is erased. Application programs require only a very minimum software interface to use the
AVRBL. The PC application to interface to the boot loader and more documentation about
interfacing to the boot loader are available free at http://www.prllc.com. (Some notes are
provided on the following pages.)
Other features of the development board include:
- Comes Standard with an ATMega128-16AC processor
- Comes programmed with a boot strap loader! No other programming
hardware is required! Just an RS232 cable to your PC and the AVRBL Boot
Loader Windows application.
- 10baseT Ethernet using the RealTek RTL8019AS NIC. RJ45 Jack on-board.
- Two RS232 ports with 9-Pin D-Shell as well as a jumper header for
convenient connection.
- Up to 128K of In-System Programmable FLASH memory with 4K of
EEPROM and 4K of Internal SRAM.
- Eight, 10 bit, Analog Inputs, using either internal or user supplied reference
- Nine I/O controlled LEDs, 8 of which are jumper selectable.
- A PCF8563 Real-Time-Clock IC with a 32KHz watch crystal for on-board
Real-Time operations. Battery backed with a 3V lithium coin cell.
- 32K of external SRAM.
- A universal clock socket allows for canned oscillators, as well as a variety
of crystals, ceramic resonators, and passive terminations. A 14.7456Mhz
oscillator comes standard with the unit, providing accurate baud rates across
a wide range.
- A single-in-line Optrex® compatible LCD connector.
- 0.1” centered headers provide for simple connection to the processor special
function pins and I/O.
- 10-pin, polarized, ISP and JTAG connections are provided for in-system
programming and debugging. Mega128s can also be programmed through
either RS232 port when using an appropriate boot loader application.
- On-board switch-mode regulation allows for power inputs from 8-38VDC
with an LED power indicator.
- Termination is provided for 5VDC output at for up to 2A of combined load.