没有合适的资源?快使用搜索试试~ 我知道了~
施耐德ATV66变频器说明书.pdf
需积分: 24 2 下载量 64 浏览量
2019-09-26
03:23:48
上传
评论
收藏 957KB PDF 举报
温馨提示
试读
75页
施耐德ATV66变频器说明书pdf,施耐德ATV66变频器说明书
资源推荐
资源详情
资源评论
Altivar 66
Telemecanique
speed controllers
for asynchronous motors
Constant / variable torque :
2.2 to 250 kW, 400 V
Constant / variable torque :
3 to 400 HP, 460 V
Constant / variable torque :
2.2/3 to 30/37 kW, 230 V
Constant / variable torque :
3/5 to 40/50 HP, 230 V
Configuration and adjustment via the terminal
Programming manual
■ Merlin Gerin ■ Square D ■ Telemecanique
CAUTION
This document relates to the graphic terminal on
the Altivar 66 with no added options.
Some modes or menus may be modified if the
speed controller has been fitted with one or more
options.
Any such modifications are indicated in the
accompanying documentation.
For instructions on how to install, connect and
start the Altivar, refer to the User's Manual.
1
Contents
Introduction 2 and 3
Principle of access to menus 4
Principle of access in the Main menu 5
Contents of the Main menu 6 and 7
Switch in locked position
Displays on initial power-up 8
Reading the Main menu 9
Display mode during operation 10 and 11
Switch unlocked : partial unlock
Initial power-up : modifying configuration 12 and 13
Review of settings 14 and 15
Total unlock
Access procedure 16
Display configuration 17 and 18
Keypad configuration 19 and 20
General configuration 21 and 22
Drive parameters 23
Motor parameters 24 to 28
Control parameters 29 to 31
Application functions 32 to 57
Output assignment 58 and 59
Fault management 60 to 64
Diagnostic mode 65 and 66
Drive initialization 67 and 68
Memorization configuration and setting 69 to 72
P4
P1
P3
P6P6
2
.
F 1 F 2 F 3
789
456
123
0
•
ESC
ENT
RUN STOP
Introduction
Altivar 66 has a removable graphic terminal (keypad) on the front panel.
This graphic terminal is used to :
– Display (in plain language) the speed controller identification, operating parameters or faults.
– Modify the settings and configuration of the Altivar.
– Select local control mode using the keypad.
Front view
Liquid crystal graphic display (128 x 64 points, with 6
lines of 21 characters) which displays bargraphs
during operation, with reverse video to highlight text
or a numerical value.
Keypad with 20 keys
1 ENT (enter) key
1 ESC (escape) key
2 direction keys ▲ ▼
11 numerical keys (0 to 9 and the decimal •)
3 function keys F1, F2, F3
2 RUN and STOP keys under a removable protective
cover
Use
ENT key : – go to next menu,
– confirm a selection or setting.
ESC key : – return to previous menu,
– abandon current setting and return to its original value.
▲ ▼ keys : – scroll through and select from menus,
– set a value (in + – mode),
– select a function.
Numerical keys : enter or set a value.
F1, F2, F3 keys : can be assigned for local control mode. In programming mode, F1 accesses the
help menu, F2 returns to Display mode, and F3 provides direct access to a menu
or a mode selected by its number.
The RUN and STOP keys are used in local control mode of the speed controller, independently
of the inputs : starting and stopping the motor on a ramp, if local control mode is selected.
If local control mode has not been selected, the STOP key remains active, and the motor stops
following the deceleration ramp.
3
Introduction
Rear view (with graphic terminal removed)
9-pin SUB-D connector for connection to the speed
controller.
For remote operation, the graphic terminal can be
connected by a cable, supplied separately :
– length 3 metres, reference VW3-A66311,
– length 2 metres, reference VW3-A66312.
Access switch to limit access to programming functions
(modify settings and configuration, select local control
mode).
Removing the graphic terminal
Unscrew Remove
Access to RUN and STOP keys
For ease of access, it is advisable to remove the
graphic terminal.
.
剩余74页未读,继续阅读
资源评论
weixin_38744153
- 粉丝: 346
- 资源: 2万+
上传资源 快速赚钱
- 我的内容管理 展开
- 我的资源 快来上传第一个资源
- 我的收益 登录查看自己的收益
- 我的积分 登录查看自己的积分
- 我的C币 登录后查看C币余额
- 我的收藏
- 我的下载
- 下载帮助
安全验证
文档复制为VIP权益,开通VIP直接复制
信息提交成功