没有合适的资源?快使用搜索试试~ 我知道了~
Shure舒尔BETA52A使用说明书.pdf
1.该资源内容由用户上传,如若侵权请联系客服进行举报
2.虚拟产品一经售出概不退款(资源遇到问题,请及时私信上传者)
2.虚拟产品一经售出概不退款(资源遇到问题,请及时私信上传者)
版权申诉
0 下载量 105 浏览量
2023-02-11
19:11:31
上传
评论
收藏 780KB PDF 举报
温馨提示
试读
12页
Shure舒尔品牌说明书
资源推荐
资源详情
资源评论
Model BETA 52
®
A User Guide
27D2799 (Rev. 5) Printed in U.S.A.
©2005, Shure Incorporated
SUPERCARDIOID DYNAMIC INSTRUMENT
MICROPHONE
GENERAL
The Shure BETA 52
®
A is a high output dynamic microphone
with a tailored frequency response designed specifically for kick
drums and other bass instruments. It provides superb attack and
“punch,” and delivers studio quality sound even at extremely high
sound pressure levels.
The BETA 52A features a modified supercardioid pattern through
-
out its frequency range to insure high gain before feedback and
excellent rejection of unwanted sound. A built–in dynamic locking
stand adapter with an integral XLR connector simplifies installa
-
tion, particularly if the microphone is to be placed inside a kick
drum. The stand adapter keeps the microphone position fixed and
resists slipping, even when subjected to sharp blows and strong
vibrations. A hardened steel mesh grille protects the BETA 52A
from the abuse and wear associated with touring.
FEATURES
Frequency response shaped specifically for kick drums
and bass instruments
Built–in dynamic locking stand adapter with integral XLR
connector simplifies setup, especially inside a kick drum
Studio quality performance, even at extremely high sound
pressure levels
Supercardioid pattern for high gain before feedback and
superior rejection of unwanted noise
Hardened steel mesh grille that resists wear and abuse
Advanced pneumatic shock mount system that minimizes
transmission of mechanical noise and vibration
Neodymium magnet for high signal–to–noise ratio output
Low sensitivity to varying load impedance
Legendary Shure quality and reliability
•
•
•
•
•
•
•
•
•
APPLICATIONS AND PLACEMENT
The most common BETA 52A applications and placement tech-
niques are listed in the following table. Keep in mind that micro-
phone technique is largely a matter of personal taste– there is no
one “correct” microphone position.
Application Suggested Microphone
Placement
Tone Quality
Kick Drum
5 to 7.5 cm (2 to 3 in.) away
from beater head, slightly
off-center from beater.
Sharp attack; maximum
bass sound, highest sound
pressure level.
20 to 30 cm (8 to 12 in.)
from beater head, on-axis
with beater.
Medium attack; balanced
sound.
20 to 30 cm (8 to 12 in.)
from beater head, 15 to 20
cm (6 to 8 in.) from edge
of head.
Medium attack; thin, re-
duced bass sound.
5 to 7.5 cm (2 to 3 in.) away
from outside head, on-axis
with beater (double head
kickdrum only).
Softer attack; balanced,
resonant sound.
NOTE: To “tighten” the
beat, place a pillow or
blanket on bottom of drum
against beater head.
Electric
Bass Ampli-
fier
2.5 cm (1 in.) from speaker,
on-axis with center of
speaker cone.
Sharp attack; emphasized
bass.
2.5 cm (1 in.) from speaker,
at edge of speaker cone.
Sharp attack; higher fre-
quency sound.
10 to 15 cm (4 to 6 in.) from
speaker, on-axis with center
of speaker cone.
Sharp attack; full, balanced
sound.
60 to 90 cm (2 to 3 ft.) from
speaker, on-axis with center
of speaker cone.
Soft attack; mellow, higher
frequency sound.
MOUNTING THE BETA 52A ON A MICROPHONE STAND
The built–in stand adapter features a dynamic locking system
that permits adjustments to the microphone’s position, but resists
slipping when struck or bumped. To mount the BETA 52A on a
stand and adjust its position, proceed as follows:
Screw the integral stand adapter onto the end of a micro-
phone stand (see Figure 3). Adjust the stand height and
position as necessary.
Pivot the BETA 52A until it is in the desired position rela
-
tive to the drum head or loudspeaker.
Lock the BETA 52A in place by rotating the adjustment
knob on the stand adapter clockwise until it is tight. Do
NOT overtighten the knob with tools.
If necessary, make minor adjustments to the microphone
position without loosening the adjustment knob.
Connect an audio cable to the integral XLR connector.
1.
2.
3.
4.
5.
MODEL BETA 52
®
A
2
SPECIFICATIONS
Type
Dynamic (moving coil)
Frequency Response
20 to 10,000 Hz
NOTE: The curve below shows on–axis response at a distance
of 2 feet from a uniform sound source. Your response may vary,
depending on microphone position
20 200001000 1000050 100
98765432 98765432
+1
0
0
–10
Hz
dB
-20
+2
0
3 mm
(1/8 in.)
25 mm
(1 in.)
51 mm
(2 in.)
.06 m
(2 ft)
FIGURE 1
Polar Pattern
Supercardioid, rotationally symmetrical about microphone axis
150°
120°
150°
120°
180°
30°
60°
90°
30°
60°
0
90°
–10 dB
–20 dB
–15 dB
–5 dB
150°
120°
150°
120°
180°
30°
60°
90°
30°
60°
0
90°
–10 dB
–20 dB
–15 dB
–5 dB
500 Hz
1000 Hz
250 Hz 2500 Hz
FIGURE 2
Output Level (at 1,000 Hz)
Open Circuit Voltage: –64 dBV/Pa* (0.6 mV)
*1 Pa = 94 dB SPL
Impedance
Rated impedance is 150 Ω (45 Ω actual) for connection to
microphone inputs rated low Z
Phasing
Positive pressure on diaphragm produces positive voltage on
pin 2 with respect to pin 3
Maximum SPL
174 dB at 1000 Hz (calculated)
Connector
Three–pin professional audio connector (male XLR type)
Case
Silver blue enamel–painted die cast metal with hardened,
matte-finished steel grille
Adjustable, Locking Stand Adapter
Integral, dynamic locking, adjustable through 180°, with stan-
dard 5/8”-27 thread
4.451
6.406
3.750
180
STAND
ADAPTER
ADJUSTMENT
KNOB
MICROPHONE
STAND
FIGURE 3
Net Weight
605 grams (21.6 oz)
CERTIFICATION
Eligible to bear CE Marking. Conforms to European EMC
Directive 89/336/EEC. Meets applicable tests and performance
criteria in European Standard EN55103 (1996) parts 1 and 2,
for residential (E1) and light industrial (E2) environments.
FURNISHED ACCESSORIES
Storage Bag . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26A25
5/8” to 3/8” (Euro) Thread Adapter . . . . . . . . . . . .95A2050
OPTIONAL ACCESSORIES
7.6 m (25 ft) Cable . . . . . . . . . . . . . . . . . . . . . . . . .C25E, C25F
REPLACEMENT PARTS
Cartridge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R175
Screen and Grille Assembly . . . . . . . . . . . . . . . . .RK321
Plug (connector) Assembly . . . . . . . . . . . . . . . . . .90F1984
NOTE: Use care when removing the cartridge holder from the base
to prevent breakage of the lead wires.
For additional Service or parts information, please contact Shure’s
Service department at 1–800–516–2525. Outside the United
States, please contact your authorized Shure Service Center.
3
MICROPHONE DYNAMIQUE SUPERCARDIOÏDE POUR
INSTRUMENTS
GÉNÉRALITÉS
Le Shure BETA 52
®
A est un microphone dynamique à haut niveau
de sortie présentant une courbe de réponse spécialement étudiée
pour les grosses–caisses et autres instruments basse. Il offre
une attaque et un ”punch” exceptionnels et une qualité de studio,
même dans des conditions de pression acoustique extrême.
Le BETA 52A maintient une configuration cardioïde dans toute sa
gamme de fréquences pour assurer un gain élevé avant Larsen
et un excellent rejet des bruits indésirables. L’adaptateur de pied
intégral, réglable et verrouillable avec connecteur XLR simplifie
l’installation, en particulier lorsque le micro est placé à l’intérieur
de la grosse caisse. La grille en acier trempé protège le BETA 52A
des rigueurs des tournées.
AVANTAGES
Courbe de réponse spécialement étudiée pour les gros-
ses–caisses et instruments basse.
L’adaptateur de pied intégral, réglable et verrouillable
avec connecteur XLR simplifie l’installation, en particulier
lorsque le micro est placé à l’intérieur de la grosse caisse.
Qualité studio, même à des pressions acoustiques éle-
vées.
Configuration supercardioïde pour un gain élevé avant
Larsen et rejet supérieur des bruits indésirables.
Grille en acier trempé résistante à l’usure et aux mauvais
traitements.
Système antichocs pneumatique avancé, réduisant la
transmission des bruits mécaniques et des vibrations.
Aimant au néodymium pour un rapport signal/bruit élevé.
Faible sensibilité aux changements d’impédance de
charge.
Qualité et fiabilité légendaires de Shure.
APPLICATIONS ET PLACEMENT
Les applications les plus courantes du BETA 52A sont indiquées
dans le tableau ci–dessous. Ne pas oublier que la technique de
placement des micros est surtout une question de goût personnel
et qu’il n’y a pas de position ”correcte”.
•
•
•
•
•
•
•
•
•
Application Placement Suggéré
Sonorit
Grosse
caisse
5 à 7,5 cm de la peau de
frappe, légèrement décalé
par rapport à la batte.
Attaque franche, basse
maximum, pression acous-
tique maximum.
20 à 30 cm de la batte,
dans son axe.
Attaque moyenne, son
équilibré.
20 à 30 cm de la batte, 20 à
30 cm du cerclage.
Attaque moyenne, petit
son, basses réduites.
5 to 7.5 cm (2 to 3 in.) away
from outside head, on-axis
with beater (double head
kickdrum only).
Attaque douce, son équili-
bré et résonnant.
REMARQUE : pour un son
plus ”net” placer un cous-
sin ou une couverture dans
le bas de la caisse, contre
la peau de frappe
Amplis de
basse
électrique
2,5 cm du haut–parleur, au
centre.
Attaque franche, domi-
nance graves.
2,5 cm du haut–parleur, sur
le bord de la membrane.
Attaque franche, son plus
aigu.
10 à 15 cm du haut–par-
leur, au centre.
Attaque franche, son plein
et équilibré.
60 à 90 cm du haut–par-
leur, au centre.
Attaque douce, son plus
aigu.
MONTAGE DU BETA 52A SUR UN PIED DE MICRO-
PHONE
L’adaptateur de pied intégré présente un système de verrouilla-
ge dynamique permettant d’ajuster la position du microphone
tout en empêchant qu’il glisse s’il est heurte’ par les baguettes
du batteur. Pour monter le microphone BET 52A sur un pied et
ajuster la position, procéder comme suit :
Visser l’adaptateur intégré sur le haut d’un pied de micro
-
phone (voir la figure 3). S’assurer que la vis de blocage
de l’adaptateur est desserrée. Régler a hauteur du pied.
Faire pivoter le microphone BETA 52A jusqu’a la position
désirée par rapport a la peau de la caisse ou au haut–
parleur.
Serrer la vis de blocage a la main (en la tournant vers la
droite) pour bloquer le microphone en position. NE PAS
serrer la vis en excès.
Si nécessaire, modifier légèrement la position du micro
-
phone sans desserrer la vis.
Brancher un câble de microphone sur le connecteur XLR
intégré.
1.
2.
3.
4.
5.
MODÈLE BETA 52
®
A
剩余11页未读,继续阅读
资源评论
qingguo1979
- 粉丝: 28
- 资源: 7296
上传资源 快速赚钱
- 我的内容管理 展开
- 我的资源 快来上传第一个资源
- 我的收益 登录查看自己的收益
- 我的积分 登录查看自己的积分
- 我的C币 登录后查看C币余额
- 我的收藏
- 我的下载
- 下载帮助
安全验证
文档复制为VIP权益,开通VIP直接复制
信息提交成功