//###########################################################################
//
// FILE: DSP28_DefaultIsr.c
//
// TITLE: DSP28 Device Default Interrupt Service Routines.
//
//###########################################################################
//
// Ver | dd mmm yyyy | Who | Description of changes
// =====|=============|======|===============================================
// 0.55| 06 May 2002 | L.H. | EzDSP Alpha Release
// 0.56| 20 May 2002 | L.H. | No change
// 0.57| 27 May 2002 | L.H. | No change
//###########################################################################
#include "DSP28_Device.h"
//---------------------------------------------------------------------------
// INT13, INT14, NMI, XINT1, XINT2 Default ISRs:
//
interrupt void INT13_ISR(void) // INT13 or CPU-Timer1
{
// Insert ISR Code here
// Next two lines for debug only - remove after inserting
// ISR Code
asm (" ESTOP0");
for(;;);
// Uncomment this line after adding ISR Code
// return;
}
interrupt void INT14_ISR(void) // CPU-Timer2
{
// Insert ISR Code here
// Next two lines for debug only - remove after inserting
// ISR Code
asm (" ESTOP0");
for(;;);
// Uncomment this line after adding ISR Code
// return;
}
interrupt void NMI_ISR(void) // Non-maskable interrupt
{
// Insert ISR Code here
// Next two lines for debug only - remove after inserting
// ISR Code
asm (" ESTOP0");
for(;;);
// Uncomment this line after adding ISR Code
// return;
}
interrupt void XINT1_ISR(void)
{
// Insert ISR Code here
// Next two lines for debug only - remove after inserting
// ISR Code
asm (" ESTOP0");
for(;;);
// Uncomment this line after adding ISR Code
// return;
}
interrupt void XINT2_ISR(void)
{
// Insert ISR Code here
// Next two lines for debug only - remove after inserting
// ISR Code
asm (" ESTOP0");
for(;;);
// Uncomment this line after adding ISR Code
// return;
}
//---------------------------------------------------------------------------
// DATALOG, RTOSINT, EMUINT, RTOS Default ISRs:
//
interrupt void DATALOG_ISR(void) // Datalogging interrupt
{
// Insert ISR Code here
// Next two lines for debug only - remove after inserting
// ISR Code
asm (" ESTOP0");
for(;;);
// Uncomment this line after adding ISR Code
// return;
}
interrupt void RTOSINT_ISR(void) // RTOS interrupt
{
// Insert ISR Code here
// Next two lines for debug only - remove after inserting
// ISR Code
asm (" ESTOP0");
for(;;);
// Uncomment this line after adding ISR Code
// return;
}
interrupt void EMUINT_ISR(void) // Emulation interrupt
{
// Insert ISR Code here
// Next two lines for debug only - remove after inserting
// ISR Code
asm (" ESTOP0");
for(;;);
// Uncomment this line after adding ISR Code
// return;
}
//---------------------------------------------------------------------------
// ILLEGAL Instruction Trap ISR:
//
interrupt void ILLEGAL_ISR(void) // Illegal operation TRAP
{
// Insert ISR Code here
asm(" ESTOP0");
for(;;);
// Uncomment this line after adding ISR Code
// return;
}
//---------------------------------------------------------------------------
// USER Traps Default ISRs:
//
interrupt void USER0_ISR(void) // User Defined trap 0
{
// Insert ISR Code here
// Next two lines for debug only - remove after inserting
// ISR Code
asm (" ESTOP0");
for(;;);
// Uncomment this line after adding ISR Code
// return;
}
interrupt void USER1_ISR(void) // User Defined trap 1
{
// Insert ISR Code here
// Next two lines for debug only - remove after inserting
// ISR Code
asm (" ESTOP0");
for(;;);
// Uncomment this line after adding ISR Code
// return;
}
interrupt void USER2_ISR(void) // User Defined trap 2
{
// Insert ISR Code here
// Next two lines for debug only - remove after inserting
// ISR Code
asm (" ESTOP0");
for(;;);
// Uncomment this line after adding ISR Code
// return;
}
interrupt void USER3_ISR(void) // User Defined trap 3
{
// Insert ISR Code here
// Next two lines for debug only - remove after inserting
// ISR Code
asm (" ESTOP0");
for(;;);
// Uncomment this line after adding ISR Code
// return;
}
interrupt void USER4_ISR(void) // User Defined trap 4
{
// Insert ISR Code here
// Next two lines for debug only - remove after inserting
// ISR Code
asm (" ESTOP0");
for(;;);
// Uncomment this line after adding ISR Code
// return;
}
interrupt void USER5_ISR(void) // User Defined trap 5
{
// Insert ISR Code here
// Next two lines for debug only - remove after inserting
// ISR Code
asm (" ESTOP0");
for(;;);
// Uncomment this line after adding ISR Code
// return;
}
interrupt void USER6_ISR(void) // User Defined trap 6
{
// Insert ISR Code here
// Next two lines for debug only - remove after inserting
// ISR Code
asm (" ESTOP0");
for(;;);
// Uncomment this line after adding ISR Code
// return;
}
interrupt void USER7_ISR(void) // User Defined trap 7
{
// Insert ISR Code here
// Next two lines for debug only - remove after inserting
// ISR Code
asm (" ESTOP0");
for(;;);
// Uncomment this line after adding ISR Code
// return;
}
interrupt void USER8_ISR(void) // User Defined trap 8
{
// Insert ISR Code here
// Next two lines for debug only - remove after inserting
// ISR Code
asm (" ESTOP0");
for(;;);
// Uncomment this line after adding ISR Code
// return;
}
interrupt void USER9_ISR(void) // User Defined trap 9
{
// Insert ISR Code here
// Next two lines for debug only - remove after inserting
// ISR Code
asm (" ESTOP0");
for(;;);
// Uncomment this line after adding ISR Code
// return;
}
interrupt void USER10_ISR(void) // User Defined trap 10
{
// Insert ISR Code here
// Next two lines for debug only - remove after inserting
// ISR Code
asm (" ESTOP0");
for(;;);
// Uncomment this line after adding ISR Code
// return;
}
interrupt void USER11_ISR(void) // User Defined trap 11
{
// Insert ISR Code here
// Next two lines for debug only - remove after inserting
// ISR Code
asm (" ESTOP0");
for(;;);
// Uncomment this line after adding ISR Code
// return;
}
//---------------------------------------------------------------------------
// ADC Default ISR:
//
interrupt void ADCINT_ISR(void) // ADC
{
// Insert ISR Code here
// To recieve more interrupts from this PIE group, acknowledge this interrupt
// PieCtrl.PIEACK.all = PIEACK_GROUP1;
// Next two lines for debug only - remove after inserting
// ISR Code
asm (" ESTOP0");
for(;;);
// Uncomment this line after adding ISR Code
// return;
}
//---------------------------------------------------------------------------
// CPU Timer 0 Default ISR:
//
interrupt void TINT0_ISR(void) // CPU-Timer 0
{
// Insert ISR Code here
// To recieve more interrupts from this PIE group, acknowledge this interrupt
// PieCtrl.PIEACK.all = PIEACK_GROUP1;
// Next two lines for debug only - remove after inserting
// ISR Code
asm (" ESTOP0");
for(;;);
// Uncomment this line after adding ISR Code
// return;
}
//---------------------------------------------------------------------------
// Watchdog Default ISR:
//
interrupt void WAKEINT_ISR(void) // WD
{
DAC.rar （70个子文件） 
EX10_DAC 
DSP28_ECan.h 46KB DSP28_Gpio.c 2KB DSP28_GlobalPrototypes.h 1KB DAC.PJT 1KB Debug.lkv 656B DSP28_Xintf.h 4KB Recycled(004).sys 0B DSP28_DefaultIsr.c 25KB DSP28_SysCtrl.h 10KB DSP28_Adc.c 3KB DSP28_Sci.c 1KB Recycled(001).sys 0B main.c 3KB DAC.CS_ SYMBOL.DBF 206KB FILE.CDX 3KB FILE.FPT 1KB FILE.DBF 1KB SYMBOL.FPT 358KB SYMBOL.CDX 275KB DAC.PAF 6KB DSP28_PieCtrl.c 2KB DSP28_CpuTimers.h 5KB DAC.paf2 7KB Recycled.sys 0B DSP28_Adc.h 6KB DSP28_SysCtrl.c 3KB DSP28_Gpio.h 29KB DSP28_Ev.h 20KB DSP28_InitPeripherals.c 1KB Debug.lkf 656B DSP28_Device.h 4KB DSP28_Mcbsp.h 34KB DSP28_ECan.c 1KB DSP28_Spi.c 2KB DSP28_PieCtrl.h 6KB DSP28_XIntrupt.h 2KB DSP28_Spi.h 6KB DSP28_XIntrupt.c 1KB SRAM.CMD 4KB DSP28_Ev.c 1KB DSP28_CpuTimers.c 4KB Recycled(002).sys 0B RTS2800N.LIB 167KB DSP28_Mcbsp.c 1KB DSP28_Xintf.c 3KB DSP28_DevEmu.h 2KB F2812.GEL 6KB Recycled(005).sys 0B Recycled(003).sys 0B DAC.sbl 4KB DSP28_GlobalVariableDefs.c 3KB DSP28_Sci.h 8KB DSP28_PieVect.h 6KB Debug DSP28_DefaultIsr.obj 11KB DSP28_InitPeripherals.obj 523B DSP28_Adc.obj 8KB DSP28_Gpio.obj 11KB DSP28_PieCtrl.obj 4KB DSP28_PieVect.obj 13KB DSP28_Spi.obj 5KB DSP28_GlobalVariableDefs.obj 135KB main.obj 22KB Dac.map 14KB Dac.out 154KB DSP28_SysCtrl.obj 5KB Recycled(000).sys 0B DSP28_DefaultIsr.h 5KB FLASH.CMD 5KB cc_build_Debug.log 334B DSP28_PieVect.c 5KB资源评论
