ArcGIS Desktop轻松入门

<?xml version="1.0" encoding="UTF-8"?> <metadata xml:lang="en"> <idinfo> <citation> <citeinfo> <origin>USGS</origin> <pubdate>Unknown</pubdate> <title>Areas where the slope of the terrain is less than 40%</title> <geoform Sync="TRUE">vector digital data</geoform> <onlink>ArcTutor\Geoprocessing\San_Diego\slopelt40.shp</onlink> <ftname Sync="TRUE">slopelt40_Clip</ftname></citeinfo> </citation> <descript> <abstract>All locations in the study area where the slope of the terrain is less than 40%.</abstract> <purpose>This shapefile is intended to be used as one of the criteria for finding suitable habitat locations for the Californian Gnatcatcher. The bird is most likely to nest in areas where the slope of the terrain is less than 40%.</purpose> <supplinf>The original elevation data used to create slopelt40.shp was downloaded from USGS. A slope map was derived from the elevation data, then slopes less than 40% were extracted using the Spatial Analyst Raster Calculator. The following expression was entered: [slope] &lt; 40. The result was reclassified, giving NoData to all areas with a value of 0 (not less than 40% in slope) and 1 to all areas with a value of 1 (less than 40% in slope). The result was converted to a shapefile and then clipped to the study area. The result shows all locations in the San Diego county 7.5 minute quads of La Mesa, La Jolla, Del Mar and Poway where the slope of the terrrain is less than 40%.</supplinf> <langdata Sync="TRUE">zh</langdata></descript> <timeperd> <timeinfo> <sngdate> <caldate>unknown</caldate> </sngdate> </timeinfo> <current>Date source data was obtained from USGS</current> </timeperd> <status> <progress>Complete</progress> <update>None planned</update> </status> <spdom> <bounding> <westbc Sync="TRUE">-117.284519</westbc> <eastbc Sync="TRUE">-116.998734</eastbc> <northbc Sync="TRUE">33.002038</northbc> <southbc Sync="TRUE">32.748024</southbc> </bounding> <lboundng><leftbc Sync="TRUE">6244493.000191</leftbc><rightbc Sync="TRUE">6331457.000016</rightbc><bottombc Sync="TRUE">1853515.249956</bottombc><topbc Sync="TRUE">1945197.396345</topbc></lboundng></spdom> <keywords> <theme> <themekt>None</themekt> <themekey>Slopes less than 40%</themekey> </theme> <place> <placekey>A portion of San Diego County</placekey> </place> </keywords> <accconst>None.</accconst> <useconst>None.</useconst> <ptcontac> <cntinfo> <cntperp> <cntper>ArcGIS Development Team</cntper> <cntorg>Environmental Systems Research Institute, Inc. (ESRI)</cntorg> </cntperp> <cntaddr> <addrtype>mailing and physical address</addrtype> <address>380 New York St.</address> <city>Redlands</city> <state>CA</state> <postal>92373-8100</postal> <country>USA</country> </cntaddr> <cntvoice>909-793-2853</cntvoice> <cntfax>909-793-5953</cntfax> <cntemail>info@esri.com</cntemail> <hours>8:00 a.m.-5:30 p.m. Pacific time, Monday-Friday</hours> </cntinfo> </ptcontac> <datacred>USGS</datacred> <native Sync="TRUE">Microsoft Windows XP Version 5.1 (Build 2600) Service Pack 2; ESRI ArcCatalog 9.2.2.1350</native> <natvform Sync="TRUE">Shapefile</natvform></idinfo> <dataqual> <lineage> <procstep> <procdesc>The original elevation data used to create slopelt40.shp was downloaded from USGS. A slope map was derived from the elevation data, then slopes less than 40% were extracted using the Spatial Analyst Raster Calculator. The following expression was entered: [slope] &lt; 40. The result was reclassified, giving NoData to all areas with a value of 0 (not less than 40% in slope) and 1 to all areas with a value of 1 (less than 40% in slope). The result was converted to a shapefile and then clipped to the study area. The result shows all locations in the San Diego county 7.5 minute quads of La Mesa, La Jolla, Del Mar and Poway where the slope of the terrrain is less than 40%.</procdesc> <time Sync="TRUE">17173700</time> </procstep> <procstep> <procdesc Sync="TRUE">Metadata imported.</procdesc> <srcused Sync="TRUE">C:\DOCUME~1\jill2670\LOCALS~1\Temp\xml78E.tmp</srcused> <time Sync="TRUE">16483200</time> </procstep> <procstep><procdesc Sync="TRUE">Metadata imported.</procdesc><srcused Sync="TRUE">C:\DOCUME~1\jill2670\LOCALS~1\Temp\xml79C.tmp</srcused><date Sync="TRUE">20021103</date><time Sync="TRUE">17174200</time></procstep><procstep><procdesc Sync="TRUE">Dataset copied.</procdesc><srcused Sync="TRUE">F:\Fixed_GPTutorial_Data\Geoprocessing\San_Diego\slopelt40</srcused><date Sync="TRUE">20040123</date><time Sync="TRUE">15084300</time></procstep><procstep><procdesc Sync="TRUE">Dataset copied.</procdesc><srcused Sync="TRUE">D:\ArcTutor\Geoprocessing\San_Diego\slopelt40</srcused><date Sync="TRUE">20080328</date><time Sync="TRUE">08550900</time></procstep></lineage> </dataqual> <spdoinfo> <direct Sync="TRUE">Vector</direct> <ptvctinf> <sdtsterm Name="slopelt40_Clip"> <sdtstype Sync="TRUE">G-polygon</sdtstype> <ptvctcnt Sync="TRUE">0</ptvctcnt> </sdtsterm> <esriterm Name="slopelt40_Clip"><efeatyp Sync="TRUE">Simple</efeatyp><efeageom Sync="TRUE">Polygon</efeageom><esritopo Sync="TRUE">FALSE</esritopo><efeacnt Sync="TRUE">0</efeacnt><spindex Sync="TRUE">FALSE</spindex><linrefer Sync="TRUE">FALSE</linrefer></esriterm></ptvctinf> </spdoinfo> <spref> <horizsys> <planar> <planci> <plance Sync="TRUE">coordinate pair</plance> <coordrep> <absres Sync="TRUE">0.000000</absres> <ordres Sync="TRUE">0.000000</ordres> </coordrep> <plandu Sync="TRUE">survey feet</plandu> </planci> <mapproj><mapprojn Sync="TRUE">Lambert Conformal Conic</mapprojn><lambertc><stdparll Sync="TRUE">32.783333</stdparll><stdparll Sync="TRUE">33.883333</stdparll><longcm Sync="TRUE">-116.250000</longcm><latprjo Sync="TRUE">32.166667</latprjo><feast Sync="TRUE">6561666.666667</feast><fnorth Sync="TRUE">1640416.666667</fnorth></lambertc></mapproj></planar> <geodetic> <horizdn Sync="TRUE">North American Datum of 1983</horizdn> <ellips Sync="TRUE">Geodetic Reference System 80</ellips> <semiaxis Sync="TRUE">6378137.000000</semiaxis> <denflat Sync="TRUE">298.257222</denflat> </geodetic> <cordsysn><geogcsn Sync="TRUE">GCS_North_American_1983</geogcsn><projcsn Sync="TRUE">NAD_1983_StatePlane_California_VI_FIPS_0406_Feet</projcsn></cordsysn></horizsys> </spref> <eainfo> <detailed Name="slopelt40_Clip"> <enttyp> <enttypl Sync="TRUE">slopelt40_Clip</enttypl> <enttypt Sync="TRUE">Feature Class</enttypt><enttypc Sync="TRUE">0</enttypc></enttyp> <attr> <attrlabl Sync="TRUE">FID</attrlabl> <attrdef Sync="TRUE">Internal feature number.</attrdef> <attrdefs Sync="TRUE">ESRI</attrdefs> <attrdomv> <udom Sync="TRUE">Sequential unique whole numbers that are automatically generated.</udom> </attrdomv> <attalias Sync="TRUE">FID</attalias><attrtype Sync="TRUE">OID</attrtype><attwidth Sync="TRUE">4</attwidth><atprecis Sync="TRUE">10</atprecis><attscale Sync="TRUE">0</attscale></attr> <attr> <attrlabl Sync="TRUE">Shape</attrlabl> <attrdef Sync="TRUE">Feature geometry.</attrdef> <attrdefs Sync="TRUE">ESRI</attrdefs> <attrdomv> <udom Sync="TRUE">Coordinates defining the features.</udom> </attrdomv> <attalias Sync="TRUE">Shape</attalias><attrtype Sync="TRUE">Geometry</attrtype><attwidth Sync="TRUE">0</attwidth><atprecis Sync="TRUE">0</atprecis><attscale Sync="TRUE">0</attscale></attr> <attr><attrlabl Sync="TRUE">Id</attrlabl><attalias Sync="TRUE">Id</attalias><attrtype Sync="TRUE">Number</attrtype><attwidth Sync="TRUE">6</attwidth></attr></detailed> <overview></overview> </eainfo> <dist