/**
* Mirf
*
* Additional bug fixes and improvements
* 11/03/2011:
* Switched spi library.
* 07/13/2010:
* Added example to read a register
* 11/12/2009:
* Fix dataReady() to work correctly
* Renamed keywords to keywords.txt ( for IDE ) and updated keyword list
* Fixed client example code to timeout after one second and try again
* when no response received from server
* By: Nathan Isburgh <nathan@mrroot.net>
* $Id: mirf.cpp 67 2010-07-13 13:25:53Z nisburgh $
*
*
* An Ardunio port of:
* http://www.tinkerer.eu/AVRLib/nRF24L01
*
* Significant changes to remove depencence on interupts and auto ack support.
*
* Aaron Shrimpton <aaronds@gmail.com>
*
*/
/*
Copyright (c) 2007 Stefan Engelke <mbox@stefanengelke.de>
Permission is hereby granted, free of charge, to any person
obtaining a copy of this software and associated documentation
files (the "Software"), to deal in the Software without
restriction, including without limitation the rights to use, copy,
modify, merge, publish, distribute, sublicense, and/or sell copies
of the Software, and to permit persons to whom the Software is
furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be
included in all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
DEALINGS IN THE SOFTWARE.
$Id: mirf.cpp 67 2010-07-13 13:25:53Z nisburgh $
*/
#include "Mirf.h"
// Defines for setting the MiRF registers for transmitting or receiving mode
Nrf24l Mirf = Nrf24l();
Nrf24l::Nrf24l(){
cePin = 8;
csnPin = 7;
channel = 1;
payload = 16;
spi = NULL;
}
void Nrf24l::transferSync(uint8_t *dataout,uint8_t *datain,uint8_t len){
uint8_t i;
for(i = 0;i < len;i++){
datain[i] = spi->transfer(dataout[i]);
}
}
void Nrf24l::transmitSync(uint8_t *dataout,uint8_t len){
uint8_t i;
for(i = 0;i < len;i++){
spi->transfer(dataout[i]);
}
}
void Nrf24l::init()
// Initializes pins to communicate with the MiRF module
// Should be called in the early initializing phase at startup.
{
pinMode(cePin,OUTPUT);
pinMode(csnPin,OUTPUT);
ceLow();
csnHi();
// Initialize spi module
spi->begin();
}
void Nrf24l::config()
// Sets the important registers in the MiRF module and powers the module
// in receiving mode
// NB: channel and payload must be set now.
{
// Set RF channel
configRegister(RF_CH,channel);
// Set length of incoming payload
configRegister(RX_PW_P0, payload);
configRegister(RX_PW_P1, payload);
// Start receiver
powerUpRx();
flushRx();
}
void Nrf24l::setRADDR(uint8_t * adr)
// Sets the receiving address
{
ceLow();
writeRegister(RX_ADDR_P1,adr,mirf_ADDR_LEN);
ceHi();
}
void Nrf24l::setTADDR(uint8_t * adr)
// Sets the transmitting address
{
/*
* RX_ADDR_P0 must be set to the sending addr for auto ack to work.
*/
writeRegister(RX_ADDR_P0,adr,mirf_ADDR_LEN);
writeRegister(TX_ADDR,adr,mirf_ADDR_LEN);
}
extern bool Nrf24l::dataReady()
// Checks if data is available for reading
{
// See note in getData() function - just checking RX_DR isn't good enough
uint8_t status = getStatus();
// We can short circuit on RX_DR, but if it's not set, we still need
// to check the FIFO for any pending packets
if ( status & (1 << RX_DR) ) return 1;
return !rxFifoEmpty();
}
extern bool Nrf24l::rxFifoEmpty(){
uint8_t fifoStatus;
readRegister(FIFO_STATUS,&fifoStatus,sizeof(fifoStatus));
return (fifoStatus & (1 << RX_EMPTY));
}
extern void Nrf24l::getData(uint8_t * data)
// Reads payload bytes into data array
{
csnLow(); // Pull down chip select
spi->transfer( R_RX_PAYLOAD ); // Send cmd to read rx payload
transferSync(data,data,payload); // Read payload
csnHi(); // Pull up chip select
// NVI: per product spec, p 67, note c:
// "The RX_DR IRQ is asserted by a new packet arrival event. The procedure
// for handling this interrupt should be: 1) read payload through SPI,
// 2) clear RX_DR IRQ, 3) read FIFO_STATUS to check if there are more
// payloads available in RX FIFO, 4) if there are more data in RX FIFO,
// repeat from step 1)."
// So if we're going to clear RX_DR here, we need to check the RX FIFO
// in the dataReady() function
configRegister(STATUS,(1<<RX_DR)); // Reset status register
}
void Nrf24l::configRegister(uint8_t reg, uint8_t value)
// Clocks only one byte into the given MiRF register
{
csnLow();
spi->transfer(W_REGISTER | (REGISTER_MASK & reg));
spi->transfer(value);
csnHi();
}
void Nrf24l::readRegister(uint8_t reg, uint8_t * value, uint8_t len)
// Reads an array of bytes from the given start position in the MiRF registers.
{
csnLow();
spi->transfer(R_REGISTER | (REGISTER_MASK & reg));
transferSync(value,value,len);
csnHi();
}
void Nrf24l::writeRegister(uint8_t reg, uint8_t * value, uint8_t len)
// Writes an array of bytes into inte the MiRF registers.
{
csnLow();
spi->transfer(W_REGISTER | (REGISTER_MASK & reg));
transmitSync(value,len);
csnHi();
}
void Nrf24l::send(uint8_t * value)
// Sends a data package to the default address. Be sure to send the correct
// amount of bytes as configured as payload on the receiver.
{
uint8_t status;
status = getStatus();
while (PTX) {
status = getStatus();
if((status & ((1 << TX_DS) | (1 << MAX_RT)))){
PTX = 0;
break;
}
} // Wait until last paket is send
ceLow();
powerUpTx(); // Set to transmitter mode , Power up
csnLow(); // Pull down chip select
spi->transfer( FLUSH_TX ); // Write cmd to flush tx fifo
csnHi(); // Pull up chip select
csnLow(); // Pull down chip select
spi->transfer( W_TX_PAYLOAD ); // Write cmd to write payload
transmitSync(value,payload); // Write payload
csnHi(); // Pull up chip select
ceHi(); // Start transmission
}
/**
* isSending.
*
* Test if chip is still sending.
* When sending has finished return chip to listening.
*
*/
bool Nrf24l::isSending(){
uint8_t status;
if(PTX){
status = getStatus();
/*
* if sending successful (TX_DS) or max retries exceded (MAX_RT).
*/
if((status & ((1 << TX_DS) | (1 << MAX_RT)))){
powerUpRx();
return false;
}
return true;
}
return false;
}
uint8_t Nrf24l::getStatus(){
uint8_t rv;
readRegister(STATUS,&rv,1);
return rv;
}
void Nrf24l::powerUpRx(){
PTX = 0;
ceLow();
configRegister(CONFIG, mirf_CONFIG | ( (1<<PWR_UP) | (1<<PRIM_RX) ) );
ceHi();
configRegister(STATUS,(1 << TX_DS) | (1 << MAX_RT));
}
void Nrf24l::flushRx(){
csnLow();
spi->transfer( FLUSH_RX );
csnHi();
}
void Nrf24l::powerUpTx(){
PTX = 1;
configRegister(CONFIG, mirf_CONFIG | ( (1<<PWR_UP) | (0<<PRIM_RX) ) );
}
void Nrf24l::ceHi(){
digitalWrite(cePin,HIGH);
}
void Nrf24l::ceLow(){
digitalWrite(cePin,LOW);
}
void Nrf24l::csnHi(){
digitalWrite(csnPin,HIGH);
}
void Nrf24l::csnLow(){
digitalWrite(cs
LS_nRF24L01.zip （15个子文件） 
[库文件]请复制里面的文件夹到Arduino的libraries里 
.DS_Store 8KB Mirf keywords 691B MirfSpiDriver.h 244B examples ping_server_interupt ping_server_interupt.pde 2KB ping_client ping_client.pde 2KB ping_server ping_server.pde 2KB reg_read reg_read.pde 689B MirfSpiDriver.cpp 150B nRF24L01.h 3KB MirfHardwareSpiDriver.h 328B Mirf.cpp 8KB Mirf.h 3KB MirfHardwareSpiDriver.cpp 321B Arduino 程序源码 LS_Sender LS_Sender.ino 715B LS_Receiver LS_Receiver.ino 678B资源评论
