没有合适的资源?快使用搜索试试~ 我知道了~
1.在基于 IOS 的交换机上设置主机名 2.在基于 IOS 的交换机上设置登录口令 3.在基于 IOS 的交换机上设置远程访问 4.在基于 IOS 的交换机上
资源详情
资源评论
资源推荐
思科交换机配置命令大全
switch> 用户模式
1:进入特权模式 enable
switch> enable
switch#
2:进入全局配置模式 configure terminal
switch> enable
switch #c onfigure terminal
switch(conf)#
3:交换机命名 hostname aptech2950 以 aptech2950 为例
switch> enable
switch #c onfigure terminal
switch(conf)#hostname aptch-2950
aptech2950(conf)#
4:配置使能口令 enable password cisco 以 cisco 为例
switch> enable
switch #c onfigure terminal
switch(conf)#hostname aptch2950
aptech2950(conf)# enable password cisco
5:配置使能密码 enable secret ciscolab 以 cicsolab 为例
switch> enable
switch #c onfigure terminal
switch(conf)#hostname aptch2950
aptech2950(conf)# enable secretciscolab
6:设置虚拟局域网 vlan 1 interface vlan 1
switch> enable
switch #c onfigure terminal
switch(conf)#hostname aptch2950
aptech2950(conf)# interface vlan 1
aptech2950(conf-if)#ip address192.168.1.1 255.255.255.0 配置交换机端口 ip 和子网掩
码
aptech2950(conf-if)#no shut 是配置处于运行中
aptech2950(conf-if)#exit
aptech2950(conf)#ip default-gateway 192.168.254 设置网关地址
7:进入交换机某一端口 interface fastehernet 0/17 以 17 端口为例
switch> enable
switch #c onfigure terminal
switch(conf)#hostname aptch2950
aptech2950(conf)# interface fastehernet0/17
aptech2950(conf-if)#
8:查看命令 show
switch> enable
switch# show version 察看系统中的所有版本信息
show interface vlan 1 查看交换机有关 ip 协议的配置信息
show running-configure 查看交换机当前起作用的配置信息
show interface fastethernet 0/1 察看交换机 1 接口具体配置和统计信息
show mac-address-table 查看 mac 地址表
show mac-address-table aging-time 查看 mac 地址表自动老化时间
9:交换机恢复出厂默认恢复命令
switch> enable
switch# erasestartup-configure
switch# reload
10:双工模式设置
switch> enable
switch #c onfigure terminal
switch2950(conf)#hostname aptch-2950
aptech2950(conf)# interface fastehernet0/17 以 17 端口为例
aptech2950(conf-if)#duplex full/half/auto 有 full , half, auto 三个可选
项
11: cdp 相关命令
switch> enable
switch# show cdp 查看设备的 cdp 全局配置信息
show cdp interface fastethernet 0/17 查看 17 端口的 cdp 配置信息
show cdp traffic 查看有关 cdp 包的统计信息
show cdp nerghbors 列出与设备相连的 cisco 设备
12: csico2950 的密码恢复
拔下交换机电源线。
用手按着交换机的 MODE 键,插上电源线
在 switch :后执行 flash_ini 命令: switch: flash_ini
查看 flash 中的文件: switch: dir flash:
把“ config.text ”文件改名为“ config.old ”: switch: rename flash: config.text flash: config.old
执行 boot: switch: boot
交换机进入是否进入配置的对话,执行 no :
进入特权模式察看 flash 里的文件: show flash :
把“config.old ”文件改名为“ config.text ”: switch: rename flash: config.old flash: config.text
把 “ config.text ” 拷 入 系 统 的 “ running-configure ”: copy flash: config.text system :
running-configure
把配置模式重新设置密码存盘,密码恢复成功。
13:交换机 telnet 远程登录设置:
switch>en
switch #c onfigure terminal
switch(conf)#hostname aptech-2950
aptech2950(conf)#enable password cisco 以 cisco 为特权模式密码
aptech2950(conf)#interface fastethernet 0/1 以 17 端口为 telnet 远程登录端口
aptech2950(conf-if)#ip address192.168.1.1 255.255.255.0
aptech2950(conf-if)#no shut
aptech2950(conf-if)#exit
aptech2950(conf)line vty 0 4 设置 0-4 个用户可以 telnet 远程登陆
aptech2950(conf-line)#login
aptech2950(conf-line)#password edge 以 edge 为远程登录的用户密码
主机设置:
ip 192.168.1.2 主机的 ip 必须和交换机端口的地址在同一网络
段
netmask 255.255.255.0
gate-way 192.168.1.1 网关地址是交换机端口地址
运行:
telnet 192.168.1.1
进入 telnet 远程登录界面
password : edge
aptech2950>en
password: cisco
aptech#
14:交换机配置的重新载入和保存
设置完成交换机的配置后:
aptech2950(conf)#reload
是否保存( y/n) y: 保存设置信息 n:不保存设置信息
1.在基于 IOS 的交换机上设置主机名 /系统名 :
switch(config)# hostname hostname
在基于 CLI 的交换机上设置主机名 /系统名 :
switch(enable) set system name name-string
2.在基于 IOS 的交换机上设置登录口令 :
switch(config)# enablepassword level 1 password
剩余12页未读,继续阅读
点墨楼
- 粉丝: 32
- 资源: 281
上传资源 快速赚钱
- 我的内容管理 展开
- 我的资源 快来上传第一个资源
- 我的收益 登录查看自己的收益
- 我的积分 登录查看自己的积分
- 我的C币 登录后查看C币余额
- 我的收藏
- 我的下载
- 下载帮助
最新资源
- #P0015. 全排列 超级简单
- pta题库答案c语言之排序4统计工龄.zip
- pta题库答案c语言之树结构7堆中的路径.zip
- pta题库答案c语言之树结构3TreeTraversalsAgain.zip
- pta题库答案c语言之树结构2ListLeaves.zip
- pta题库答案c语言之树结构1树的同构.zip
- 基于C++实现民航飞行与地图简易管理系统可执行程序+说明+详细注释.zip
- pta题库答案c语言之复杂度1最大子列和问题.zip
- 三维装箱问题(Three-Dimensional Bin Packing Problem,3D-BPP)是一个经典的组合优化问题
- 以下是一些关于Linux线程同步的基本概念和方法.txt
资源上传下载、课程学习等过程中有任何疑问或建议,欢迎提出宝贵意见哦~我们会及时处理!
点击此处反馈
安全验证
文档复制为VIP权益,开通VIP直接复制
信息提交成功
评论0