 Enhancements: 1. [BROM_DLL] Dump BootROM start cmd sequence in debug log. ================== FlashTool v2.7.1015 (2006/01/14) ================== Bug fixes: 1. [FlashTool] Fix scatter file path doesn't update on UI. 2. [BROM_DLL&DA] Workaround reading DSP version failure issue in some production lines, rollback to the old method for reading DSP version. 3. [DA] Fix SHARP LH28F16 flash download fail problem. New features: 1. [DA] Supports INTEL Sibley family flash. 2. [DA] Supports new NOR flash device. [INTEL] PF38F5050M0XXXX Enhancements: 1. [FlashTool] Record normal mode and test mode DA path separatedly. 2. [BROM_DLL&DA] Enhance DA_FINISH_CMD protocol by adding ACK and delay. 3. [BROM_DLL] Dump debug log in BootROM write cmd. 4. [BROM_DLL] Modify timeout mechanism for more reasonable in DA_cmd::WriteData() and DA_cmd::WriteData(). 5. [BROM_DLL] Modify power key latch sequence and clear RTC alarm mask to enhance stability. 6. [DA] Remove unnecessary floating point code to reduce size in FlashTest_DA.bin. ================== FlashTool v2.7.1014 (2006/01/04) ================== Bug fixes: 1. [FlashTool] Fix NFI CS1 device takes no effect problem while selecting "enable NFI-CS1" flag. 2. [BROM_DLL] Fix 2GB NAND flash size display errror. 3. [DA] Fix Spansion S71PLXXXN detection problem by reading CFI info. 4. [DA] Fix TOSHIBA NAND flash callback function set, because TOSHIBA NAND flash doesn't support CopyBack command. New features: 1. [DA] Supports Spansion MirrorBit Buffer-Program method. 2. [DA] Supports new NOR flash device. [SPANSION] S71PL129N Enhancements: 1. [DA] Halt program when external RAM is less than 128KB. ================== FlashTool v2.7.1013 (2005/12/29) ================== Bug fixes: 1. [BROM_DLL] Fix BootROM start command failure while manually selecting MT6226 or MT6227 baseband chip. 2. [BROM_DLL] Access violation while loading a file smaller than 1MB. 3. [BROM_DLL] Fix timeout period inconsistent between baseband chip auto-detection and manual-detection methods. 4. [BROM_DLL] Fix SID bug, different baseband chips with the same SID should stop download. 5. [DA] Fix Single-Bank-Flash insufficient backup buffer problem. New features: 1. [FlashTool] Add download history feature. 2. [BROM_DLL] Support new baseband chip MT6226M. 3. [BROM_DLL] Add UsbComPortEnumerate() function for USB COM port enumeration. 4. [DA] Supports new NOR flash device. [SPANSION] S71PL127N [SILICON7] SV6D2832UTA [SILICON7] SV6D2832UBA [SILICON7] SV6C2832UTA [SILICON7] SV