TM5和YC软件合集.7z

y-cruncher Command-Line Manual -------------------------------------------------------------------------------- General Usage: y-cruncher [startup options] [option] [extra parameters] Examples: Run a Pi benchmark 500 million digits and skip any startup warnings: y-cruncher skip-warnings bench 500m Compute log(2) to 100 billion digits using 60GB ram and 4 drives in raid 0: y-cruncher custom log:2 -dec:100b -mode:swap -M:60g -swap:raid0 g:/ h:/ i:/ j:/ Run a configuration file: y-cruncher config config-name.ini y-cruncher config "my saved settings" The command line options described here only cover a subset of y-cruncher's full functionality. Simply put, the program is far too complicated for all of its features to be feasibly expressed with command line options in a usable manner. The only way to access the all the functionality is from the console UI, or with configuration files. Automation can be done through configuration files. -------------------------------------------------------------------------------- Startup Parameters: These parameters are all optional and must be passed before the [option] parameter. Pause at End of Computation: pause:1 Always pause at the end of a computation. pause:0 Default behavior - automatically decide whether to pause. pause:-1 Never pause at the end of a computation. Will pause on errors. pause:-2 Never pause at all, not even on errors. By default, y-cruncher will try to detect if it's run manually, or from the command line. If run manually, it will pause at the end of the computation to prevent the window from automatically closing. Otherwise, it will not pause. Skip Warnings: skip-warnings Skip all the startup warnings so you don't need to press ENTER to continue. Set Console Height: (Windows Only) height:{height in lines} (Examples: "height:60", "height:100") Sets the height of the console window the specified number of lines. This option is used by the HWBOT Submitter to size the window to exactly the expected height of the full output of a computation. This option is currently only supported in Windows. It is ignored in Linux. Priority: priority:{value} Run y-cruncher with the specified priority. The priority values differ between operating systems. Windows: 3 Realtime (Windows automatically downgrades it to "High".) 2 High 1 Above Normal 0 Normal -1 Below Normal (Default) -2 Low Linux: 0 Maximum Priority -1 Minimum Priority (Default) On Linux, privilege elevation may be needed for this option to work. Colors: colors:1 Enable console colors. (Default) colors:0 Disable console colors. Colors should be enabled for competitive benchmarking since disabling them may give an unfair performance advantage for small computations. Personally Identifiable Information: PII:1 Enable PII PII:-1 Disable PII PII:0 Default behavior (disabled) If enabled, it allows y-cruncher to read hardware serial numbers and include them in the validation files that it outputs. Currently, the only PII that y-cruncher can read is the motherboard's serial number. -------------------------------------------------------------------------------- Features: Many features share the same sub-parameters. Refer to the last section in this readme for descriptions on sub-parameters. -------------------------------------------------------------------------------- Run a Configuration File: {program} config {filename}[extension] y-cruncher config my-config.cfg y-cruncher config "file name with space" Run whatever is in the specified configuration file. If no extension is detected, it will automatically append ".cfg". Configuration files follow a JSON-like object format. The contents of the config format vary depending on the action that is being run. There is currently no documentation for the object configs. But y-cruncher can generate them automatically and they can be manually edited. -------------------------------------------------------------------------------- Benchmark Pi: {program} bench {size} [-o {output path}] [-od:{output digits}] [-TD:{tasks}] [-PF:{framework}] [-MA:{allocator}] y-cruncher bench 25m y-cruncher bench 1b -TD:8 y-cruncher bench 1b -TD:1 -PF:none y-cruncher bench 1b -od:0 The valid values for {size} are: 25m, 50m, 100m, 250m, 500m, 1b, 2.5b, 5b, 10b, 25b, 50b, 100b, 250b, 500b, 1t, 2.5t, 1M, 2M, 4M, 8M, 16M, 32M, 64M, 128M, 256M, 512M, 1G, 2G, 4G, 8G, 16G, 32G, 64G, 128G -------------------------------------------------------------------------------- Component Stress Tester: {program} stress [-M:{memory bytes}] [-D:{per test duration}] [-TL:{test time limit}] [algorithm] y-cruncher stress y-cruncher stress -M:3.5G -D:300 -TL:3600 FFT VST Runs a stress test using the specified parameters. Unspecified parameters are left at their defaults. By default, all algorithms are enabled. Specifying any algorithm disables the rest. Multiple algorithms can be specified. -D and -TL are measured in seconds. The valid values for [algorithm] are: BKT, FFT, N32, N64, HNT, VST, and C17 The "C17" algorithm is not available on all processors. -------------------------------------------------------------------------------- I/O Benchmark: {program} benchio [-M:{memory bytes}] [-TD:{tasks}] [-PF:{framework}] [-MA:{allocator}] [-minIO:{Min I/O Size}] [-swap:{mode} [configuration]] y-cruncher benchio -M:16.5G y-cruncher benchio -M:4g -TD:8 -minIO:512k Runs the I/O benchmark using the specified parameters. Unspecified parameters are left at their defaults. When "-swap" is not specified, it will use a single path at the current working directory. -------------------------------------------------------------------------------- Custom Compute: {program} custom {constant[:param]} [-algorithm:{#}] [-dec:{decimal digits}] [-hex:{hexadecimal digits}] [-o {output path}] [-od:{output digits}] [-C:{compress}] or [-compress:{compress}] [-verify:{0 or 1}] [-mode:{mode}] [-TD:{tasks}] [-PF:{framework}] [-MA:{allocator}] [-M:{memory bytes}] [-minIO:{Min I/O Size}] [-swap:{mode} [configuration]] y-cruncher custom catalan -dec:1000000 y-cruncher custom log:2 -algorithm:1 -dec:100b -hex:0 -o "c:/" -compress:1b -verify:1 -mode:swap -TD:64 -M:120g -minIO:512k -swap:raid0 g:/ h:/ i:/ j:/ Performs a custom computation using the specified parameters. The optional parameters are handled in the order they are specified as if they were manually entered into the Custom Compute menu UI. Automatic parameter correction and restrictions are done identically as in the UI. Therefore it is recommended to specify the parameters in the order they are listed above since that is the direction of the auto-correction dependencies. Parameter: {constant:[param]} Examples: pi, log:2, sqrt:3, custom:"filename" Valid Values: sqrt, phi, goldenratio, e, pi, log, apery, zeta(3), lemniscate, catalan, gamma, brent, cust