/**
@page USART_Printf USART_Printf
@verbatim
******************** (C) COPYRIGHT 2010 STMicroelectronics *******************
* @file USART/Printf/readme.txt
* @author MCD Application Team
* @version V3.3.0
* @date 04/16/2010
* @brief Description of the USART Printf Example.
******************************************************************************
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
******************************************************************************
@endverbatim
@par Example Description
This example shows how to retarget the C library printf function to the USART.
This implementation output the printf message on the Hyperterminal using USARTx.
USARTx can be USART1 or USART2 depending on the EVAL board you are using.
The USARTx is configured as follow:
- BaudRate = 115200 baud
- Word Length = 8 Bits
- One Stop Bit
- No parity
- Hardware flow control disabled (RTS and CTS signals)
- Receive and transmit enabled
@par Directory contents
- USART/Printf/stm32f10x_conf.h Library Configuration file
- USART/Printf/stm32f10x_it.h Interrupt handlers header file
- USART/Printf/stm32f10x_it.c Interrupt handlers
- USART/Printf/main.c Main program
@par Hardware and Software environment
- This example runs on STM32F10x Connectivity line, High-Density, Medium-Density,
XL-Density, Medium-Density Value line, Low-Density and Low-Density Value line Devices.
- This example has been tested with STMicroelectronics STM32100B-EVAL (Medium-Density
Value line), STM3210C-EVAL (Connectivity line), STM3210E-EVAL (High-Density and
XL-Density) and STM3210B-EVAL (Medium-Density) evaluation boards and can be easily
tailored to any other supported device and development board.
To select the STMicroelectronics evaluation board used to run the example,
uncomment the corresponding line in stm32_eval.h file (under Utilities\STM32_EVAL)
- STM32100B-EVAL Set-up
- Connect a null-modem female/female RS232 cable between the DB9 connector
CN10 and PC serial port.
- STM3210C-EVAL Set-up
- Connect a null-modem female/female RS232 cable between the DB9 connector
CN6 (USART2) and PC serial port.
@note Make sure that jumpers JP19 and JP18 are open.
- STM3210E-EVAL Set-up
- Connect a null-modem female/female RS232 cable between the DB9 connector
CN12(when USART1 is used) and PC serial port.
- STM3210B-EVAL Set-up
- Connect a null-modem female/female RS232 cable between the DB9 connector
CN6(when USART1 is used) and PC serial port.
- Hyperterminal configuration:
- Word Length = 8 Bits
- One Stop Bit
- No parity
- BaudRate = 115200 baud
- flow control: None
@par How to use it ?
In order to make the program work, you must do the following :
- Create a project and setup all project configuration
- Add the required Library files :
- stm32f10x_exti.c
- stm32f10x_gpio.c
- stm32f10x_rcc.c
- stm32f10x_usart.c
- stm32f10x_i2c.c
- stm32f10x_spi.c
- misc.c
- stm32_eval.c (under Utilities\STM32_EVAL)
- system_stm32f10x.c (under Libraries\CMSIS\CM3\DeviceSupport\ST\STM32F10x)
- Edit stm32f10x.h file to select the device you are working on.
- Edit stm32_eval.h file to select the evaluation board you will use.
@b Tip: You can tailor the provided project template to run this example, for
more details please refer to "stm32f10x_stdperiph_lib_um.chm" user
manual; select "Peripheral Examples" then follow the instructions
provided in "How to proceed" section.
- Link all compiled files and load your image into target memory
- Run the example
@note
- Low-density Value line devices are STM32F100xx microcontrollers where the
Flash memory density ranges between 16 and 32 Kbytes.
- Low-density devices are STM32F101xx, STM32F102xx and STM32F103xx
microcontrollers where the Flash memory density ranges between 16 and 32 Kbytes.
- Medium-density Value line devices are STM32F100xx microcontrollers where
the Flash memory density ranges between 64 and 128 Kbytes.
- Medium-density devices are STM32F101xx, STM32F102xx and STM32F103xx
microcontrollers where the Flash memory density ranges between 64 and 128 Kbytes.
- High-density devices are STM32F101xx and STM32F103xx microcontrollers where
the Flash memory density ranges between 256 and 512 Kbytes.
- XL-density devices are STM32F101xx and STM32F103xx microcontrollers where
the Flash memory density ranges between 512 and 1024 Kbytes.
- Connectivity line devices are STM32F105xx and STM32F107xx microcontrollers.
* <h3><center>© COPYRIGHT 2010 STMicroelectronics</center></h3>
*/
没有合适的资源?快使用搜索试试~ 我知道了~
资源推荐
资源详情
资源评论
收起资源包目录
毕设&课程作业_基于stm32 ESP8266WiFi模块smartlink连接实例.zip (73个子文件)
Graduation Design
interface.h 428B
stm32f10x_conf.h 3KB
stringAPIext.h 646B
.gitattributes 378B
Objects
htdemo.hex 21KB
uart.h 272B
Doc
readme.txt 5KB
serialportAPI.h 476B
startup_stm32f10x_hd.s 15KB
interface.c 3KB
uart.c 4KB
CMSIS
system_stm32f10x.c 30KB
core_cm3.h 82KB
core_cm3.c 16KB
stm32f10x.h 599KB
system_stm32f10x.h 2KB
ESP8266.c 15KB
ESP8266.h 1KB
.gitignore 103B
main.c 2KB
Dbg_RAM.ini 1KB
htdemo.uvproj 22KB
serialportAPI.c 2KB
StdPeriph_Driver
inc
stm32f10x_bkp.h 7KB
stm32f10x_sdio.h 21KB
stm32f10x_dbgmcu.h 4KB
misc.h 8KB
stm32f10x_cec.h 6KB
stm32f10x_can.h 20KB
stm32f10x_fsmc.h 25KB
stm32f10x_spi.h 17KB
stm32f10x_wwdg.h 3KB
stm32f10x_dma.h 20KB
stm32f10x_exti.h 6KB
stm32f10x_tim.h 48KB
stm32f10x_crc.h 2KB
stm32f10x_rtc.h 4KB
stm32f10x_usart.h 16KB
stm32f10x_rcc.h 29KB
stm32f10x_dac.h 14KB
stm32f10x_adc.h 21KB
stm32f10x_i2c.h 28KB
stm32f10x_gpio.h 18KB
stm32f10x_pwr.h 4KB
stm32f10x_flash.h 24KB
stm32f10x_iwdg.h 4KB
src
stm32f10x_adc.c 45KB
stm32f10x_wwdg.c 5KB
misc.c 7KB
stm32f10x_spi.c 29KB
stm32f10x_gpio.c 19KB
stm32f10x_tim.c 102KB
stm32f10x_sdio.c 27KB
stm32f10x_bkp.c 8KB
stm32f10x_rtc.c 8KB
stm32f10x_dac.c 18KB
stm32f10x_dma.c 27KB
stm32f10x_fsmc.c 33KB
stm32f10x_exti.c 6KB
stm32f10x_pwr.c 9KB
stm32f10x_i2c.c 41KB
stm32f10x_crc.c 3KB
stm32f10x_cec.c 11KB
stm32f10x_can.c 30KB
stm32f10x_iwdg.c 5KB
stm32f10x_usart.c 36KB
stm32f10x_dbgmcu.c 5KB
stm32f10x_flash.c 61KB
stm32f10x_rcc.c 49KB
stm32f10x_it.c 5KB
stm32f10x_it.h 2KB
stringAPIext.c 1KB
JLinkSettings.ini 352B
共 73 条
- 1
资源评论
学术菜鸟小晨
- 粉丝: 1w+
- 资源: 4940
上传资源 快速赚钱
- 我的内容管理 展开
- 我的资源 快来上传第一个资源
- 我的收益 登录查看自己的收益
- 我的积分 登录查看自己的积分
- 我的C币 登录后查看C币余额
- 我的收藏
- 我的下载
- 下载帮助
安全验证
文档复制为VIP权益,开通VIP直接复制
信息提交成功