dtcwt_toolbox4_3.rar_ dtcwt_toolbox4_3_dtcwt_toolbox4_双树复小波_小波变换

Dual-Tree Complex Wavelet Transform Pack - version 4.3 Nick Kingsbury, Cambridge University, June 2003. This pack (version 4.2) includes the following functions for performing the Dual Tree Complex wavelet Transform on 1-D and 2-D signals: The main DT CWT functions: dtwavexfm => 1D DTCWT decomposition dtwaveifm => 1D DTCWT reconstruction dtwavexfm2 => 2D DTCWT decomposition dtwaveifm2 => 2D DTCWT reconstruction Lower level functions: colfilter => Column filtering of a matrix with symmetric extension coldfilt => Column filtering with decimation by 2, using 2 filters. colifilt => Column filtering with interpolation (upsampling) by 2, using 2 filters. reflect => Reflect a vector about max and min limits (used for sym extension). There are also equivalent functions for the usual Discrete Wavelet Transform (included mainly for comparison purposes): wavexfm => 1D DWT decomposition waveifm => 1D DWT reconstruction wavexfm2 => 2D DWT decomposition waveifm2 => 2D DWT reconstruction Lower level DWT functions: coldwtfilt => Column filtering with decimation by 2. coliwtfilt => Column filtering with interpolation (upsampling) by 2. There are 2 test M-files which show how the main functions can be used, and also demonstrate the shift invariance properties of the DT CWT, compared with the DWT, in both 1-D and 2-D: shift_test_1D => Demonstrate shift invariance in 1-D shift_test_2D => Demonstrate shift invariance in 1-D These M-files use the following ancilliary functions: draw => Draw an image in a correctly sized figure window. cimage5 => Draw a complex subimage using a colour palette for the complex numbers. drawcirc => Generate a circular disc image. setfig => Set up a predefined figure window. settitle => Set the title of a figure window. Various .MAT files contain the wavelet filter coefficients. To test the 1-D DTCWT package use the following Matlab commands: X = rand(512,1); figure; plot(X); drawnow [Yl,Yh] = dtwavexfm(X,5,'near_sym_b','qshift_b'); Z = dtwaveifm(Yl,Yh,'near_sym_b','qshift_b'); figure; plot(Z) dtcwt_error = max(abs(Z-X)) % Error should be < 1e-12 To test the 2-D DTCWT package use the following Matlab commands: load lenna figure; draw(X); drawnow [Yl,Yh] = dtwavexfm2(X,4,'near_sym_b','qshift_b'); Z = dtwaveifm2(Yl,Yh,'near_sym_b','qshift_b'); figure; draw(Z) dtcwt_error = max(abs(Z(:)-X(:))) % Error should be < 1e-12 For more interesting tests, run the M-files shift_test_1D and shift_test_2D. ******************************** Further information on the DT CWT can be obtained from papers downloadable from my website (given below). The best tutorial is in the 1999 Royal Society Paper. In particular this explains the conversion between 'real' quad-number subimages and pairs of complex subimages. The Q-shift filters are explained in the ICIP 2000 paper and in more detail in the May 2001 paper for the Journal on Applied and Computational Harmonic Analysis. This code is copyright and is supplied free of charge for research purposes only. In return for supplying the code, all I ask is that, if you use the algorithms, you give due reference to this work in any papers that you write and that you let me know if you find any good applications for the DT CWT. If the applications are good, I would be very interested in collaboration. I accept no liability arising from use of these algorithms. Nick Kingsbury, Cambridge University, June 2003. *********************************************************** Dr N G Kingsbury, Dept. of Engineering, University of Cambridge, Trumpington St., Cambridge CB2 1PZ, UK. or Trinity College, Cambridge CB2 1TQ, UK. Phone: (0 or +44) 1223 338514 / 332647; Home: 1954 211152; Fax: 1223 338564 / 332662; E-mail: [email protected] Web home page: http://www.eng.cam.ac.uk/~ngk/ *********************************************************** Version 4.3: Bug corrected at lines 45 and 48 of waveifm2.m (LoLo instead of Lo). June 2003.