没有合适的资源?快使用搜索试试~ 我知道了~
NSI1306.pdf
1.该资源内容由用户上传,如若侵权请联系客服进行举报
2.虚拟产品一经售出概不退款(资源遇到问题,请及时私信上传者)
2.虚拟产品一经售出概不退款(资源遇到问题,请及时私信上传者)
版权申诉
0 下载量 150 浏览量
2022-05-23
11:24:27
上传
评论
收藏 4.37MB PDF 举报
温馨提示
试读
26页
High Reliability Reinforced Isolated Sigma-Delta Modulator
资源推荐
资源详情
资源评论
NSi1306
High Reliability Reinforced
Isolated Sigma-Delta Modulator
Datasheet (EN) 1.5
Copyright © 2020, NOVOSENSE
Page
1
Product Overview
The NSI1306 is a high performance Σ-Δ modulator with
output separated from input based on the NOVOSENSE
capacitive isolation technology. The device has a linear
differential input signal range of ±50mV (±64mV full-scale)
or ±250mV (±320mV full-scale). The differential input is
ideally suited to shunt resistor-based current sensing in
high voltage applications where isolation is required.
The analog input is amplified and continuously sampled
by a second-order Σ-Δ modulator and converted to a high
speed, single bit data stream. The output data is
synchronous to the external clock with a frequency range
from 5MHz to 21MHz. By using an appropriate digital
filter (such as sinc3 filter) to decimate the bitstream, the
device can achieve 16 bits resolution and an
86dB/82.5dB signal to noise ratio (SNR) at 78.125kSPS
with a 20MHz master clock.
The fail-safe functions including input common-mode
overvoltage detection and missing AVDD detection
simplify system-level design and diagnostics.
Key Features
Up to 5000V
RMS
Insulation Voltage
Clock frequency: 5MHz to 21MHz
±50mV or ±250mV Linear Input Voltage Range
Excellent DC Performance:
Offset Error: ±50μV or ±100μV (Max)
Offset Drift: -0.5~1.5μV/℃ (Max)
Gain Error: ±0.2% (Max)
Gain Drift: ±40ppm/
℃
(Max)
SNR: 82.5dB or 86dB (Typ)
High CMTI: 150kV/μs (Typ)
System-Level Diagnostic Features:
AVDD monitoring
Input common-mode overvoltage detection
Operation Temperature: -40
℃
~125
℃
RoHS-Compliant Packages:
SOP8(300mil)
SOP16(300mil)
Safety Regulatory Approvals
UL recognition: up to 5000V
rms
for 1 minute per UL1577
CQC certification per GB4943.1-2011
CSA component notice 5A approval IEC60950-1 standard
DIN VDE V 0884-11:2017-01
Applications
Shunt current monitoring
AC motor controls
Power and solar inverters
Uninterruptible Power Suppliers
Automotive onboard chargers
Device Information
Part Number
Package
Body Size
NSI1306x-DSWVR
SOP8(300mil)
5.85mm × 7.50mm
NSI1306x-DSWR
SOP16(300mil)
10.30mm × 7.50mm
Functional Block Diagrams
Figure 1. NSi1306 Block Diagram
NSi1306
Datasheet (EN) 1.5
Copyright © 2020, NOVOSENSE
Page 2
INDEX
1. PIN CONFIGURATION AND FUNCTIONS
.......................................................................................................................................
3
2. ABSOLUTE MAXIMUM RATINGS
..................................................................................................................................................
5
3. RECOMMENDED OPERATING CONDITIONS
.................................................................................................................................
5
4. THERMAL INFORMATION
.............................................................................................................................................................
5
5. SPECIFICATIONS
............................................................................................................................................................................
6
5.1. ELECTRICAL CHARACTERISTICS: NSI1306M05
................................................................................................................................
6
5.2. ELECTRICAL CHARACTERISTICS: NSI1306M25
................................................................................................................................
8
5.3. TYPICAL PERFORMANCE CHARACTERISTICS
...................................................................................................................................
10
6. HIGH VOLTAGE FEATURE DESCRIPTION
.....................................................................................................................................
14
6.1. INSULATION AND SAFETY RELATED SPECIFICATIONS
........................................................................................................................
14
6.2. INSULATION CHARACTERISTICS
....................................................................................................................................................
14
6.3. REGULATORY INFORMATION
.......................................................................................................................................................
15
7. FUNCTION DESCRIPTION
............................................................................................................................................................
16
7.1. OVERVIEW
...............................................................................................................................................................................
16
7.2. ANALOG INPUT
........................................................................................................................................................................
16
7.3. DIGITAL INPUT
..........................................................................................................................................................................
16
7.4. DIGITAL OUTPUT
......................................................................................................................................................................
16
7.5. FAIL-SAFE OUTPUT
....................................................................................................................................................................
17
8. APPLICATION NOTE
.....................................................................................................................................................................
18
8.1. TYPICAL APPLICATION CIRCUIT
....................................................................................................................................................
18
8.2. SHUNT RESISTOR SELECTION
.......................................................................................................................................................
18
8.3. DIGITAL FILTER
.........................................................................................................................................................................
18
8.4. PCB LAYOUT
............................................................................................................................................................................
19
9. PACKAGE INFORMATION
............................................................................................................................................................
20
10. ORDERING INFORMATION
.......................................................................................................................................................
23
11. DOCUMENTATION SUPPORT
....................................................................................................................................................
23
12. TAPE AND REEL INFORMATION
................................................................................................................................................
24
13. REVISION HISTORY
....................................................................................................................................................................
26
NSi1306
Datasheet (EN) 1.5
Copyright © 2020, NOVOSENSE
Page
3
1. Pin Configuration and Functions
Figure 1.1 NSi1306 Package (SOP8(300mil))
Table 1.1 NSi1306 Pin Configuration and Description
NSi1306 PIN
NO.
SYMBOL
FUNCTION
1
AVDD
Power supply for analog side (3.0V to 5.5V)
2
INP
Positive analog input
(±250mV recommended for NSI1306M25 and ±50mV recommended for NSI1306M05)
3
INN
Negative analog input
4
AGND
Analog ground reference
5
DGND
Digital ground reference
6
DOUT
Modulator data output
7
CLKIN
Modulator clock input: 5~21MHz
8
DVDD
Power supply for digital side (3.0V to 5.5V)
NSi1306
Datasheet (EN) 1.5
Copyright © 2020, NOVOSENSE
Page
4
Figure 1.2 NSi1306 Package (SOP16(300mil))
Table 1.2 NSi1306 Pin Configuration and Description
NSi1306 PIN
NO.
SYMBOL
FUNCTION
1
NC
Internally connected to AVDD, this pin can be left floating or tied to AVDD
2
INP
Positive analog input
(±250mV recommended for NSI1306M25 and ±50mV recommended for NSI1306M05)
3
INN
Negative analog input
4
AGND/NC
Not internally connected. This pin can be tied to AGND, or leave floating.
5
NC
Not internally connected, this pin can be left floating or tied to AVDD, AGND
6
NC
Not internally connected, this pin can be left floating or tied to AVDD, AGND
7
AVDD
Power supply for analog side (3.0V to 5.5V)
8
AGND
Analog ground reference
9
DGND
Digital ground reference
10
NC
Not internally connected, this pin can be left floating or tied to DVDD, DGND
11
DOUT
Modulator data output
12
NC
Not internally connected, this pin can be left floating or tied to DVDD, DGND
13
CLKIN
Modulator clock input: 5~21MHz
14
DVDD
Power supply for digital side (3.0V to 5.5V)
15
NC
Not internally connected, this pin can be left floating or tied to DVDD, DGND
16
DGND
Digital ground reference
NSi1306
Datasheet (EN) 1.5
Copyright © 2020, NOVOSENSE
Page
5
2. Absolute Maximum Ratings
Parameters
Symbol
Min
Typ
Max
Unit
Power Supply Voltage
AVDD, DVDD
-0.3
6.5
V
Analog Input Voltage
INP, INN
AGND-6
AVDD+0.5
V
Digital Input Voltage
CLKIN
DGND-0.5
DVDD+0.5
V
Digital Output Voltage
DOUT
DGND-0.5
DVDD+0.5
V
Output current per Output Pin
Io
-10
10
mA
Operating Temperature
T
OPR
-40
125
℃
Junction Temperature
T
J
-40
150
℃
Storage Temperature
T
STG
-55
150
℃
Electrostatic discharge
HBM
(1)
±2000
V
CDM
(2)
±1000
V
(1) Human body model (HBM), per AEC-Q100-002-RevD
(2) Charged device model (CDM), per AEC-Q100-011-RevB
3. Recommended Operating Conditions
Parameters
Symbol
Min
Typ
Max
Unit
Analog Side Power Supply
AVDD
3.0
5.0
5.5
V
Digital Side Power Supply
DVDD
3.0
3.3
5.5
V
NSI1306M05
Differential input voltage before
clipping output
V
Clipping
±64
mV
Linear differential input full scale
voltage
V
FSR
-50
50
mV
Operating common-mode input
voltage
V
CM
-0.032
0.8
V
NSI1306M25
Differential input voltage before
clipping output
V
Clipping
±320
mV
Linear differential input full scale
voltage
V
FSR
-250
250
mV
Operating common-mode input
voltage
V
CM
-0.16
0.8
V
Operating Ambient Temperature
T
A
-40
125
℃
4. Thermal Information
Parameters
Symbol
SOP8(300mil)
SOP16(300mil)
Unit
Junction–to-ambient thermal resistance
R
θJA
86
82
℃/W
剩余25页未读,继续阅读
资源评论
std7879
- 粉丝: 104
- 资源: 2001
上传资源 快速赚钱
- 我的内容管理 展开
- 我的资源 快来上传第一个资源
- 我的收益 登录查看自己的收益
- 我的积分 登录查看自己的积分
- 我的C币 登录后查看C币余额
- 我的收藏
- 我的下载
- 下载帮助
最新资源
- 部署yolov8的tensorrt模型支持检测分割姿态估计的C++源码+部署步骤.zip
- 以简单、易用、高性能为目标、开源的时序数据库,支持Linux及Windows, Time Series Database.zip
- python-leetcode面试题解之第198题打家劫舍-题解.zip
- python-leetcode面试题解之第191题位1的个数-题解.zip
- python-leetcode面试题解之第186题反转字符串中的单词II-题解.zip
- 一个基于python的web后端高性能开发框架,下载可用
- python-leetcode面试题解之第179题最大数-题解.zip
- python-leetcode面试题解之第170题两数之和III数据结构设计-题解.zip
- python-leetcode面试题解之第168题Excel表列名称-题解.zip
- python-leetcode面试题解之第167题两数之和II输入有序数组-题解.zip
资源上传下载、课程学习等过程中有任何疑问或建议,欢迎提出宝贵意见哦~我们会及时处理!
点击此处反馈
安全验证
文档复制为VIP权益,开通VIP直接复制
信息提交成功