MT2523-HDK-Product-Brief
132 浏览量
2024-03-10
14:30:23
上传
评论
收藏 523KB PDF 举报
LinkIt 2523 HDK Product Brief
© 2015 – 2016 MediaTek Inc.
This document contains information that is proprietary to MediaTek Inc. (“MediaTek”) and/or its licensor(s).
Any unauthorized use, reproduction or disclosure of this document in whole or in part is strictly prohibited.
Description
The LinkIt 2523 HDK by SAC is a fully functional
demonstration board for IoT and Wearables applications
powered by MediaTek MT2523G, an ARM Cortex-M4 core-
based microcontroller unit (MCU). It enables rich
connectivity features, communication with cloud services
and real-time control. The HDK supports development on
Keil IDE and provides additional libraries to integrate a
variety of peripherals and enable a new class of highly
connected applications.
Supported Features
ARM Cortex-M4 core-based MT2523G microcontroller.
o Internal 160kB SRAM and 4MB PSRAM.
o Internal 4MB serial flash.
Flexible on-board power supply.
o USB with power 5V.
o External battery connector.
Rich interfaces.
o Three I
2
Cs.
o Four master SPIs and a slave SPI.
o One master I
2
S and one slave I
2
S.
o One PCM interface.
o Four UARTs. The first set of UART is directly
configured through pin headers, the other three
sets are software configurable.
o Five 12-bit ADCs.
o Six PWMs by alternative voltage level.
o Two SDMMCs.
o JTAG debugging support.
o Five sets of clock output channels.
Peripherals.
o One serial camera interface, up to 3-bit mode
image capture.
o Two display modes by serial interface with
240*240 pixels resolution and MIPI with 320*320
pixels resolution.
o Keypad supported to simulate buttons like volume
up/down, back, enter.
o Onboard speaker, onboard analog microphone
and audio jack.
User-friendly customization.
o Supports Bluetooth (2.4GHz) and GNSS with
onboard antenna connectivity and also an SMA
connector for dedicated external antenna
connectivity.
o Supports 2-wire SWD interface for debugging
purposes.
o Headers for convenient and accurate current
measurement.
Board Specifications
Recommended operating temperature: -40 to 85°C.
LinkIt 2523 HDK's front view
资源评论
