WONDERFUL LIFE
Instruction for use
Make up, replenish water and nano Spa
Thank you for purchasing this product, in order to
make you use the product better,please read this
manual before use.
1.operational guideline
1.Turn the tank cover by turning it counterclockwise.
Drop the face essence into the robot borrle.
2.Remove the water tank cover,with a special
waterbottle to the water tank to add mineral water.
3.Turn the tank cover clockwise.
4.Slide the slider switch gently down,spray jet will
immediately emit aerosol nanoparticles,while the
indicator light woll ge lit. The best use of the distance
is15cm.
2.Working principle
Hi-Tech chip controlled mode and nano-
atomized water,molecule can be 0.3 to 0.5um
Size ,Quickly penetrate the face and enter
the basallamina, to improve face' s ability to
absorb nutrients.
3.Product parameters and specifications
Part name: Face nano SPA robot
Conditions of use: Charge plus liquid
Atomization: 1.2ml - 1.8ml/min
Water tank Capacity: 7ml
Voltage: 3.7V
Battery capacity: 200mAH
Charging time: 40minutes
Full charge time available: 40minutes
Atomizing particles: 0.3um
Product size: 32*82mm
Product weight: 37.5g
4.Product instruction
The first time you use this instrument,please
firstfully charged,you can charge directly or
USB charge. The indicator light turns red,
indicating that the instrumentis charging,the indicator
light is off, indicating that the instrument is full
(theinstrumentcan't beused when charging).
5.Maintenance of the instrument:
1.After use,Please clean the machine in time to
prevent grease and other dirt precipitation
with a soft damp cloth to clean the product
surface,and then dry it.
2.Do not use oil,gasoline,or corrosive
cleaning agent to clean the plastic member.
3.Do not put the product in high temperature,
humid environment, so as not to affect the
useof results.
4.When the instrument is not used for a long
time, clean the tank and store it in a cool,
dryplace.
6.Causes of spray faults and elimination
methods
Fault phenomenon
Solution
The instrument
does not work
Not enough power,
please recharge.
The instrument
is turned on
and light's
bright but
not sprayed
Open the head cover
clockwise
Open the spray head
cover
1. There is no liquid in
the tank, open
the tank cover
and re-install it.
2. Spray jet with the
liquid, need to use
cotton swab or paper
towel gently dry.
3.Spray jet blocked,
with water to clean
the tank.
The instrument
has leaks.
The tank cover is not
tightened,
please tighten it.
1 2
Add water or essence Tighten the head
cover
3 4
Put the essence
in place
Slide the switch
down
5 6
Take care of your
eyes
Bottom charging port
7 8
资源评论
