#include "C8051F340.h"
#include "n_5110.h"
#include "english.h"
/*-----------------------------------------------------------------------
LCD_init : 3310LCD初始化
编写日期 :2004-8-10
最后修改日期 :2004-8-10
-----------------------------------------------------------------------*/
void delay_1us(void) //1us延时函数
{
unsigned int i;
for(i=0;i<1000;i++);
}
void delay_1ms(void) //1ms延时函数
{
unsigned int i;
for (i=0;i<1140;i++);
}
void delay_nms(unsigned int n) //N ms延时函数
{
unsigned int i=0;
for (i=0;i<n;i++)
delay_1ms();
}
void LCD_init(void)
{
// 产生一个让LCD复位的低电平脉冲
LCD_RST = 0;
delay_1us();
LCD_RST = 1;
// 关闭LCD
LCD_CE = 0;
delay_1us();
// 使能LCD
LCD_CE = 1;
delay_1us();
LCD_write_byte(0x21, 0); // 使用扩展命令设置LCD模式
LCD_write_byte(0xc8, 0); // 设置偏置电压
LCD_write_byte(0x06, 0); // 温度校正
LCD_write_byte(0x13, 0); // 1:48
LCD_write_byte(0x20, 0); // 使用基本命令
LCD_clear(); // 清屏
LCD_write_byte(0x0c, 0); // 设定显示模式,正常显示
// 关闭LCD
LCD_CE = 0;
}
/*-----------------------------------------------------------------------
LCD_clear : LCD清屏函数
编写日期 :2004-8-10
最后修改日期 :2004-8-10
-----------------------------------------------------------------------*/
void LCD_clear(void)
{
unsigned int i;
LCD_write_byte(0x0c, 0);
LCD_write_byte(0x80, 0);
for (i=0; i<504; i++)
LCD_write_byte(0, 1);
}
/*-----------------------------------------------------------------------
LCD_set_XY : 设置LCD坐标函数
输入参数:X :0-83
Y :0-5
编写日期 :2004-8-10
最后修改日期 :2004-8-10
-----------------------------------------------------------------------*/
void LCD_set_XY(unsigned char X, unsigned char Y)
{
LCD_write_byte(0x40 | Y, 0); // column
LCD_write_byte(0x80 | X, 0); // row
}
/*-----------------------------------------------------------------------
LCD_write_char : 显示英文字符
输入参数:c :显示的字符;
编写日期 :2004-8-10
最后修改日期 :2004-8-10
-----------------------------------------------------------------------*/
void LCD_write_char(unsigned char c)
{
unsigned char line;
c -= 32;
for (line=0; line<6; line++)
LCD_write_byte(font6x8[c][line], 1);
}
/*-----------------------------------------------------------------------
LCD_write_english_String : 英文字符串显示函数
输入参数:*s :英文字符串指针;
X、Y : 显示字符串的位置,x 0-83 ,y 0-5
编写日期 :2004-8-10
最后修改日期 :2004-8-10
-----------------------------------------------------------------------*/
void LCD_write_english_string(unsigned char X,unsigned char Y,char *s)
{
LCD_set_XY(X,Y);
while (*s)
{
LCD_write_char(*s);
s++;
}
}
/*-----------------------------------------------------------------------
LCD_write_chinese_string: 在LCD上显示汉字
输入参数:X、Y :显示汉字的起始X、Y坐标;
ch_with :汉字点阵的宽度
num :显示汉字的个数;
line :汉字点阵数组中的起始行数
row :汉字显示的行间距
编写日期 :2004-8-11
最后修改日期 :2004-8-12
测试:
LCD_write_chi(0,0,12,7,0,0);
LCD_write_chi(0,2,12,7,0,0);
LCD_write_chi(0,4,12,7,0,0);
-----------------------------------------------------------------------*/
/*void LCD_write_chinese_string(unsigned char X, unsigned char Y,
unsigned char ch_with,unsigned char num,
unsigned char line,unsigned char row)
{
unsigned char i,n;
LCD_set_XY(X,Y); //设置初始位置
for (i=0;i<num;)
{
for (n=0; n<ch_with*2; n++) //写一个汉字
{
if (n==ch_with) //写汉字的下半部分
{
if (i==0) LCD_set_XY(X,Y+1);
else
LCD_set_XY((X+(ch_with+row)*i),Y+1);
}
LCD_write_byte(write_chinese[line+i][n],1);
}
i++;
LCD_set_XY((X+(ch_with+row)*i),Y);
}
}
*/
/*-----------------------------------------------------------------------
LCD_draw_map : 位图绘制函数
输入参数:X、Y :位图绘制的起始X、Y坐标;
*map :位图点阵数据;
Pix_x :位图像素(长)
Pix_y :位图像素(宽)
编写日期 :2004-8-13
最后修改日期 :2004-8-13
-----------------------------------------------------------------------*/
void LCD_draw_bmp_pixel(unsigned char X,unsigned char Y,unsigned char *map,
unsigned char Pix_x,unsigned char Pix_y)
{
unsigned int i,n;
unsigned char row;
if (Pix_y%8==0) row=Pix_y/8; //计算位图所占行数
else
row=Pix_y/8+1;
for (n=0;n<row;n++)
{
LCD_set_XY(X,Y);
for(i=0; i<Pix_x; i++)
{
LCD_write_byte(map[i+n*Pix_x], 1);
}
Y++; //换行
}
}
/*-----------------------------------------------------------------------
LCD_write_byte : 使用SPI接口写数据到LCD
输入参数:data :写入的数据;
command :写数据/命令选择;
编写日期 :2004-8-10
最后修改日期 :2004-8-13
-----------------------------------------------------------------------*/
void LCD_write_byte(unsigned char dat, unsigned char command)
{
unsigned char i;
//PORTB &= ~LCD_CE ; // 使能LCD
LCD_CE = 0;
if (command == 0)
// PORTB &= ~LCD_DC ; // 传送命令
LCD_DC = 0;
else
// PORTB |= LCD_DC ; // 传送数据
LCD_DC = 1;
for(i=0;i<8;i++)
{
if(dat&0x80)
SDIN = 1;
else
SDIN = 0;
SCLK = 0;
dat = dat << 1;
SCLK = 1;
}
// SPDR = data; // 传送数据到SPI寄存器
//while ((SPSR & 0x80) == 0); // 等待数据传送完毕
//PORTB |= LCD_CE ; // 关闭LCD
LCD_CE = 1;
}
/*-----------------------------------------------------------------------
LCD_write_shuzi : 数字转换
-----------------------------------------------------------------------*/
void LCD_write_shuzi(unsigned char X,unsigned char Y,unsigned char Value)
{
unsigned char wan,qian,bai,shi,ge;
LCD_set_XY(X,Y);
// wan=Value/10000+0x30;
//qian=(Value%10000)/1000+0x30;
bai=(Value%10000%1000)/100+0x30;
shi=(Value%10000%1000%100)/10+0x30;
ge=Value%10000%1000%100%10+0x30;
// LCD_write_char(wan);
// LCD_write_char(qian);
LCD_write_char(bai);
LCD_write_char(shi);
LCD_write_char(ge);
}
wenshidu.zip_dht21
版权申诉
69 浏览量
2022-09-24
03:39:52
上传
评论
收藏 50KB ZIP 举报
周楷雯
- 粉丝: 80
- 资源: 1万+
最新资源
- 基于图像的三维模型重建C++源代码+文档说明(高分课程设计)
- 基于聚焦法的工件立体测量方案,根据数据进行三维重建 使用HALCON处理图像,MATLAB拟合数据+源代码+数据集+效果图
- 锄战三国村 修改:货币使用不减 v1.10(2) 原创 (中文).apk
- 基于python实现的单目双目视觉三维重建+源代码+图像图片(高分课程设计)
- 基于C+++OPENCV的全景图像拼接源码(课程设计)
- 基于Python+OpenCV对多张图片进行全景图像拼接,消除鬼影,消除裂缝+源代码+文档说明+界面截图(高分课程设计)
- 基于C++实现的全景图像拼接源码(课程设计)
- 基于SIFT特征点提取和RASIC算法实现全景图像拼接python源码+文档说明+界面截图+详细注释(95分以上课程大作业)
- 基于matlab实现眼部判别的疲劳检测系统+源代码+全部数据+文档说明+详细注释+使用说明+截图(高分课程设计)
- 基于Matlab的异常姿势识别系统+源代码+全部数据+文档说明+详细注释+使用说明+截图(高分课程设计)
资源上传下载、课程学习等过程中有任何疑问或建议,欢迎提出宝贵意见哦~我们会及时处理!
点击此处反馈