*** Commands:
Show Help Menu: -H
Show Examples: -EG
Show Current Settings: -SC
Download Hex File: -DL <FileName> + DL Options
Execute command: -EX + EX Options
** DL Options:
-M <Execution Number> = Code execution start location
0 = FLASH 1 = XRAM
-BM <Option Number> = Change BMI
0 = User Mode (Productive), disable peripherals, 8 MHz clock
1 = User Mode (Productive), enable peripheral, 8 MHz clock
2 = User Mode (Productive), disable peripheral, 24 MHz clock
3 = User Mode (Productive), enable peripheral, 24 MHz clock
4 = ALT User Mode, disable peripherals, 8 MHz clock
5 = ALT User Mode, enable peripheral, 8 MHz clock
6 = ALT User Mode, disable peripheral, 24 MHz clock
7 = ALT User Mode, enable peripheral, 24 MHz clock
8 = OCDS Mode, SPD 0, disable peripherals, 8 MHz clock
9 = OCDS Mode, SPD 0, enable peripheral, 8 MHz clock
10 = OCDS Mode, SPD 0, disable peripheral, 24 MHz clock
11 = OCDS Mode, SPD 0, enable peripheral, 24 MHz clock
Options 12 to 15 for SPD 1 and Options 16 to 19 for SPD 2
20 = User Mode (Diagnostic), SPD 0, disable peripherals, 8 MHz clock
21 = User Mode (Diagnostic), SPD 0, enable peripheral, 8 MHz clock
22 = User Mode (Diagnostic), SPD 0, disable peripheral, 24 MHz clock
23 = User Mode (Diagnostic), SPD 0, enable peripheral, 24 MHz clock
Options 24 to 27 for SPD 1 and Options 28 to 31 for SPD 2
32 = UART BSL Mode, disable peripherals, 8 MHz clock
33 = UART BSL Mode, enable peripheral, 8 MHz clock
34 = UART BSL Mode, disable peripheral, 24 MHz clock
35 = UART BSL Mode, enable peripheral, 24 MHz clock
-PW <1/2 byte(s) Hex value> = Protect device with 1 byte or 2 bytes (only for XC878 or XC858) Hex Number
-SA <Download Location Number> = Download the shared address content into XRAM
or DFlash (only for XC878/858(L)-16FF)
0 = DLASH 1 = XRAM
-NM = No Message Box will be shown. Status can be check in cmdline.txt.
** EX Options (select between -M, -BM or -PW):
-M <Execution Number> = Code execution start location
0 = FLASH 1 = XRAM
-BM <Option Number> = Change BMI
Refer to above (-DL option) for Option Number
-PW <1/2 byte(s) Hex value> = Protect device with 1 byte or 2 bytes (only for XC878 and XC858) Hex Number
-NM = No Message Box will be shown. Status can be check in cmdline.txt.