FLASH MEMORY
1
K9F5616U0B-YCB0,YIB0,PCB0,PIB0
K9F5616U0B-DCB0,DIB0,HCB0,HIB0
K9F5608U0B-YCB0,YIB0,PCB0,PIB0
K9F5608U0B-DCB0,DIB0,HCB0,HIB0
K9F5608Q0B-DCB0,DIB0,HCB0,HIB0 K9F5616Q0B-DCB0,DIB0,HCB0,HIB0
K9F5608U0B-VCB0,VIB0,FCB0,FIB0
Document Title
32M x 8 Bit , 16M x 16 Bit NAND Flash Memory
Revision History
The attached datasheets are prepared and approved by SAMSUNG Electronics. SAMSUNG Electronics CO., LTD. reserve the right
to change the specifications. SAMSUNG Electronics will evaluate and reply to your requests and questions about device. If you have
any questions, please contact the SAMSUNG branch office near you.
Revision No.
0.0
0.1
0.2
0.3
0.4
Remark
Advance
History
Initial issue.
At Read2 operation in X16 device
: A3 ~ A7 are Don’t care ==> A3 ~ A7 are "L"
1. IOL(R/B) of 1.8V device is changed.
-min. Value: 7mA -->3mA
-typ. Value: 8mA -->4mA
2. AC parameter is changed.
tRP(min.) : 30ns --> 25ns
3. WP pin provides hardware protection and is recommended to be kept
at VIL during power-up and power-down and recovery time of minimum
1µs is required before internal circuit gets ready for any command
sequences as shown in Figure 15.
---> WP pin provides hardware protection and is recommended to be
kept at VIL during power-up and power-down and recovery time of
minimum 10µs is required before internal circuit gets ready for any
command sequences as shown in Figure 15.
1. X16 TSOP1 pin is changed.
: #36 pin is changed from VccQ to N.C .
1. In X16 device, bad block information location is changed from 256th
byte to 256th and 261th byte.
2. tAR1, tAR2 are merged to tAR.(page 12)
(before revision) min. tAR1 = 20ns , min. tAR2 = 50ns
(after revision) min. tAR = 10ns
3. min. tCLR is changed from 50ns to 10ns.(page12)
4. min. tREA is changed from 35ns to 30ns.(page12)
5. min. tWC is changed from 50ns to 45ns.(page12)
6. Unique ID for Copyright Protection is available
-The device includes one block sized OTP(One Time Programmable),
which can be used to increase system security or to provide
identification capabilities. Detailed information can be obtained by
contact with Samsung.
7. tRHZ is divide into tRHZ and tOH.(page 12)
- tRHZ : RE High to Output Hi-Z
- tOH : RE High to Output Hold
8. tCHZ is divide into tCHZ and tOH.(page 12)
- tCHZ : CE High to Output Hi-Z
- tOH : CE High to Output Hold
Draft Date
May. 15th 2001
Sep. 20th 2001
Nov. 5th 2001
Feb. 15th 2002
Apr. 15th 2002
Note : For more detailed features and specifications including FAQ, please refer to Samsung’s Flash web site.
http://www.intl.samsungsemi.com/Memory/Flash/datasheets.html
评论0