没有合适的资源?快使用搜索试试~ 我知道了~
Shure舒尔ANIUSB-Matrix英文说明书.pdf
1.该资源内容由用户上传,如若侵权请联系客服进行举报
2.虚拟产品一经售出概不退款(资源遇到问题,请及时私信上传者)
2.虚拟产品一经售出概不退款(资源遇到问题,请及时私信上传者)
版权申诉
0 下载量 198 浏览量
2023-02-11
19:03:14
上传
评论
收藏 1.28MB PDF 举报
温馨提示
试读
33页
Shure舒尔品牌说明书
资源推荐
资源详情
资源评论
ANIUSB-Matrix
Audio Network Interface
Complete user guide for the ANIUSB-MATRIX. Includes system diagrams, specifications, installation instructions, command strings, and
more.
Version: 7.9 (2022-J)
Shure Incorporated
2/33
Table of Contents
ANIUSB-Matrix Audio Network Interface 4
Getting Started 4
Step 1: Connect to a Network and Discover in Designer 4
Step 2: Route Audio and Apply DSP 4
Step 3: Configure Audio 5
Get More Information 5
General Description 5
Hardware and Installation 5
Rear Panel 6
Power Over Ethernet (PoE) 7
Installation and Rack Mounting 8
Device Identification 10
What's in the Box 10
Controlling Devices with Shure Designer Software 10
Use Designer's Optimize Workflow 10
How to Update Firmware Using Designer 11
Firmware Versioning 11
Differences Between 3.x and 4.x Firmware 11
Connections and Signal Flow 12
Connecting the ANIUSB-MATRIX to a Computer 13
USB Device Type Settings 14
Mute Sync 14
Setting Up Mute Sync on the MXA310 and ANIUSB-MA-
TRIX 15
Overview of Shure Conferencing Devices 15
Audio Settings 16
Schematic View 17
Mute and Fader Groups 18
Adjusting Input levels 18
Adjusting Output Levels 18
Parametric Equalizer 19
Custom Presets 21
Matrix Mixer 22
Crosspoint Gain 22
Routing Channels 22
ANIUSB-MATRIX Default Routes 22
Using Call Status 22
Encryption 23
Networking and Dante 23
Switch and Cable Recommendations for Dante Network-
ing 23
Dante Flows for Shure Devices 24
Pushing Device Names to the Dante Network 24
Compatibility with Dante Domain Manager 24
Configuring IP Settings 25
Setting Latency 25
IP Ports and Protocols 25
Using Command Strings 26
Reset 26
Software Reset Options 27
Troubleshooting 27
Event Log 28
Contact Customer Support 29
Specifications 29
Optional Accessories and Replacement Parts 31
Shure Incorporated
4/33
•
•
•
•
•
•
1.
2.
3.
4.
5.
1.
2.
3.
4.
◦
◦
◦
ANIUSB-Matrix
Audio Network Interface
Getting Started
To control the ANIUSB-MATRIX, use Shure Designer software. After completing this basic setup process, you should be able
to:
Control the ANIUSB-MATRIX in Designer
Route audio to the ANIUSB-MATRIX in Designer
Use the matrix mixer to route audio signals
Before you get started, you'll need:
Cat5e (or better) Ethernet cable
Network switch that provides Power over Ethernet (PoE)
Shure Designer software installed on a computer. Download at www.shure.com.
Step 1: Connect to a Network and Discover in Designer
Connect the ANIUSB-MATRIX to a PoE port on the network switch using Cat5e (or better) cable.
Connect your computer running Designer to the network switch.
Open Designer, and check that you’re connected to the correct network in Settings.
Click Online devices. A list of online devices appears.
To identify devices, click the product icon to flash the lights on a device.
Step 2: Route Audio and Apply DSP
The easiest way to route audio and apply DSP is with Designer's Optimize workflow. Optimize automatically routes audio sig-
nals, applies DSP settings, turns on mute synchronization, and enables LED logic control for connected devices.
For this example, we’ll connect an MXA310 table array microphone.
Go to My projects > New to create a new project.
Select New > Room (live) to create a new room. Any online devices appear in the list. Drag and drop the ANIUSB-
MATRIX and MXA310 to add them to your room.
Select Optimize.
Check the audio routes and settings to make sure they fit your needs. You might need to:
Delete unnecessary routes.
Fine-tune DSP blocks as needed.
Test and adjust microphone coverage.
You can also route audio manually in Designer outside of the Optimize workflow, or use Dante Controller.
Shure Incorporated
5/33
1.
2.
3.
4.
Step 3: Configure Audio
The final configuration steps vary depending on what other devices you connect to the ANIUSB-MATRIX.
Connect other analog and USB devices to the ANIUSB-MATRIX. If you have a computer with videoconferencing soft-
ware, connect it to the USB port.
Go to Matrix mixer to route audio between ANIUSB-MATRIX inputs and outputs. You can send a single input to many
outputs or vice versa. To send audio from the MXA310 to the computer, check the box where Dante Input 1 and USB
Output intersect.
Perform a sound check and adjust input and output levels in Designer.
Apply equalization (EQ) as needed to improve speech clarity.
Get More Information
Learn more about the ANIUSB-MATRIX in the Designer Help section or in the complete user guide at pubs.shure.com/guide/
ANIUSB-Matrix.
General Description
The ANIUSB-MATRIX Audio Network Interface provides connections for USB, Dante , and analog audio sources. Collaborate
and connect with all audio devices on a single network, with support for wireless microphones, computers, mobile devices,
video codecs, and loudspeaker systems. Connect with a single network cable to receive audio and power through Power over
Ethernet (PoE). Use Shure Designer software to control audio and network settings from any computer connected to the same
network.
™
剩余32页未读,继续阅读
资源评论
qingguo1979
- 粉丝: 28
- 资源: 7300
上传资源 快速赚钱
- 我的内容管理 展开
- 我的资源 快来上传第一个资源
- 我的收益 登录查看自己的收益
- 我的积分 登录查看自己的积分
- 我的C币 登录后查看C币余额
- 我的收藏
- 我的下载
- 下载帮助
安全验证
文档复制为VIP权益,开通VIP直接复制
信息提交成功