Page 5
INTONATO DC Operation Manual
Overview
6. INFO Button
Pressing this button at any time will return to the Info (“Home”) screen. The Info screen displays
monitor volume, aux volume, individual speaker solo/mute indication, clock source, sample rate,
and controller status (clipping, clock source errors, etc.).
7. BASS MGMT Button
This is a global bass management on/off button. When enabled, the incoming signal will be split at
the configured bass management crossover frequency: the upper frequencies will be sent to the
satellite speakers configured for bass management, and the lower frequencies will be sent to the
subwoofer(s).
When disabled, the satellite speakers configured for bass management will receive a full-range
signal, and the subwoofer(s) will not receive any bass managed signal. Note that assigned LFE
channels will still be routed to the subwoofer(s).
NOTE: The state of the Bass Management button is stored to the profile. After a power cycle,
the profile will be loaded and this button will return to its stored state.
8. MASTER DIM Button
Pressing this button will dim (attenuate) the speaker system by the dim level amount configured in
the Intonato 24 device. The aux outputs will not be affected by the
MASTER DIM button.
9. MASTER MUTE Button
Pressing this button will mute all speaker outputs configured for master volume control in the
intonato 24 device. The aux outputs will not be affected by the
MASTER MUTE button.
10. SCENE Button
Scenes are used to select between sources or speaker systems for monitoring, or for monitoring
fold-down mixes. Press the
SCENE button then use the NEXT, PREV, and OPTION buttons to
select the desired scene for recall. When the
SCENE button is illuminated, the OPTION buttons
may be held to modify the order of scenes in the display. See
“Modifying the Scene Order” on
page 17
for more information.
11. SPKR SOLO Button
Press this button to bring up all available speaker outputs in the LCD. Each speaker output can
then be soloed using the corresponding
OPTION buttons. When a channel is soloed, all non-
soloed channels will be muted. Pressing the
PREV and NEXT buttons will navigate screens to
display additional speaker outputs. Multiple channels can be soloed simultaneously.
12. SPKR MUTE Button
Pressing this button will bring up all available speaker outputs in the LCD. Each speaker output
can then be muted using the corresponding
OPTION buttons. Pressing the PREV and NEXT
buttons will navigate screens to display additional speaker outputs. Multiple channels can be
muted simultaneously.
13. TALKBACK Button
When the Intonato 24 is configured for talkback functionality, pressing and holding this button will
activate the talkback mic for as long as the button is held. When talkback is enabled, the signal
from the Intonato 24’s XLR mic input will be fed to the stereo aux output.
