7个范例程序的测试结果
1、字符模式设备范例.txt
--上位机串口波特率115200,在硬件上全速运行程序后控制台收到:
This application will printf 'Hello world' to uart1!
串口上收到:
hello world
2、Alarm范例.txt
--在my_alarm_callback()函数return前,加入了一条printf("CallCounter's Value is %d!\n",CallCounter);，在硬件上全速运行程序后收到:
CallCounter's Value is 1!
3、ISR范例.txt
--在硬件上全速运行程序后收到:
ISR Demo!
Timer interrupt has occurred for: 0 times
Timer interrupt has occurred for: 1 times
Timer interrupt has occurred for: 2 times
Timer interrupt has occurred for: 3 times
…………
4、HighResTimer范例.txt
--在硬件上全速运行程序后收到:
Elapsed time in func1 = 993 us
Elapsed time in func1 = 4830 us
5、DMA范例.txt
--在SOPC Builder中建一个RAM型On-chip_memory命名为onchip_RAM_4K(也可取其它名)，建一个DMA命名为dma，将dma的read_master、write_master与onchip_RAM_4K连接.在硬件上全速运行程序后收到:
DMA Demo(Memory to Memory)!
Create the transmit channel successfully!
Create the receive channel successfully!
Post the transmit request successfully!
Post the receive request successfully!
6、Simple Flash Access驱动范例.txt
--在硬件上全速运行程序后收到:
Simple Flash Access Demo.
Open Flash Device Successfully.
Write Flash Device Successfully.
Read Flash Device Successfully.
Verify Successfully!
7、Fine-gained Flash Access驱动范例.txt
--在硬件上全速运行程序后收到:
Fine-gained Flash Access Demo.
Open Flash Device Successfully.
Erase Flash Device Successfully.
Write Flash Device Successfully.
Read Flash Device Successfully.
Verify Successfully!
Alarm范例程序经过修改之后，可以看到重复进my_alarm_callback()函数了
控制台显示结果为:
my_alarm_callback has been called for: 0 times
my_alarm_callback has been called for: 1 times
my_alarm_callback has been called for: 2 times
my_alarm_callback has been called for: 3 times
my_alarm_callback has been called for: 4 times
…………
NiosII范例.rar （9个子文件） 
NiosII范例 
字符模式设备范例.txt 525B
