/*************************************************************************/
TSM_INST.TXT
TURBO ASSEMBLER 5.0
This file contains details on how to install the TASM 5.0 package.
--------------------------------------------------------------------
TABLE OF CONTENTS
SECTION 1 System Requirements - Full Installation
SECTION 2 Installing TASM 5.0
A) Pre-Installation Notes
1) Backup Disks
2) Disk Compressions
4) Network Installation
B) Where to install
C) Installation Instructions
D) After Installation
SECTION 3 Minimum and Selected Installation Options
SECTION 4 Troubleshooting - Install Issues
A) Data Integrity or Bad Section Errors
B) Disk Full or Insufficient Disk Space
Errors
C) GP Fault or Unhandled Exception Errors
SECTION 5 Troubleshooting - Run Time Problems
A) Out of Memory Errors
B) GP Fault or Unhandled Exception Errors
C) Turbo Debugger for Windows
SECTION 6 Icons in the TASM Group Window
A) Creating a Program Group Window for TASM
B) List of Icons and Executable Files
SECTION 7 Using TASM from Windows
SECTION 8 How to Get A Technical Information Document
A) From TechFax
B) From Bulletin Boards
SECTION 9 Boot Clean
--------------------------------------------------------------------
SEARCH INSTRUCTIONS: To go directly to a specific
section, use your editor's search utility and search on
"SECTION -#-" replacing the # with the appropriate section
number.
SECTION -1- SYSTEM REQUIREMENTS
================================
Before installing TASM please review the minimum
system requirements listed below:
System requirements for a generic full installation
(both 16- and 32-bit installation):
8 MB system memory (req. to run Win32)
Intel 386 or higher
DOS 5.01 or later
Windows 3.1 or later (to access Turbo Assembler help file)
Windows '95 or Windows NT (for targeting those environments)
Approximately 10 MB hard disk space
3.5" High Density Disk Drive
Generally, you should use a host environment with a capability that is
equal to or greater than capability of the system you plan to target.
For example, if you are building 32-bit applications for Windows 95 or
Windows NT, you should use TD32 in a Win32 environment.
NOTE: On a compressed hard disk the installation process
might need additional hard disk space. If you are using
a disk compression utility, refer to Section 2, part A.
SECTION -2- INSTALLING TASM 5.0
================================
A) Pre-Installation Notes
-------------------------
1) Backup Disks
If you wish to make backup copies of your original disks
use the DOS DISKCOPY command. You must use the same disk
size and media (density) when you make your backup set of
disks. Attempting to copy from 3.5" to 5.25" will cause
the install program to fail. If you have a bad disk
contact Borland's Disk Replacement line at (800) 621-3132.
2) Disk Compression
If you are using a disk compression utility (such as
Stacker[tm], DoubleSpace[tm], XtraDrive[tm],
SuperStor[tm], etc.) the estimated available hard disk
space reported might not be sufficient to install the
product. During installation, TASM 5.0 copies compressed
files onto your hard disk. Disk compression utilities
report available hard disk space assuming that the files
copied onto the disk can be compressed. Since the files
that are copied by the installation program are already
compressed, the disk compression utility cannot compress
them any further. To solve this, you might need to free
additional hard disk space for the installation.
3) Network Installation
If you are installing TASM 5.0 on a network, you may wish
to consult Technical Information Document number 1738. For
information on how to receive this document, refer to
Section 10.
B) Where to Install:
--------------------
This product is designed to be used as a standalone product or in
conjunction with Delphi 2.0 or Borland C++ 5.0. It can also be used
with Borland/Turbo C++ 4.x, Borland Pascal 7 or Delphi 1.0. If you are
using Turbo Assembler 5.0 in conjunction with any of these Borland
compilers, you can install Turbo Assembler atop the same directory
heirarchy as your other Borland Tools.
If you use Turbo Assembler 5.0 with any other Borland development tools or
versions, then it is best to install Turbo Assembler to a unique
directory, such as c:\tasm. Both tool sets should be referenced in your
dos path with the most recent version being first in the path. For custom
configuration requirements, please contact Technical Support.
C) Installation Instructions:
-----------------------------
1. Boot Clean
It is highly recommended that you boot clean before
installing TASM 5.0. Booting your system with a clean
configuration will eliminate any potential software
conflicts that might arise during installation. Refer to
Section 10 for instructions on how to boot clean.
2. Insert the TASM 5.0 installation disk into drive A or B.
3. From the DOS prompt type A:INSTALL (or B:INSTALL)
and press <ENTER>. Do not install from a Windows DOS prompt.
4. Select installation options from the install menu. See
Section 3 for more details on the installation instructions.
5. Choose START INSTALLATION to begin installation. If problems
occur during installation, note any error messages and refer to
Section 5.
D) After Installation:
----------------------
1. After the install has completed, the README file appears.
The README file contains important information about
configuring and using TASM 5.0, including late changes
which might have occurred after the manuals were printed.
2. Modify your CONFIG.SYS so that files and buffers are set
to at least 40. For example:
FILES=40
BUFFERS=40
Also modify your AUTOEXEC.BAT file by adding to your path
statement the TASM 5.0 bin directory. For example:
PATH C:\TASM\BIN;C:\;C:\DOS;C:\WINDOWS
3. If you are installing Delphi 1.0, or Borland C++ 4.x AFTER
Turbo Assembler 5.0 has been installed, you will have to manually
change the system settings that allow these products to coexist:
In your system.ini file, check your [386Enh] section for multiple
entries for the device TDDEBUG.386. Remove duplicate entries of
TDDEBUG.386 so that only the version from this product is loaded.
On disk, you may also want to rename or remove the BP7 or BC4.x
versions of TDDEBUG.386 and TDWINTH.DLL to avoid their accidental
loading. You must restart Windows after making changes to system.ini.
4. Changes to SYSTEM.INI file:
Presuming you have installed Turbo Assembler and Tools to "c:\tasm",
The install program makes these changes to the SYSTEM.INI file:
1) Adds "device=c:\tasm\bin\windpmi.386" to support our 32-bit tools.
2) Adds "device=c:\tasm\bin\tddebug.386" to support our debugger.
5. Configuring the Windows NT command prompt:
To run 16-bit protected-mode programs (tlink) under an NT command
prompt you need to add the following line to CONFIG.NT:
ntcmdprompt
Under the default NT command-line prompt, DOS COMMAND.COM is run
after returning from a TSR (such as RTM.EXE which bcc and tlink load).
Adding the above line will cause the original NT CMD.EXE to be run.
SECTION -3- MINIMUM AND SELECTIVE INSTALLATION OPTIONS
=======================================================
This sec
没有合适的资源?快使用搜索试试~ 我知道了~
TASM5.0.zip
共36个文件
pak:25个
txt:3个
dsk:3个
1星 需积分: 12 7 下载量 31 浏览量
2015-10-19
11:57:38
上传
评论
收藏 4.1MB ZIP 举报
温馨提示
Borland公司开发的汇编编译器,被广泛用于Turbo C,Quick Basic等编译器,用作中间过渡编译。它也能独立的编译纯汇编或是Win32Asm的代码。具有编译快速,高效的特点,至今依然是汇编开发的首选利器
资源推荐
资源详情
资源评论
收起资源包目录
tasm5.0.zip (36个子文件)
UNPAK.EXE 25KB
CPUID.PAK 3KB
TASMDOC.PAK 88KB
TDDOS.PAK 504KB
SHOW87.PAK 19KB
README.COM 4KB
TA32LIB.PAK 91KB
FILELIST.TXT 13KB
TDCMD.PAK 181KB
FILT.PAK 29KB
INSTALL.EXE 42KB
WHEREIS.PAK 64KB
CMDINC.PAK 34KB
USRGUIDE.PAK 23KB
ALIASDOS.PAK 4KB
DISK3.DSK 5B
TDWIN.PAK 525KB
DISK1.DSK 5B
FILE_ID.DIZ 386B
CMD16.PAK 356KB
TA16LIB.PAK 39KB
HEAP.PAK 19KB
ASMWIN.PAK 9KB
DLLWIN.PAK 8KB
TSM_RDME.TXT 5KB
TSM_INST.TXT 24KB
TD32.PAK 447KB
WAP.PAK 3KB
GROUPS.PAK 4KB
CMD32.PAK 370KB
DISK2.DSK 5B
PCHome_download.html 784B
ALIASWIN.PAK 6KB
THUNK95.PAK 14KB
CMDLINE.PAK 1.25MB
WAP32.PAK 7KB
共 36 条
- 1
资源评论
- darren_Smith2017-05-03Windows10根本不能安装.........
u010177627
- 粉丝: 0
- 资源: 5
上传资源 快速赚钱
- 我的内容管理 展开
- 我的资源 快来上传第一个资源
- 我的收益 登录查看自己的收益
- 我的积分 登录查看自己的积分
- 我的C币 登录后查看C币余额
- 我的收藏
- 我的下载
- 下载帮助
最新资源
资源上传下载、课程学习等过程中有任何疑问或建议,欢迎提出宝贵意见哦~我们会及时处理!
点击此处反馈
安全验证
文档复制为VIP权益,开通VIP直接复制
信息提交成功