电路笔记电路笔记
CN-0192CN-0192
连接/参考器件 连接/参考器件
AD2S1210
分辨率可变、10 位至 16 位 R/D 转
换器,内置参考振荡器
Circuit from the Lab
TM
实验室电路是经过测试的电路设
计,用于解决常见的设计挑战,方便设计人员轻松快捷
地实现系统集成。有关更多信息和
/
或技术支持,请访
问:
www.analog.com/zh/CN0192
。
AD8662
双通道、低噪声、精密、16 V CMOS
轨到轨输出运算放大器
用于AD2S1210 旋变数字参考信号输出的高电流驱动器
评估与设计支持
电路评估板
AD2S1210 评估板(EVAL-AD2S1210EDZ)
转换器评估与开发板(EVAL-CED1Z)
设计与集成文件
原理图、布局文件、材料清单
电路功能与优势
旋变数字转换器(RDC)广泛用于汽车和工业应用中,用来提供
电机轴位置/速度反馈信息。
AD2S1210是一款完整的 10 位至 16 位分辨率RDC,片内集成
可编程正弦波振荡器,为旋变器提供激励。由于工作环境恶劣,
AD2S1210(C 级和 D 级)的额定温度范围为−40°C 至+125°C
的扩展工业温度范围。
图 1 所示的高电流驱动器放大AD2S1210 的参考振荡器输出并
进行电平转换,从而优化与旋变器的接口。该驱动器是一个使
用双通道、低噪声、精密运算放大器AD8662和分立互补发射
极跟随器输出级的复合放大器。一个类似的驱动器级用于互补
激励输出,从而提供一个全差分信号来驱动旋变器初级绕组。
AD8662 提供 8 引脚窄体SOIC和 8 引脚MSOP两种封装,额定
温度范围均为−40°C至+125°C的扩展工业温度范围。
图
1.
用于
AD2S1210 RDC
参考信号输出的高电流缓冲器(原理示意图,未显示去耦和所有连接)
Rev.0
Circuits from the Lab™ circuits from Analog Devices have been designed and built by Analog
Devices engineers. Standard engineering practices have been employed in the design and
construction of each circuit, and their function and performance have been tested and verified
in a lab environment at room temperature. However, you are solely responsible for testing the
circuit and determining its suitability and applicability for your use and application.
Accordingly, in no event shall Analog Devices be liable for direct, indirect, special, incidental,
consequential or punitive damages due to any cause whatsoever connected to the use of any
Circuits from the Lab circuits. (Continued on last page)
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700 www.analog.com/zh
Fax: 781.461.3113 ©2011 Analog Devices, Inc. All rights reserved.
评论5