Clarion歌乐DCZ625安装手册.pdf
版权申诉
123 浏览量
2023-02-11
08:52:51
上传
评论
收藏 424KB PDF 举报
H: Horizontal
Align the installation selector le-
vers on both sides of the unit with
the “H” position.
45°
V
H
4
5
°
30°
15°
V
H
45°
V
H
45°
V
H
4
5°
15°
15°
45°
V
H
45°
15
°
30°
V
H
280-7715-00
6 DISC CD CHANGER WITH
CD TEXT Owner’s manual
Thank you for purchasing the DCZ625 system. The
DCZ625 is designed incorporating the latest digital
technologies, while featuring a newly developed CD
mechanism to achieve excellent performance and
good reliability.
Please read this owner’s manual entirely before proceed-
ing with installation.
1
FEATURES
2
PRECAUTIONS
1. This unit does not operate independently. The unit must be used with a source unit that has a cable connec-
tion for CeNET wire bound (sold separately).
2. CD singles cannot be used.
3. ● The pickup, the heart of a player, is built in deep behind the door. Do not leave this door open for extended
periods to prevent dust adhering to the pickup.
● When the inside of the car is very cold and the player is used soon after switching on the heater, dew may
form on the disc or optical parts of the player and proper playback may not be possible. If dew forms on
the disc, wipe it with a soft cloth. If dew forms on the optical parts of the player do not use the player for
about one hour and the condensation will disappear naturally to allow normal operation.
4. While the system is in play, do not plug or unplug the cables as this will cause damage.
5. This unit is compatible with CD TEXT. When it is connected to a center unit suitable for CD TEXT display, CD
TEXT can be displayed. (When it is connected to a center unit without CD TEXT function, CD TEXT can not
be displayed.)
6. Do not expose the magazine to direct sunlight, the car heater or other sources of strong heat. Replace the
CD magazine (CAA-397) with a new one if bent or otherwise damaged.
4
IDENTIFICATION OF PARTS
1 Installation selector levers
2 Eject button
Press the eject button for ejecting the magazine.
3 Flip down door
4 CeNET terminal for input and output
(13-pin)
5 Digital optical fiber output terminal
6 Address switch
When connecting an CD changer and MD changer
by CeNET, no more than 2 units can be connected.
When both of them are CD, the address switch needs
to be reset so that the address switch number is not
the same for each.
<How to change the address switch>
Switch the address by using a plastic stick with a sharp
tip or equivalent.
6
SYSTEM EXAMPLE
Installation Procedure
1. Use the double seamed hexagonal bolts to fix
installation bracket to the unit (on both sides) in
the desired direction of installation.
2. Use the wing nut to hold in place the installation
bracket with bolt to the installation bracket, which
is attached to the unit. Then affix the cushion rub-
ber.
9
TROUBLESHOOTING
Loss of power
Connection with
the source unit is
not recognized.
Magazine cannot
be loaded.
“No Disc” sign
appears when
searching for
discs.
Noise, skipping
Mechanism does
not function.
Magazine is
ejected evenwhen
inserted into the
unit.
Bad connection.
The length of the CeNET
cable wiring is more than
65.62 ft (20m).
Address switch num-
bers are the same.
Magazine inserted
wrongly.
A magazine is already
in the player.
Distorted magazine.
Disc inserted upside-
down.
Moisture or dirt on disc.
The installation selec-
tor levers are set to dif-
ferent positions on
both sides.
The unit installation di-
rection and the instal-
lation selector lever po-
sitions do not match.
Disc bent or badly
damaged.
Disc is very dirty.
Mechanical error.
Disc holder is not cor-
rectly inserted into the
magazine.
Check connections. Connect the cable again.
Rewire the connection so that the length of cable is less than 65.62 ft
(20m).
When the 2 CD changers are connected, set the address switch so
that they do not have the same address number. Refer to the “Exam-
ple of address switch setting” in the section titled “IDENTIFICATION
OF PARTS”.
Insert correctly.
Eject the magazine and insert the other.
Buy New Magazine CAA-397.
Read the section on “Inserting The CD” carefully and reinsert the CD
correctly.
Wipe disc free of moisture and dirt.
Set the installation selector levers to the same position on both sides.
Set the unit installation direction and the installation selector lever
positions to match each other. When installed at an angle, change the
installation selector lever to a position (H, 45˚, V) not prone to noise or
sound loss.
Compare with another disc. If bad, discard the damaged disc.
Clean the disc.
1. Referring to section “INSTALLATION”, check the three angle of in-
stallation selector levers are properly set. If not, set them at the
proper position for the angle of installation.
2. Check whether The CD magazine can be ejected by pressing the
CD magazine eject button, then insert a new CD magazine.
Read the section on “Inserting the CD” carefully and reinsert the disc
holder correctly.
lf the same phenomenon still occurs after checking the above, or it is impossible to remove the magazine, please
consult your local dealer.
10
SPECIFICATIONS
Clarion Co.,Ltd.
All right Reserved. Copyright © 2001:Clarion Co., Ltd.
● 6-Disc Capability
● CeNET with Balanced Audio Line Transmission
and Dynamic Noise Canceling
● 8-Times Oversampling Digital Filter
● Dual 1-Bit D/A Converters
● Zero-Bit Detector
™
Mute Circuit
● 3-Beam Laser System
● Spring-Loaded Silicon Oil-Dampened Suspension
System
● Eject Capability While lgnition-Off
● 120˚ Mounting Capability
● Optical Digital Output
● CD TEXT
● Dimensions:
8-7/8"(225mm)W × 2-1/"2(63mm)H
× 6-9/16"(167mm)D
• The unit may not operate when both CD
changers are set to the same address switch
number.
• Never change the address switch during op-
eration. Doing so can cause malfunction or
breakdown. Do not change the address switch
forcibly, because this may also cause
malfunciton.
This unit is available for upgrade in various ways.
When you want to upgrade the system, make sure that the upgrade unit fits and wire it correctly.
8
INSTALLATION
Prior to Installation
1. Before attempting to use this unit you must first
remove the packing safety lock pins (3 posi-
tions). Store these lock pins carefully so they
can be used again if needed.
Note:
• Reinstall these lock pins when shipping the unit back
for repair.
English
Frequency Response : 5Hz~20kHz(±1dB)
Signal-to-Noise Ratio : 105dB(1kHz)IHF•A
Wow and Flutter : Below measurement limits
Power Supply : DC14.4V (10.8~15.6V) negative ground
Current Consumption : Less than 1A
Unit Weight : 3.6lb. (1.65kg)
Dimensions : 8-7/8"(Width) × 2-1/2" (Height) × 6-9/16"(Depth)
[225mm(W) × 63mm(H) × 167mm(D)]
∗Due to improvements, the design and these specifications may be modified without prior notice.
Caution
3
CAUTIONS ON HANDLING CDs
●The following magazines cannot be used for this unit. Using them will result in a damage to the
mechanism and cause the magazine not to eject.
• magazine (CAA-122) for the 12-disc CD changer (CDR1255z, CDR1240Z, CDC1235, etc.)
• magazine (CAA-355) for the 6-disc CD changer (CDR655Tz, CDR655z, CDR640Z, etc.)
Caution
● Setting example 2
<Example of address switch setting>
CD changer
CD changer
Address switch
number 1
Address switch
number 2
Important
Be sure that the CD changer
numbers are not the same.
Source unit
CD changer
MD changer
Address switch
number 1
Do not use the address switch
numbers “3” and“4”for the
MD changer.
Address switch
number 1
● Setting example 1
CeNET wire bound
CeNET wire bound
Source unit
Important
1
2
1
1
7
INSTALLATION OF CONNECTORS
Caution
Note:
Only the provided screws and brackets should be used during installation. Us-
ing screws other than those specified will cause damage.
• When connecting the CeNET cable, fully insert it. After connection, fix
the connector with a clamper as shown in the figure.
• When removing the digital optical fiber cable, rotate it to loosen it and
pull it gently while holding the slide cap (a gray color part on the source
unit).
• Do not coil up the digital optical fiber cable with a radius of less than 1"
(3 cm). With a radius of less than 1", the performance of the cable will
be greatly impaired.
• When installed in a glove box or console box, make sure that the source
unit cables or cords do not interfere with the opening or closing of the
flip down door.
5
CD MAGAZINE
Inserting the CD
Caution
• Pulling strongly on the disc holder may cause it
to come out of the magazine. In such cases,
press in on the disc holder tabs and re-insert
into the magazine. Be sure that the disc holder
is correctly inserted.
Magazine
Disc Holder
Caution
Handling
● New discs may have some roughness around the
edge. The set may not work or the sound may
skip if such discs are used. Use a ball-point pen,
etc., to remove roughness from the edge of the
disc.
Ball-point pen
Roughness
● Never stick labels on the surface of the compact
disc or mark the surface with a pencil or pen.
● Never play a compact disc with any cellophane
tape or other glue on it or with peeling off marks.
If you try to play such a compact disc, you may
not be able to get it back out of the CD player or it
may damage the CD player.
● Always handle the compact disc by the edges.
Never touch the surface.
• Look through the magazine opening and
check whether or not the CD is tilted.
If the disc holder does not slide in fully, or
slides with difficulty, it is possible that the CD
is not correctly loaded. Reload in such cases.
This equipment has been tested and found to com-
ply with the limits for a Class B digital device, pursu-
ant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable pro-
tection against harmful interference in a residential
installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may
cause harmful interference to radio communications.
However, there is no guarantee that interference will
not occur in a particular installation. If this equipment
does cause harmful interference to radio or televi-
sion reception, which can be determined by turning
the equipment off and on, the user is encouraged to
consult the dealer or an experienced radio/TV tech-
nician for help.
Use only compact discs bearing the mark and the mark.
Do not play heart-shaped, octagonal, or other specially shaped compact discs.
Printed in China 2001/6 (T.C) PE-2433B 280-7715-00
● Do not use commercially available CD protection
sheets or discs equipped with stabilizers, etc.
These may get caught in the internal mechanism
and damage the disc.
Storage
● Do not expose compact discs to direct sunlight or
any heat source.
● Do not expose compact discs to excess humidity
or dust.
● Do not expose compact discs to direct heat from
heaters.
Cleaning
● To remove fingermarks and dust, use a soft cloth
and wipe in a straight line from the center of the
compact disc to the circumference.
● Do not use any solvents, such as commercially
available cleaners, anti-static spray or thinner to
clean compact discs.
● After using special compact disc cleaner, let the
compact disc dry off well before playing it.
2. Decide on the installation place and direction.
3. Insert an item such as a screwdriver with a fine
point or the tip of a ballpoint pen into the round
hole of the installation selector lever to switch to
the position you need.
45°
V
H
∗ Before shipment from the factory, the levers are nor-
mally placed in the horizontal position.
45˚: Slope
Align the installation selector le-
vers on both sides of the unit with
the “45°” position.
V: Vertical
Align the installation selector le-
vers on both sides of the unit with
the “V” position.
USE OF CONTROLS, ADJUSTMENTS, OR PER-
FORMANCE OF PROCEDURES OTHER THAN
THOSE SPECIFIED HEREIN, MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE.
THE COMPACT DISC PLAYER SHOULD NOT BE
ADJUSTED OR REPAIRED BY ANYONE EXCEPT
PROPERLY QUALIFIED SERVICE PERSONNEL.
CHANGES OR MODIFICATIONS NOT EX-
PRESSLY APPROVED BY THE MANUFACTURER
FOR COMPLIANCE COULD VOID THE USER’S
AUTHORITY TO OPERATE THE EQUIPMENT.
INFORMATION FOR USERS:.
CHANGES OR MODIFICATIONS TO THIS PROD-
UCT NOT APPROVED BY THE MANUFACTURER
WILL VOID THE WARRANTY AND WILL VIOLATE
FCC APPROVAL.
Extracting the CD
Take out the CD after pulling out the disc holder.
Note:
• When taking out the CD do not let your fingers touch
the signal side of the CD.
• Dust and other objects may cause malfunc-
tions if they get into the unit.
Always be sure to shut the flip down door once
finished with loading or unloading the maga-
zine.
Caution
Extracting the Magazine
1. Open the flip down door.
2. Press the eject button and take out the magazine.
Inserting the Magazine
1. Open the flip down door.
2. Insert the magazine (facing up as shown below)
into the unit with the CD load/unload side on the
right. Press the magazine into the unit until it locks
securely.
3. Close the flip down door.
• Set the installation selector lever to the same position on both sides.
• When the unit is installed below the horizontal position (up to 15 degrees) the ejected magazine,
when left in that position, will drop due to vibrations from the car.
• Adjust the installation selector levers into the correct locations. Setting the locations incorrectly or
in varied positions will cause skipping.
• Do not move the installation selector levers while the unit is in use. This will cause damage to the
mechanism and the disc.
Symptom RemedyCause
1
2
• The CeNET cable wiring must be less than 65.62
ft (20m) in length.
Lever
Release
knob
Label side
STANDARD SYSTEM
FULL SYSTEM
Souce unit
Souce unit
CeNET cable
(Included the DCZ625)
CeNET cable
(Included the DCZ625)
CeNET cable
(Included the Clarion expanded digital
sound processor / equalizer DSP/EQ)
Clarion expanded digital
sound processor / equalizer
(DSP/EQ)
Digital optical fiber cable
(Sold separately)
Digital optical fiber cable
(Sold separately)
Ferrite clamp
(Included the MD changer)
Y-adapter
(CCA-519: Sold separately)
CD deck or MD deck
DCZ625
DCZ625
MD changer
Gray
Gray
Black
Black
3. Remove the floor carpet and decide on the place
to install. Adjust the installation bracket with bolts
to suit the place of installation.
4. Remove the separator of the cushion rubber that
is attached to the installation bracket with bolt and
install accordingly.
5. Unfasten the wing nut and remove the unit.
6. Return the floor carpet to its original place. Use a
knife to cut into the carpet where the bolt can be
felt, and allow the bolt to protrude from the carpet.
7. Align the unit with the bolts and secure it with the
wing nuts.
<Vertical Position>
<Suspending Position>
<Horizontal Position>
Floor carpet
3. Press in on the disc holder until it locks securely
into the magazine. After loading a CD, make sure
that it is correctly loaded.
2. Insert a CD into the concave portion of the
disc holder with its label side (printed side
with a title, etc.) facing up.
1. Put your finger on the disc holder release
knob and draw out the disc holder.
Magazine
Disc holder
Release
knob
Flip down door
Magazine face
1.
2.
CAUTION
1.Be sure to use the screws,etc., included in the package for installa-
tion. Using other screws could damage the set.
2.
Set the selectors on both side panels to the “H” Position when
installing the set horizontally, to the “V” position when installing the
set vertically. When installing at the angle of 45˚, set the selectors to
the center click position.
The set may be damaged if the selectors are not set to the proper
positions.
ISO
8
12V GROUND
MODEL
Clarion Co.,Ltd.
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDI-
TIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFER-
ENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE
RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE
UNDESIRED OPERATION.
THIS PRODUCTION COMPLIES WITH DHHS RULES 21 CFR SUB-
CHAPTER J APPLICABLE AT DATE OF MANUFACTURE.
CLARION CO.,LTD.
50 KAMITODA, TODA-SHI, SAITAMA-KEN, JAPAN.
H
V
051 722 877
SERIAL No.
CLASS 1
LASER PRODUCT
MANUFACTURED:
PE-
286-
4
5
MADE IN
Screws
M5 × 8 W-SEMS
Flip down door
Eject button
DCZ625
资源评论
