droneyee项目包！

# ROS Wrapper for Intel&reg; RealSense&trade; Devices These are packages for using Intel RealSense cameras (D400 series SR300 camera and T265 Tracking Module) with ROS. This version supports Kinetic, Melodic and Noetic distributions. For running in ROS2 environment please switch to the [ros2 branch](https://github.com/IntelRealSense/realsense-ros/tree/ros2-beta). </br> LibRealSense2 supported version: v2.50.0 (see [realsense2_camera release notes](https://github.com/IntelRealSense/realsense-ros/releases)) ## Installation Instructions ### Ubuntu #### Step 1: Install the ROS distribution - #### Install [ROS Kinetic](http://wiki.ros.org/kinetic/Installation/Ubuntu), on Ubuntu 16.04, [ROS Melodic](http://wiki.ros.org/melodic/Installation/Ubuntu) on Ubuntu 18.04 or [ROS Noetic](http://wiki.ros.org/noetic/Installation/Ubuntu) on Ubuntu 20.04. ### Windows #### Step 1: Install the ROS distribution - #### Install [ROS Melodic or later on Windows 10](https://wiki.ros.org/Installation/Windows) ### There are 2 sources to install realsense2_camera from: * ### Method 1: The ROS distribution: *Ubuntu* realsense2_camera is available as a debian package of ROS distribution. It can be installed by typing: ```sudo apt-get install ros-$ROS_DISTRO-realsense2-camera``` This will install both realsense2_camera and its dependents, including librealsense2 library and matching udev-rules. Notice: * The version of librealsense2 is almost always behind the one availeable in RealSense&trade; official repository. * librealsense2 is not built to use native v4l2 driver but the less stable RS-USB protocol. That is because the last is more general and operational on a larger variety of platforms. * realsense2_description is available as a separate debian package of ROS distribution. It includes the 3D-models of the devices and is necessary for running launch files that include these models (i.e. rs_d435_camera_with_model.launch). It can be installed by typing: `sudo apt-get install ros-$ROS_DISTRO-realsense2-description` *Windows* **Chocolatey distribution Coming soon** * ### Method 2: The RealSense&trade; distribution: > This option is demonstrated in the [.travis.yml](https://github.com/intel-ros/realsense/blob/development/.travis.yml) file. It basically summerize the elaborate instructions in the following 2 steps: ### Step 1: Install the latest Intel&reg; RealSense&trade; SDK 2.0 *Ubuntu* Install librealsense2 debian package: * Jetson users - use the [Jetson Installation Guide](https://github.com/IntelRealSense/librealsense/blob/master/doc/installation_jetson.md) * Otherwise, install from [Linux Debian Installation Guide](https://github.com/IntelRealSense/librealsense/blob/master/doc/distribution_linux.md#installing-the-packages) - In that case treat yourself as a developer. Make sure you follow the instructions to also install librealsense2-dev and librealsense2-dkms packages. *Windows* Install using vcpkg `vcpkg install realsense2:x64-windows` #### OR - #### Build from sources by downloading the latest [Intel&reg; RealSense&trade; SDK 2.0](https://github.com/IntelRealSense/librealsense/releases/tag/v2.50.0) and follow the instructions under [Linux Installation](https://github.com/IntelRealSense/librealsense/blob/master/doc/installation.md) ### Step 2: Install Intel&reg; RealSense&trade; ROS from Sources - Create a [catkin](http://wiki.ros.org/catkin#Installing_catkin) workspace *Ubuntu* ```bash mkdir -p ~/catkin_ws/src cd ~/catkin_ws/src/ ``` *Windows* ```batch mkdir c:\catkin_ws\src cd c:\catkin_ws\src ``` - Clone the latest Intel&reg; RealSense&trade; ROS from [here](https://github.com/intel-ros/realsense/releases) into 'catkin_ws/src/' ```bashrc git clone https://github.com/IntelRealSense/realsense-ros.git cd realsense-ros/ git checkout `git tag | sort -V | grep -P "^2.\d+\.\d+" | tail -1` cd .. ``` - Make sure all dependent packages are installed. You can check .travis.yml file for reference. - Specifically, make sure that the ros package *ddynamic_reconfigure* is installed. If *ddynamic_reconfigure* cannot be installed using APT or if you are using *Windows* you may clone it into your workspace 'catkin_ws/src/' from [here](https://github.com/pal-robotics/ddynamic_reconfigure/tree/kinetic-devel) ```bash catkin_init_workspace cd .. catkin_make clean catkin_make -DCATKIN_ENABLE_TESTING=False -DCMAKE_BUILD_TYPE=Release catkin_make install ``` *Ubuntu* ```bash echo "source ~/catkin_ws/devel/setup.bash" >> ~/.bashrc source ~/.bashrc ``` *Windows* ```batch devel\setup.bat ``` ## Usage Instructions ### Start the camera node To start the camera node in ROS: ```bash roslaunch realsense2_camera rs_camera.launch ``` This will stream all camera sensors and publish on the appropriate ROS topics. Other stream resolutions and frame rates can optionally be provided as parameters to the 'rs_camera.launch' file. ### Published Topics The published topics differ according to the device and parameters. After running the above command with D435i attached, the following list of topics will be available (This is a partial list. For full one type `rostopic list`): - /camera/color/camera_info - /camera/color/image_raw - /camera/color/metadata - /camera/depth/camera_info - /camera/depth/image_rect_raw - /camera/depth/metadata - /camera/extrinsics/depth_to_color - /camera/extrinsics/depth_to_infra1 - /camera/extrinsics/depth_to_infra2 - /camera/infra1/camera_info - /camera/infra1/image_rect_raw - /camera/infra2/camera_info - /camera/infra2/image_rect_raw - /camera/gyro/imu_info - /camera/gyro/metadata - /camera/gyro/sample - /camera/accel/imu_info - /camera/accel/metadata - /camera/accel/sample - /diagnostics >Using an L515 device the list differs a little by adding a 4-bit confidence grade (pulished as a mono8 image): >- /camera/confidence/camera_info >- /camera/confidence/image_rect_raw > >It also replaces the 2 infrared topics with the single available one: >- /camera/infra/camera_info >- /camera/infra/image_raw The "/camera" prefix is the default and can be changed. Check the rs_multiple_devices.launch file for an example. If using D435 or D415, the gyro and accel topics wont be available. Likewise, other topics will be available when using T265 (see below). ### Launch parameters The following parameters are available by the wrapper: - **serial_no**: will attach to the device with the given serial number (*serial_no*) number. Default, attach to available RealSense device in random. - **usb_port_id**: will attach to the device with the given USB port (*usb_port_id*). i.e 4-1, 4-2 etc. Default, ignore USB port when choosing a device. - **device_type**: will attach to a device whose name includes the given *device_type* regular expression pattern. Default, ignore device type. For example, device_type:=d435 will match d435 and d435i. device_type=d435(?!i) will match d435 but not d435i. - **rosbag_filename**: Will publish topics from rosbag file. - **initial_reset**: On occasions the device was not closed properly and due to firmware issues needs to reset. If set to true, the device will reset prior to usage. - **reconnect_timeout**: When the driver cannot connect to the device try to reconnect after this timeout (in seconds). - **align_depth**: If set to true, will publish additional topics for the "aligned depth to color" image.: ```/camera/aligned_depth_to_color/image_raw```, ```/camera/aligned_depth_to_color/camera_info```.</br> The pointcloud, if enabled, will be built based on the aligned_depth_to_color image.</br> - **filters**: any of the following options, separated by commas:</br> - ```colorizer```: will color the depth image. On the depth topic an RGB image will be published, instead of the 16bit depth values . - ```pointcloud```: will add a