daima.rar_GPIO_按键和灯扫描

/******************************************************************/ /*Copyright (C), 2008-2009, 力天电子，LiTian Tech.Co.Ltd. */ /* Module Name : system */ /* File Name : DSP281x_DefaultIsr.c */ /* Author : 侯长波 */ /* Create Date : 2009/12/1 */ /* Version : 2.0 */ /* Function : system */ /* Description : DSP281x默认中断函数定义 */ /* Support : www.LT430.com */ /******************************************************************/ #include "DSP281x_Device.h" // Note CPU-Timer1 ISR is reserved for TI use. interrupt void INT13_ISR(void) // INT13 or CPU-Timer1 { // Insert ISR Code here // Next two lines for debug only to halt the processor here // Remove after inserting ISR Code asm (" ESTOP0"); for(;;); } // Note CPU-Timer2 ISR is reserved for TI use. interrupt void INT14_ISR(void) // CPU-Timer2 { // Insert ISR Code here // Next two lines for debug only to halt the processor here // Remove after inserting ISR Code asm (" ESTOP0"); for(;;); } interrupt void DATALOG_ISR(void) // Datalogging interrupt { // Insert ISR Code here // Next two lines for debug only to halt the processor here // Remove after inserting ISR Code asm (" ESTOP0"); for(;;); } interrupt void RTOSINT_ISR(void) // RTOS interrupt { // Insert ISR Code here // Next two lines for debug only to halt the processor here // Remove after inserting ISR Code asm (" ESTOP0"); for(;;); } interrupt void EMUINT_ISR(void) // Emulation interrupt { // Insert ISR Code here // Next two lines for debug only to halt the processor here // Remove after inserting ISR Code asm (" ESTOP0"); for(;;); } interrupt void NMI_ISR(void) // Non-maskable interrupt { // Insert ISR Code here // Next two lines for debug only to halt the processor here // Remove after inserting ISR Code asm (" ESTOP0"); for(;;); } interrupt void ILLEGAL_ISR(void) // Illegal operation TRAP { // Insert ISR Code here // Next two lines for debug only to halt the processor here // Remove after inserting ISR Code asm(" ESTOP0"); for(;;); } interrupt void USER1_ISR(void) // User Defined trap 1 { // Insert ISR Code here // Next two lines for debug only to halt the processor here // Remove after inserting ISR Code asm (" ESTOP0"); for(;;); } interrupt void USER2_ISR(void) // User Defined trap 2 { // Insert ISR Code here // Next two lines for debug only to halt the processor here // Remove after inserting ISR Code asm (" ESTOP0"); for(;;); } interrupt void USER3_ISR(void) // User Defined trap 3 { // Insert ISR Code here // Next two lines for debug only to halt the processor here // Remove after inserting ISR Code asm (" ESTOP0"); for(;;); } interrupt void USER4_ISR(void) // User Defined trap 4 { // Insert ISR Code here // Next two lines for debug only to halt the processor here // Remove after inserting ISR Code asm (" ESTOP0"); for(;;); } interrupt void USER5_ISR(void) // User Defined trap 5 { // Insert ISR Code here // Next two lines for debug only to halt the processor here // Remove after inserting ISR Code asm (" ESTOP0"); for(;;); } interrupt void USER6_ISR(void) // User Defined trap 6 { // Insert ISR Code here // Next two lines for debug only to halt the processor here // Remove after inserting ISR Code asm (" ESTOP0"); for(;;); } interrupt void USER7_ISR(void) // User Defined trap 7 { // Insert ISR Code here // Next two lines for debug only to halt the processor here // Remove after inserting ISR Code asm (" ESTOP0"); for(;;); } interrupt void USER8_ISR(void) // User Defined trap 8 { // Insert ISR Code here // Next two lines for debug only to halt the processor here // Remove after inserting ISR Code asm (" ESTOP0"); for(;;); } interrupt void USER9_ISR(void) // User Defined trap 9 { // Insert ISR Code here // Next two lines for debug only to halt the processor here // Remove after inserting ISR Code asm (" ESTOP0"); for(;;); } interrupt void USER10_ISR(void) // User Defined trap 10 { // Insert ISR Code here // Next two lines for debug only to halt the processor here // Remove after inserting ISR Code asm (" ESTOP0"); for(;;); } interrupt void USER11_ISR(void) // User Defined trap 11 { // Insert ISR Code here // Next two lines for debug only to halt the processor here // Remove after inserting ISR Code asm (" ESTOP0"); for(;;); } interrupt void USER12_ISR(void) // User Defined trap 12 { // Insert ISR Code here // Next two lines for debug only to halt the processor here // Remove after inserting ISR Code asm (" ESTOP0"); for(;;); } // ----------------------------------------------------------- // PIE Group 1 - MUXed into CPU INT1 // ----------------------------------------------------------- // INT1.1 interrupt void PDPINTA_ISR( void ) // EV-A { // Insert ISR Code here // To receive more interrupts from this PIE group, acknowledge this interrupt // PieCtrlRegs.PIEACK.all = PIEACK_GROUP1; // Next two lines for debug only to halt the processor here // Remove after inserting ISR Code asm (" ESTOP0"); for(;;); } // INT1.2 interrupt void PDPINTB_ISR(void) // EV-B { // Insert ISR Code here // To receive more interrupts from this PIE group, acknowledge this interrupt // PieCtrlRegs.PIEACK.all = PIEACK_GROUP1; // Next two lines for debug only to halt the processor here // Remove after inserting ISR Code asm (" ESTOP0"); for(;;); } // INT1.3 - Reserved // INT1.4 interrupt void XINT1_ISR(void) { // Insert ISR Code here // To receive more interrupts from this PIE group, acknowledge this interrupt // PieCtrlRegs.PIEACK.all = PIEACK_GROUP1; // Next two lines for debug only to halt the processor here // Remove after inserting ISR Code asm (" ESTOP0"); for(;;); } // INT1.5 interrupt void XINT2_ISR(void) { // Insert ISR Code here // To receive more interrupts from this PIE group, acknowledge this interrupt // PieCtrlRegs.PIEACK.all = PIEACK_GROUP1; // Next two lines for debug only to halt the processor here // Remove after inserting ISR Code asm (" ESTOP0"); for(;;); } // INT1.6 interrupt void ADCINT_ISR(void) // ADC { // Insert ISR Code here // To receive more interrupts from this PIE group, acknowledge this interrupt // PieCtrlRegs.PIEACK.all = PIEACK_GROUP1; // Next two lines for debug only to halt the processor here // Remove after inserting ISR Code asm (" ESTOP0"); for(;;); } // INT1.7 interrupt void TINT0_ISR(void) // CPU-Timer 0 { // Insert ISR Code here // To receive more interrupts from this PIE group, acknowledge this interrupt // PieCtrlRegs.PIEACK.all = PIEACK_GROUP1; // Next two lines for debug only to halt the processor here // Remove after inserting ISR Code asm (" ESTOP0"); for(;;); } // INT1.8 interrupt void WAKEINT_ISR(void) // WD { // Insert ISR Code here // To receive more interrupts from this PIE group, acknowledge this interrupt // PieCtrlRegs.PIEACK.