shape转xyz格式插件 ShapetoXYZ

Shape To XYZ Conversion Tool Installation Instructions and User Guide The Shape To XYZ Conversion Tool is a MIKE by DHI Custom User Tool developed for the purpose of faciltiating the use of shape files as boundary lines in the Mesh Generator. The tool is capable of reading the geometric information from a point, polyline or polygon shape file and then generating an XYZ file in the format required by the Mesh Generator. This is a very simple tool with few options, so this document serves as both the Installation Instructions and User Guide. Installation Instructions ------------------------- All of the files required to run the Shape To XYZ Conversion Tool are included in the file “Shape2XYZ.zip”. These files include: • _Readme.txt • DHI.ShapetoXYZ.exe • DotSpatial.Data.dll • DotSpatial.Projections.dll • DotSpatial.Serialization.dll • DotSpatial.Topology.dll To install the Shape To XYZ Conversion Tool simply unpack all of these files to the folder where the tool will reside on your computer. This folder can have any name and be located anywhere on your computer, but for the sake of consistency it’s probably a good practice to save it to the following folder: C:\Program Files (x86)\DHI\UserTools\ShapetoXYZ Once all of the files are saved to the same folder on your computer, the tool is ready to use by simply initiating the file “DHI.ShapetoXYZ.exe” User Guide ---------- The Shape To XYZ Conversion Tool is a very simple and straight-forward tool with very few options, so the operation of the tool is very easy. There are essentially three steps for running the tool: Step 1: Selecting the shape file to be converted When the Shape To XYZ Conversion Tool is executed it will prompt for name and location of the shape file that is being converted. The shape file can be either a point, polyline or polygon shape file. Once the file is selected click the [Open] to load it to the tool. Step 2: Defining the Minimum Distance between points Once the shape file is loaded you will be prompted to define the Minimum Distance Between Points. Depending on the type and size of the shapes being converted, it may be desirable to have a minimum spacing between vertices of the lines describing each shape. These vertices will be used by the Mesh Generator to define the size of the mesh elements that are generated. Enter a value to define the Minimum Distance, or leave the field empty to simply use the points defined in the Shape file, then click the [OK] button to continue. Step 3: Defining the XYZ file name and location The last step in the conversion is to define the name and location of the XYZ file that is generated. Once this is completed, click the [Save] button to execute the conversion. If the shape file contains elevation information in the Z field it will also be converted to the XYZ file and will be available for use in the Mesh Generator.