/*
* QEMU USB HUB emulation
*
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "qemu-common.h"
#include "usb.h"
//#define DEBUG
#define MAX_PORTS 8
typedef struct USBHubPort {
USBPort port;
uint16_t wPortStatus;
uint16_t wPortChange;
} USBHubPort;
typedef struct USBHubState {
USBDevice dev;
int nb_ports;
USBHubPort ports[MAX_PORTS];
} USBHubState;
#define ClearHubFeature (0x2000 | USB_REQ_CLEAR_FEATURE)
#define ClearPortFeature (0x2300 | USB_REQ_CLEAR_FEATURE)
#define GetHubDescriptor (0xa000 | USB_REQ_GET_DESCRIPTOR)
#define GetHubStatus (0xa000 | USB_REQ_GET_STATUS)
#define GetPortStatus (0xa300 | USB_REQ_GET_STATUS)
#define SetHubFeature (0x2000 | USB_REQ_SET_FEATURE)
#define SetPortFeature (0x2300 | USB_REQ_SET_FEATURE)
#define PORT_STAT_CONNECTION 0x0001
#define PORT_STAT_ENABLE 0x0002
#define PORT_STAT_SUSPEND 0x0004
#define PORT_STAT_OVERCURRENT 0x0008
#define PORT_STAT_RESET 0x0010
#define PORT_STAT_POWER 0x0100
#define PORT_STAT_LOW_SPEED 0x0200
#define PORT_STAT_HIGH_SPEED 0x0400
#define PORT_STAT_TEST 0x0800
#define PORT_STAT_INDICATOR 0x1000
#define PORT_STAT_C_CONNECTION 0x0001
#define PORT_STAT_C_ENABLE 0x0002
#define PORT_STAT_C_SUSPEND 0x0004
#define PORT_STAT_C_OVERCURRENT 0x0008
#define PORT_STAT_C_RESET 0x0010
#define PORT_CONNECTION 0
#define PORT_ENABLE 1
#define PORT_SUSPEND 2
#define PORT_OVERCURRENT 3
#define PORT_RESET 4
#define PORT_POWER 8
#define PORT_LOWSPEED 9
#define PORT_HIGHSPEED 10
#define PORT_C_CONNECTION 16
#define PORT_C_ENABLE 17
#define PORT_C_SUSPEND 18
#define PORT_C_OVERCURRENT 19
#define PORT_C_RESET 20
#define PORT_TEST 21
#define PORT_INDICATOR 22
/* same as Linux kernel root hubs */
static const uint8_t qemu_hub_dev_descriptor[] = {
0x12, /* u8 bLength; */
0x01, /* u8 bDescriptorType; Device */
0x10, 0x01, /* u16 bcdUSB; v1.1 */
0x09, /* u8 bDeviceClass; HUB_CLASSCODE */
0x00, /* u8 bDeviceSubClass; */
0x00, /* u8 bDeviceProtocol; [ low/full speeds only ] */
0x08, /* u8 bMaxPacketSize0; 8 Bytes */
0x00, 0x00, /* u16 idVendor; */
0x00, 0x00, /* u16 idProduct; */
0x01, 0x01, /* u16 bcdDevice */
0x03, /* u8 iManufacturer; */
0x02, /* u8 iProduct; */
0x01, /* u8 iSerialNumber; */
0x01 /* u8 bNumConfigurations; */
};
/* XXX: patch interrupt size */
static const uint8_t qemu_hub_config_descriptor[] = {
/* one configuration */
0x09, /* u8 bLength; */
0x02, /* u8 bDescriptorType; Configuration */
0x19, 0x00, /* u16 wTotalLength; */
0x01, /* u8 bNumInterfaces; (1) */
0x01, /* u8 bConfigurationValue; */
0x00, /* u8 iConfiguration; */
0xc0, /* u8 bmAttributes;
Bit 7: must be set,
6: Self-powered,
5: Remote wakeup,
4..0: resvd */
0x00, /* u8 MaxPower; */
/* USB 1.1:
* USB 2.0, single TT organization (mandatory):
* one interface, protocol 0
*
* USB 2.0, multiple TT organization (optional):
* two interfaces, protocols 1 (like single TT)
* and 2 (multiple TT mode) ... config is
* sometimes settable
* NOT IMPLEMENTED
*/
/* one interface */
0x09, /* u8 if_bLength; */
0x04, /* u8 if_bDescriptorType; Interface */
0x00, /* u8 if_bInterfaceNumber; */
0x00, /* u8 if_bAlternateSetting; */
0x01, /* u8 if_bNumEndpoints; */
0x09, /* u8 if_bInterfaceClass; HUB_CLASSCODE */
0x00, /* u8 if_bInterfaceSubClass; */
0x00, /* u8 if_bInterfaceProtocol; [usb1.1 or single tt] */
0x00, /* u8 if_iInterface; */
/* one endpoint (status change endpoint) */
0x07, /* u8 ep_bLength; */
0x05, /* u8 ep_bDescriptorType; Endpoint */
0x81, /* u8 ep_bEndpointAddress; IN Endpoint 1 */
0x03, /* u8 ep_bmAttributes; Interrupt */
0x02, 0x00, /* u16 ep_wMaxPacketSize; 1 + (MAX_ROOT_PORTS / 8) */
0xff /* u8 ep_bInterval; (255ms -- usb 2.0 spec) */
};
static const uint8_t qemu_hub_hub_descriptor[] =
{
0x00, /* u8 bLength; patched in later */
0x29, /* u8 bDescriptorType; Hub-descriptor */
0x00, /* u8 bNbrPorts; (patched later) */
0x0a, /* u16 wHubCharacteristics; */
0x00, /* (per-port OC, no power switching) */
0x01, /* u8 bPwrOn2pwrGood; 2ms */
0x00 /* u8 bHubContrCurrent; 0 mA */
/* DeviceRemovable and PortPwrCtrlMask patched in later */
};
static void usb_hub_attach(USBPort *port1, USBDevice *dev)
{
USBHubState *s = port1->opaque;
USBHubPort *port = &s->ports[port1->index];
if (dev) {
if (port->port.dev)
usb_attach(port1, NULL);
port->wPortStatus |= PORT_STAT_CONNECTION;
port->wPortChange |= PORT_STAT_C_CONNECTION;
if (dev->speed == USB_SPEED_LOW)
port->wPortStatus |= PORT_STAT_LOW_SPEED;
else
port->wPortStatus &= ~PORT_STAT_LOW_SPEED;
port->port.dev = dev;
/* send the attach message */
usb_send_msg(dev, USB_MSG_ATTACH);
} else {
dev = port->port.dev;
if (dev) {
port->wPortStatus &= ~PORT_STAT_CONNECTION;
port->wPortChange |= PORT_STAT_C_CONNECTION;
if (port->wPortStatus & PORT_STAT_ENABLE) {
port->wPortStatus &= ~PORT_STAT_ENABLE;
port->wPortChange |= PORT_STAT_C_ENABLE;
}
/* send the detach message */
usb_send_msg(dev, USB_MSG_DETACH);
port->port.dev = NULL;
}
}
}
static void usb_hub_handle_reset(USBDevice *dev)
{
/* XXX: do it */
}
static int usb_hub_handle_control(USBDevice *dev, int request, int value,
int index, int length, uint8_t *data)
{
USBHubState *s = (USBHubState *)dev;
int ret;
switch(request) {
case DeviceRequest | USB_REQ_GET_STATUS:
data[0] = (1 << USB_DEVICE_SELF_POWERED) |
(dev->remote_wakeup << USB_DEVICE_REMOTE_WAKEUP);
data[1] = 0x00;
ret = 2;
break;
case DeviceOutRequest | USB_REQ_CLEAR_FEATURE:
if (value == USB_DEVICE_REMOTE_WAKEUP) {
dev->remote_wakeup = 0;
} else {
goto fail;
}
ret = 0;
break;
case EndpointOutRequest | USB_REQ_CLEAR_FEATURE:
if (value == 0 && index != 0x81) { /* clear ep halt */
goto fail;
}
ret = 0;
break;
case DeviceOutRequest | USB_REQ_SET_FEATURE:
if (value == USB_DEVICE_REMOTE_WAKEUP) {
dev->remote_wakeup = 1;
} else {
goto fail;
}
ret = 0;
break;
case DeviceOutRequest | USB_REQ_SET_ADDRESS:
dev->addr = value;
ret = 0;
break;
case DeviceRequest | USB_REQ_GET_DESCRIPTOR:
switch(value >> 8) {
case USB_DT_DEVICE: