/**
******************************************************************************
* @file stm32f10x_tim.c
* @author MCD Application Team
* @version V3.5.0
* @date 11-March-2011
* @brief This file provides all the TIM firmware functions.
******************************************************************************
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "stm32f10x_tim.h"
#include "stm32f10x_rcc.h"
/** @addtogroup STM32F10x_StdPeriph_Driver
* @{
*/
/** @defgroup TIM
* @brief TIM driver modules
* @{
*/
/** @defgroup TIM_Private_TypesDefinitions
* @{
*/
/**
* @}
*/
/** @defgroup TIM_Private_Defines
* @{
*/
/* ---------------------- TIM registers bit mask ------------------------ */
#define SMCR_ETR_Mask ((uint16_t)0x00FF)
#define CCMR_Offset ((uint16_t)0x0018)
#define CCER_CCE_Set ((uint16_t)0x0001)
#define CCER_CCNE_Set ((uint16_t)0x0004)
/**
* @}
*/
/** @defgroup TIM_Private_Macros
* @{
*/
/**
* @}
*/
/** @defgroup TIM_Private_Variables
* @{
*/
/**
* @}
*/
/** @defgroup TIM_Private_FunctionPrototypes
* @{
*/
static void TI1_Config(TIM_TypeDef* TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection,
uint16_t TIM_ICFilter);
static void TI2_Config(TIM_TypeDef* TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection,
uint16_t TIM_ICFilter);
static void TI3_Config(TIM_TypeDef* TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection,
uint16_t TIM_ICFilter);
static void TI4_Config(TIM_TypeDef* TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection,
uint16_t TIM_ICFilter);
/**
* @}
*/
/** @defgroup TIM_Private_Macros
* @{
*/
/**
* @}
*/
/** @defgroup TIM_Private_Variables
* @{
*/
/**
* @}
*/
/** @defgroup TIM_Private_FunctionPrototypes
* @{
*/
/**
* @}
*/
/** @defgroup TIM_Private_Functions
* @{
*/
/**
* @brief Deinitializes the TIMx peripheral registers to their default reset values.
* @param TIMx: where x can be 1 to 17 to select the TIM peripheral.
* @retval None
*/
void TIM_DeInit(TIM_TypeDef* TIMx)
{
/* Check the parameters */
assert_param(IS_TIM_ALL_PERIPH(TIMx));
if (TIMx == TIM1)
{
RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM1, ENABLE);
RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM1, DISABLE);
}
else if (TIMx == TIM2)
{
RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM2, ENABLE);
RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM2, DISABLE);
}
else if (TIMx == TIM3)
{
RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM3, ENABLE);
RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM3, DISABLE);
}
else if (TIMx == TIM4)
{
RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM4, ENABLE);
RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM4, DISABLE);
}
else if (TIMx == TIM5)
{
RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM5, ENABLE);
RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM5, DISABLE);
}
else if (TIMx == TIM6)
{
RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM6, ENABLE);
RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM6, DISABLE);
}
else if (TIMx == TIM7)
{
RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM7, ENABLE);
RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM7, DISABLE);
}
else if (TIMx == TIM8)
{
RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM8, ENABLE);
RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM8, DISABLE);
}
else if (TIMx == TIM9)
{
RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM9, ENABLE);
RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM9, DISABLE);
}
else if (TIMx == TIM10)
{
RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM10, ENABLE);
RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM10, DISABLE);
}
else if (TIMx == TIM11)
{
RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM11, ENABLE);
RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM11, DISABLE);
}
else if (TIMx == TIM12)
{
RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM12, ENABLE);
RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM12, DISABLE);
}
else if (TIMx == TIM13)
{
RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM13, ENABLE);
RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM13, DISABLE);
}
else if (TIMx == TIM14)
{
RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM14, ENABLE);
RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM14, DISABLE);
}
else if (TIMx == TIM15)
{
RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM15, ENABLE);
RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM15, DISABLE);
}
else if (TIMx == TIM16)
{
RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM16, ENABLE);
RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM16, DISABLE);
}
else
{
if (TIMx == TIM17)
{
RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM17, ENABLE);
RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM17, DISABLE);
}
}
}
/**
* @brief Initializes the TIMx Time Base Unit peripheral according to
* the specified parameters in the TIM_TimeBaseInitStruct.
* @param TIMx: where x can be 1 to 17 to select the TIM peripheral.
* @param TIM_TimeBaseInitStruct: pointer to a TIM_TimeBaseInitTypeDef
* structure that contains the configuration information for the
* specified TIM peripheral.
* @retval None
*/
void TIM_TimeBaseInit(TIM_TypeDef* TIMx, TIM_TimeBaseInitTypeDef* TIM_TimeBaseInitStruct)
{
uint16_t tmpcr1 = 0;
/* Check the parameters */
assert_param(IS_TIM_ALL_PERIPH(TIMx));
assert_param(IS_TIM_COUNTER_MODE(TIM_TimeBaseInitStruct->TIM_CounterMode));
assert_param(IS_TIM_CKD_DIV(TIM_TimeBaseInitStruct->TIM_ClockDivision));
tmpcr1 = TIMx->CR1;
if((TIMx == TIM1) || (TIMx == TIM8)|| (TIMx == TIM2) || (TIMx == TIM3)||
(TIMx == TIM4) || (TIMx == TIM5))
{
/* Select the Counter Mode */
tmpcr1 &= (uint16_t)(~((uint16_t)(TIM_CR1_DIR | TIM_CR1_CMS)));
tmpcr1 |= (uint32_t)TIM_TimeBaseInitStruct->TIM_CounterMode;
}
if((TIMx != TIM6) && (TIMx != TIM7))
{
/* Set the clock division */
tmpcr1 &= (uint16_t)(~((uint16_t)TIM_CR1_CKD));
tmpcr1 |= (uint32_t)TIM_TimeBaseInitStruct->TIM_ClockDivision;
}
TIMx->CR1 = tmpcr1;
/* Set the Autoreload value */
TIMx->ARR = TIM_TimeBaseInitStruct->TIM_Period ;
/* Set the Prescaler value */
TIMx->PSC = TIM_TimeBaseInitStruct->TIM_Prescaler;
if ((TIMx == TIM1) || (TIMx == TIM8)|| (TIMx == TIM15)|| (TIMx == TIM16) || (TIMx == TIM17))
{
/* Set the Repetition Counter value */
TIMx->RCR = TIM_TimeBaseInitStruct->TIM_RepetitionCounter;
}
/* Generate an update event to reload the Prescaler and the Repetition counter
values immediately */
TIMx->EGR = TIM_PSCReloadMode_Immediate;
}
/**
* @brief Initializes the TIMx Channel1 according to the specified
* parameters in the TIM_OCInitStruct.
* @param TIMx: where x can be 1 to 17 except 6 and 7 to select the TIM peripheral.
* @param TIM_OCInitStru
没有合适的资源?快使用搜索试试~ 我知道了~
温馨提示
1、嵌入式物联网单片机项目开发实战。例程经过精心编写,简单好用。 2、代码使用KEIL 标准库开发,当前在STM32F103运行,如果是STM32F103其他型号芯片,依然适用,请自行更改KEIL芯片型号以及FLASH容量即可。 3、软件下载时,请注意keil选择项是jlink还是stlink。 4、技术v:349014857; 5、如果接入其他传感器,请查看发布的其他资料。 6、单片机与模块的接线,在代码当中均有定义,请自行对照。 7、若硬件差异,请根据自身情况适当调整代码,程序仅供参考。
资源推荐
资源详情
资源评论
收起资源包目录
STM32F103单片机开发例程-ucos操作系统创建多个任务点亮多个发光二极管程序代码.rar (94个子文件)
STM32F103单片机开发例程-ucos操作系统创建多个任务点亮多个发光二极管程序代码
程序
System
system_stm32f10x.c 36KB
core_cm3.h 84KB
core_cm3.c 17KB
stm32f10x.h 619KB
system_stm32f10x.h 2KB
LY-STM32.Opt 5KB
Lib
inc
stm32f10x_bkp.h 7KB
stm32f10x_conf.h 3KB
stm32f10x_sdio.h 21KB
stm32f10x_dbgmcu.h 4KB
misc.h 9KB
stm32f10x_cec.h 6KB
stm32f10x_can.h 27KB
stm32f10x_fsmc.h 26KB
stm32f10x_spi.h 17KB
stm32f10x_wwdg.h 3KB
stm32f10x_dma.h 20KB
stm32f10x_exti.h 7KB
stm32f10x_tim.h 51KB
stm32f10x_crc.h 2KB
stm32f10x_rtc.h 4KB
stm32f10x_usart.h 16KB
stm32f10x_rcc.h 30KB
stm32f10x_dac.h 15KB
stm32f10x_adc.h 21KB
stm32f10x_i2c.h 29KB
stm32f10x_gpio.h 20KB
stm32f10x_pwr.h 4KB
stm32f10x_flash.h 25KB
stm32f10x_iwdg.h 4KB
SRC
stm32f10x_adc.c 46KB
stm32f10x_wwdg.c 6KB
misc.c 7KB
stm32f10x_spi.c 30KB
system_stm32f10x.c 24KB
stm32f10x_gpio.c 21KB
stm32f10x_tim.c 107KB
stm32f10x_sdio.c 28KB
stm32f10x_bkp.c 8KB
stm32f10x_rtc.c 8KB
stm32f10x_dac.c 19KB
stm32f10x_dma.c 29KB
stm32f10x_fsmc.c 35KB
stm32f10x_exti.c 7KB
stm32f10x_pwr.c 9KB
stm32f10x_i2c.c 45KB
stm32f10x_crc.c 3KB
stm32f10x_cec.c 11KB
stm32f10x_can.c 44KB
stm32f10x_iwdg.c 5KB
stm32f10x_usart.c 37KB
stm32f10x_dbgmcu.c 5KB
stm32f10x_flash.c 61KB
stm32f10x_rcc.c 50KB
LY-STM32.hex 36KB
LY-STM32.Uv2 4KB
ASM
startup_stm32f10x_cl.s 15KB
startup_stm32f10x_ld_vl.s 13KB
startup_stm32f10x_hd.s 15KB
stm32f10x_startup.s 9KB
cortexm3_macro.s 10KB
startup_stm32f10x_md.s 12KB
startup_stm32f10x_ld.s 12KB
startup_stm32f10x_md_vl.s 14KB
startup_stm32f10x_xl.s 16KB
os_cpu_a._ia 145B
USR
led.h 482B
led.c 1KB
main.c 3KB
pbdata.c 2KB
stm32f10x_it.c 4KB
stm32f10x_it.h 4KB
pbdata.h 251B
UCOSII
CORE
os_core.c 86KB
os_mutex.c 37KB
os_mbox.c 30KB
os_time.c 11KB
ucos_ii.h 78KB
os_flag.c 55KB
ucos_ii.c 2KB
os_sem.c 29KB
os_q.c 42KB
os_task.c 56KB
os_mem.c 19KB
os_tmr.c 44KB
PORT
os_cpu_c.c 12KB
os_cpu_a.asm 7KB
os_cpu.h 3KB
os_dbg.c 12KB
os_dbg_r.c 13KB
CONFIG
os_cfg.h 10KB
includes.h 570B
重置KEIL编译.bat 440B
技术答疑.url 121B
共 94 条
- 1
资源评论
物联技术666
- 粉丝: 2795
- 资源: 839
上传资源 快速赚钱
- 我的内容管理 展开
- 我的资源 快来上传第一个资源
- 我的收益 登录查看自己的收益
- 我的积分 登录查看自己的积分
- 我的C币 登录后查看C币余额
- 我的收藏
- 我的下载
- 下载帮助
最新资源
- n.cpp
- jdk-8u411-windows-x64下载安装可用
- vgg模型-图像分类算法对水果识别-不含数据集图片-含逐行注释和说明文档.zip
- KMP算法(Knuth-Morris-Pratt算法
- vgg模型-python语言pytorch框架训练识别化妆品分类-不含数据集图片-含逐行注释和说明文档.zip
- KMP算法(Knuth-Morris-Pratt算法
- shufflenet模型-基于人工智能的卷积网络训练识别狗的表情-不含数据集图片-含逐行注释和说明文档.zip
- shufflenet模型-python语言pytorch框架训练识别张嘴闭嘴-不含数据集图片-含逐行注释和说明文档.zip
- resnet模型-基于人工智能的卷积网络训练识别面部表情识别-不含数据集图片-含逐行注释和说明文档
- resnet模型-python语言pytorch框架训练识别香蕉品质-不含数据集图片-含逐行注释和说明文档.zip
资源上传下载、课程学习等过程中有任何疑问或建议,欢迎提出宝贵意见哦~我们会及时处理!
点击此处反馈
安全验证
文档复制为VIP权益,开通VIP直接复制
信息提交成功