DSP DM642 TCP-IP源代码

#include "Emac.h" #include "eth.h" //---------Raw Data Buffers---------- // // This program uses internal memory, so buffer size is // just 1518 In order to make sure buffers are cache // aligned, if each were in cacheable external memory // the size should be at least 1536 so as to fill enitre // cache line. #define PKT_MAX 32 #pragma DATA_SECTION(packet_header, ".ExtDat1"); EMAC_Pkt packet_header[PKT_MAX]; #pragma DATA_SECTION(packet_buffer, ".ExtDat1"); Uint8 packet_buffer[PKT_MAX][1536]; EMAC_Config g_emacConfig; PKTQ FreeQueue; // Free packets for RX or Tx PKTQ RxQueue; // Received packets // Declare some local status variables Handle hEMAC = 0; // Handle to our EMAC instance volatile uint LinkStatus = 0; // Current link status Uint8 SrcMacID[ETH_ALEN] = {0x00,0x20,0x45,0x20,0x35,0x68}; Uint32 EmacRxNumtest=0; int EmacInitial() { Uint32 i; g_emacConfig.ModeFlags = EMAC_CONFIG_MODEFLG_CHPRIORITY; g_emacConfig.MdioModeFlags = MDIO_MODEFLG_AUTONEG; g_emacConfig.TxChannels = 1; memcpy(g_emacConfig.MacAddr,SrcMacID,6); g_emacConfig.RxMaxPktPool = 8; g_emacConfig.pfcbGetPacket = &GetPacket; g_emacConfig.pfcbFreePacket = &FreePacket; g_emacConfig.pfcbRxPacket = &RxPacket; g_emacConfig.pfcbStatus = &StatusUpdate; g_emacConfig.pfcbStatistics = &StatisticsUpdate; InterruptInit(); EMACControlModuleInit(); MDIOInit(); EMACModuleInit(); // Initialize our buffer pool memset( &FreeQueue, 0, sizeof(PKTQ) ); memset( &RxQueue, 0, sizeof(PKTQ) ); // Init the buffer headers. Note that the // buffer pointer and buffer length are fixed for( i=0; i<PKT_MAX; i++ ) { memset( &packet_header[i], 0, sizeof(EMAC_Pkt) ); packet_header[i].pDataBuffer = packet_buffer[i]; packet_header[i].BufferLen = 1518; pqPush( &FreeQueue, &packet_header[i] ); } // Open EMAC instance if(EMAC_open( 1, (Handle)0x12345678, &g_emacConfig, &hEMAC )) { return -1; } // Set the receive filter // 只接收发给本机的网络包 if(EMAC_setReceiveFilter( hEMAC, EMAC_RXFILTER_BROADCAST)) { return -1; } return 1; } void EMACControlModuleInit() { Uint32 i; Uint32 tmpVal; // Globally disable EMAC/MDIO interrupts in wrapper and // put both EMAC and MDIO modules into reset EMAC_RSET( EWCTL, EMAC_FMKS( EWCTL, INTEN, DISABLE ) | EMAC_FMKS( EWCTL, EMACRST, YES ) | EMAC_FMKS( EWCTL, MDIORST, YES ) ); // Wait ablout 100 cycles for( i=0; i<5; i++ ) { tmpVal = EMAC_RGET( EWCTL ); } // Leave EMAC/MDIO interrupts disabled and take both // EMAC and MDIO modules out of reset EMAC_RSET( EWCTL, EMAC_FMKS( EWCTL, INTEN, DISABLE ) | EMAC_FMKS( EWCTL, EMACRST, NO ) | EMAC_FMKS( EWCTL, MDIORST, NO ) ); // Wait ablout 100 cycles for( i=0; i<5; i++ ) { tmpVal = EMAC_RGET( EWCTL ); } // Set EMAC Priority to "2" ,allocation regs "3" EMAC_RSET( EWTRCTRL, 0x23 ); // Set Interrupt Timer Count (CPUclk/4) EMAC_RSET( EWINTTCNT, 1500 ); // Enable global interrupt in wrapper EMAC_FSETS( EWCTL, INTEN, ENABLE ); return; } void MDIOInit() { #define PCLK 5 MDIO_RSET( CONTROL, MDIO_FMKS( CONTROL, ENABLE, YES ) | MDIO_FMK( CONTROL, CLKDIV, PCLK ) | MDIO_FMKS( CONTROL, PREAMBLE, DISABLED)); return; } void EMACModuleInit() { volatile Uint32 *pRegAddr; Uint32 i; Uint32 tmpVal = 0; //Disable transmit,receive and clear MACCCONTROL EMAC_FSETS( TXCONTROL, TXEN, DISABLE ); EMAC_FSETS( RXCONTROL, RXEN, DISABLE ); EMAC_RSET( MACCONTROL, 0 ); // MUST manually init TXnHDPs to NULL pRegAddr = EMAC_ADDR( TX0HDP ); for( i=0; i<8; i++ ) { *pRegAddr++ = 0; } // MUST manually init RXnHDPs to NULL pRegAddr = EMAC_ADDR( RX0HDP ); for( i=0; i<8; i++ ) { *pRegAddr++ = 0; } // 初始化统计寄存器 pRegAddr = EMAC_ADDR( RXGOODFRAMES ); for( i=0; i<36; i++ ) { *pRegAddr++ = 0; } //初始化MAC地址 00 01 02 03 04 05 //每个通道都初始化 pRegAddr = EMAC_ADDR( MACADDRL0 ); for( i=0; i<8; i++ ) { *pRegAddr++ = g_emacConfig.MacAddr[5]; } EMAC_RSET( MACADDRM, g_emacConfig.MacAddr[4] ); for( i=3; i>0; i--) { tmpVal = ( tmpVal<<8 ) | g_emacConfig.MacAddr[i]; } EMAC_RSET( MACADDRH, tmpVal ); // Buffer offset always be zero EMAC_RSET( RXBUFFEROFFSET, 0 ); // Clear Unicast receive on channel 0-7 EMAC_RSET( RXUNICASTCLEAR, 0xFF ); // Reset receive MBP enable register EMAC_RSET( RXMBPENABLE, 0 ); // Enable transmit channel and receive channel interrupts EMAC_RSET( TXINTMASKCLEAR, 0xFF ); EMAC_RSET( TXINTMASKSET , 1<<0 ); EMAC_RSET( RXINTMASKCLEAR, 0xFF ); EMAC_RSET( RXINTMASKSET , 1<<0 ); // Enable transmit EMAC_FSETS( TXCONTROL, TXEN, ENABLE ); // Enable receive EMAC_FSETS( RXCONTROL, RXEN, ENABLE ); //Enable global interrupt in control module EMAC_FSETS( EWCTL, INTEN, ENABLE ); return; } void InterruptInit() { IRQ_globalDisable(); IRQ_setVecs(vectors); IRQ_map(IRQ_EVT_MACINT, 6); IRQ_resetAll(); IRQ_nmiEnable(); IRQ_enable(IRQ_EVT_MACINT); //使能EMAC中断 IRQ_globalEnable(); return; } /* *----------GetPacket - Get empty packet for RX------------- * * This function is called from the EMAC module to get an * empty packet buffer. It returns a packet buffer to the * EMAC or returns NULL if there are no buffers available. */ EMAC_Pkt *GetPacket( Handle hApplication ) { EMAC_Pkt *pPkt; // Verify if handle came back OK. It is not used in this example if( (Uint32)hApplication != 0x12345678 ) { return(0); } // Pop a packet off our local free queue pPkt = pqPop(&FreeQueue); if( pPkt ) { // Tell the EMAC what offset to use by setting the DataOffset field // in the packet. pPkt->DataOffset = 0; } return( pPkt ); } /* * FreePacket - Free packet that originated from TX or GetPacket(). * * This function is called from the EMAC module to free a * packet buffer after a TX operation (or RX in the case of * a RX shutdown). * */ void FreePacket( Handle hApplication, EMAC_Pkt *pPKT ) { // Verify if handle came back OK. It is not used in this example if( (Uint32)hApplication != 0x12345678 ) { return; } pqPush( &FreeQueue, pPKT ); } /* * RxPacket - Reveived packet from the Network. * * This function is called by the EMAC to indicate a receive. * It just pushes the packet our receive queue. * * This function returns a free packet to replace the RX packet on * the EMAC queue. If there are no free packets available, it * returns NULL. */ EMAC_Pkt *RxPacket( Handle hApplication, EMAC_Pkt *pPKT ) { // Verify if handle came back OK. It is not used in this example if( (Uint32)hApplication != 0x12345678 ) { return(0); } net_handle((pPKT->pDataBuffer+pPKT->DataOffset),pPKT->ValidLen); pqPush( &FreeQueue, pPKT ); return( GetPacket(hApplication) ); } int Emac_Send(struct sk_buff *skb) { int i; if(skb->pPkt==0) { return -1; } skb->pPkt->Flags = EMAC_PKT_FLAGS_SOP | EMAC_PKT_FLAGS_EOP ; skb->pPkt->ValidLen = skb->len; skb->pPkt->DataOffset = 0; skb->pPkt->PktChannel = 0; skb->pPkt->PktLength = skb->len; skb->pPkt->PktFrags = 1; // Must mask DSP mapped EMAC ISR when calling EMAC functions IRQ_disable( IRQ_EVT_MACINT ); i = EMAC_sendPacket( hEMAC, skb->pPkt ); IRQ_enable( IRQ_EVT_MACINT ); if(i!=0) { return -1; } return 0; } int Emac_Get_Ad